13 Altering Replication

This chapter describes how to alter an existing replication system. Table 13-1 lists the tasks often performed on an existing replicated system.

Table 13-1 Tasks performed on an existing replicated system

Task	What to do
Alter or drop a replication scheme	See"Altering a replication scheme" and "Dropping a replication scheme".
Alter a table used in a replication scheme	See "Altering a replicated table".
Truncate a table used in a replication scheme	See "Truncating a replicated table".
Change the replication state of a subscriber database	See "Setting the replication state of subscribers".
Resolve update conflicts	See Chapter 14, "Resolving Replication Conflicts".
Recover from failures	See Chapter 11, "Managing Database Failover and Recovery".
Upgrade database	Use the `ttMigrate` and `ttRepAdmin` utilities, as described in "Database Upgrades" in Oracle TimesTen In-Memory Database Installation Guide.

Altering a replication scheme

You can perform the following tasks without stopping the replication agent:

Create, alter or drop a user. These statements are replicated.
Grant or revoke privileges from a user. These statements are replicated.
Add a subscriber to the replication scheme. See "Creating and adding a subscriber database".
Add a PL/SQL object to the master database and implement its replication on subscribers. See "Adding a PL/SQL object to an existing replication scheme".

Use ALTER REPLICATION to alter the replication scheme on the master and subscriber databases. Any alterations on the master database must also be made on its subscribers.

Note:

You must have the ADMIN privilege to use the ALTER REPLICATION statement.

Most ALTER REPLICATION operations are supported only when the replication agent is stopped (ttAdmin -repStop). The procedure for ALTER REPLICATION operations that require the replication agents to be stopped is:

Use the ttRepStop procedure or ttAdmin -repStop to stop the replication agent for the master and subscriber databases. While the replication agents are stopped, changes to the master database are stored in the log.
Issue the same ALTER REPLICATION statement on both master and subscriber databases.
Use the ttRepStart procedure or ttAdmin -repStart to restart the replication agent for the master and subscriber databases. The changes stored in the master database log are sent to the subscriber database.

If you use ALTER REPLICATION to change a replication scheme that specifies a DATASTORE element, then:

You cannot use SET NAME to change the name of the DATASTORE element
You cannot use SET CHECK CONFLICTS to enable conflict resolution

This section includes the following topics:

Adding a table or sequence to an existing replication scheme
Adding a PL/SQL object to an existing replication scheme
Adding a DATASTORE element to an existing replication scheme
Dropping a table or sequence from a replication scheme
Creating and adding a subscriber database
Dropping a subscriber database
Changing a TABLE or SEQUENCE element name
Replacing a master database
Eliminating conflict detection
Eliminating the return receipt service
Changing the port number
Changing the replication route
Changing the log failure threshold

Adding a table or sequence to an existing replication scheme

There are two ways to add a table or sequence to an existing replication scheme:

When the element level of the replication scheme is TABLE or SEQUENCE, use the ALTER REPLICATION statement with the ADD ELEMENT clause to add a table or sequence. See Example 13-1.
When the element level of the replication scheme is DATASTORE, use the ALTER REPLICATION statement with the ALTER ELEMENT clause to include a table or sequence. See Example 13-2.

Example 13-1 Adding a sequence and a table to a replication scheme

This example uses the replication scheme r1, which was defined in Example 9-29. It alters replication scheme r1 to add sequence seq and table westleads, which will be updated on database westds and replicated to database eastds.

ALTER REPLICATION r1
  ADD ELEMENT elem_seq SEQUENCE seq
    MASTER westds ON "westcoast"
    SUBSCRIBER eastds ON "eastcoast"
  ADD ELEMENT elem_westleads TABLE westleads
    MASTER westds ON "westcoast"
    SUBSCRIBER eastds ON "eastcoast";

Example 13-2 Adding a sequence and a table to a DATASTORE element

Add the sequence my.seq and the table my.tab1 to the ds1 DATASTORE element in my.rep1 replication scheme.

ALTER REPLICATION my.rep1
  ALTER ELEMENT ds1 DATASTORE
    INCLUDE SEQUENCE my.seq
  ALTER ELEMENT ds1 DATASTORE
    INCLUDE TABLE my.tab1;

Adding a PL/SQL object to an existing replication scheme

To add a new PL/SQL procedure, package, package body or function to an existing replication scheme, complete these tasks:

Create the PL/SQL object on a master database. The CREATE statement is not replicated to subscribers.
Create the PL/SQL object on the subscribers
Grant privileges to the new PL/SQL object on the master database. The GRANT statement is replicated to the subscribers.

Adding a DATASTORE element to an existing replication scheme

You can add a DATASTORE element to an existing replication scheme by using the ALTER REPLICATION statement with the ADD ELEMENT clause. All tables except temporary tables, materialized views, and nonmaterialized views are included in the replication scheme if you do not use the INCLUDE or EXCLUDE clauses. See "Including tables or sequences when you add a DATASTORE element" and "Excluding a table or sequence when you add a DATASTORE element".

Example 13-3 Adding a DATASTORE element to a replication scheme

Add a DATASTORE element to an existing replication scheme.

ALTER REPLICATION my.rep1
  ADD ELEMENT ds1 DATASTORE
       MASTER rep2
       SUBSCRIBER rep1, rep3;

Including tables or sequences when you add a DATASTORE element

You can restrict replication to specific tables or sequences when you add a database to an existing replication scheme. Use the ALTER REPLICATION statement with the ADD ELEMENT clause and the INCLUDE TABLE clause or INCLUDE SEQUENCE clause. You can have one INCLUDE clause for each table or sequence in the same ALTER REPLICATION statement.

Example 13-4 Including a table and sequence in a DATASTORE element

Add the ds1 DATASTORE element to my.rep1 replication scheme. Include the table my.tab2 and the sequence my.seq in the DATASTORE element.

ALTER REPLICATION my.rep1
ADD ELEMENT ds1 DATASTORE
MASTER rep2
SUBSCRIBER rep1, rep3
INCLUDE TABLE my.tab2
INCLUDE SEQUENCE my.seq;

Excluding a table or sequence when you add a DATASTORE element

You can exclude tables or sequences when you add a DATASTORE element to an existing replication scheme. Use the ALTER REPLICATION statement with the ADD ELEMENT clause and the EXCLUDE TABLE clause or EXCLUDE SEQUENCE clause. You can have one EXCLUDE clause for each table or sequence in the same ALTER REPLICATION statement.

Example 13-5 Excluding a table or sequence from a DATASTORE element

Add the ds2 DATASTORE element to a replication scheme, but exclude the table my.tab1 and the sequence my.seq.

ALTER REPLICATION my.rep1
ADD ELEMENT ds2 DATASTORE
MASTER rep2
SUBSCRIBER rep1
EXCLUDE TABLE my.tab1
EXCLUDE SEQUENCE my.seq;

Dropping a table or sequence from a replication scheme

This section includes the following topics:

Dropping a table or sequence that is replicated as part of a DATASTORE element
Dropping a table or sequence that is replicated as a TABLE or SEQUENCE element

Dropping a table or sequence that is replicated as part of a DATASTORE element

To drop a table or sequence that is part of a replication scheme at the DATASTORE level, complete the following tasks:

Stop the replication agent.
Exclude the table or sequence from the DATASTORE element in the replication scheme.
Drop the table or sequence.

If you have more than one DATASTORE element that contains the table or sequence, then you must exclude the table or sequence from each element before you drop it.

Example 13-6 Excluding a table from a DATASTORE element and then dropping the table

Exclude the table my.tab1 from the ds1 DATASTORE element in the my.rep1 replication scheme. Then drop the table.

ALTER REPLICATION my.rep1
  ALTER ELEMENT ds1 DATASTORE
    EXCLUDE TABLE my.tab1;
DROP TABLE my.tab1;

Dropping a table or sequence that is replicated as a TABLE or SEQUENCE element

To drop a table that is part of a replication scheme at the TABLE or SEQUENCE level, complete the following tasks:

Stop the replication agent.
Drop the element from the replication scheme.
Drop the table or sequence.

Example 13-7 Dropping an element from a replication scheme and then dropping the sequence

Drop the SEQUENCE element elem_seq from the replication scheme r1. Then drop the sequence seq.

ALTER REPLICATION r1
  DROP ELEMENT elem_seq;
DROP SEQUENCE seq;

Creating and adding a subscriber database

You can add a new subscriber database while the replication agents are running. To add a database to a replication scheme, do the following:

Make sure the new subscriber database does not exist.

Apply the appropriate statements to all participating databases:

ALTER REPLICATION ...
  ALTER ELEMENT ...
    ADD SUBSCRIBER ...

On the source database (the master), create a user and grant the ADMIN privilege to the user:
```
CREATE USER ttuser IDENTIFIED BY ttuser;
User created.

GRANT admin TO ttuser;
```
Logged in as the instance administrator, run the ttRepAdmin -duplicate command to copy the contents of the master database to the newly created subscriber. You can use the -setMasterRepStart option to ensure that any updates made to the master after the duplicate operation has started are also copied to the subscriber.
Start the replication agent on the newly created database (ttAdmin -repStart).

Example 13-8 Adding a subscriber to a replicated table

This example alters the r1 replication scheme to add a subscriber (backup3) to the westleads table (step 2 above):

ALTER REPLICATION r1
  ALTER ELEMENT elem_westleads
    ADD SUBSCRIBER backup3 ON "backupserver";

Dropping a subscriber database

Stop the replication agent before you drop a subscriber database.

This example alters the r1 replication scheme to drop the backup3 subscriber for the westleads table:

Example 13-9 Dropping a subscriber for a replicated table

ALTER REPLICATION r1
  ALTER ELEMENT elem_westleads
    DROP SUBSCRIBER backup3 ON "backupserver";

Changing a TABLE or SEQUENCE element name

Stop the replication agent before you change a TABLE or SEQUENCE element name.

Change the element name of the westleads table from elem_westleads to newelname:

Example 13-10 Changing a table name

ALTER REPLICATION r1
  ALTER ELEMENT Eelem_westleads
    SET NAME newelname;

Note:

You cannot use the SET NAME clause to change the name of a DATASTORE element.

Replacing a master database

Stop the replication agent before you replace a master database.

In this example, newwestds is made the new master for all elements currently configured for the master, westds:

Example 13-11 Replacing a master database

ALTER REPLICATION r1
  ALTER ELEMENT * IN westds
    SET MASTER newwestds;

Eliminating conflict detection

In this example, conflict detection configured by the CHECK CONFLICTS clause in the scheme shown in Example 14-2 is eliminated for the elem_accounts_1 table:

Example 13-12 Eliminating conflict detection for a table

ALTER REPLICATION r1
  ALTER ELEMENT elem_accounts_1
    SET NO CHECK;

See Chapter 14, "Resolving Replication Conflicts" for a detailed discussion on conflict checking.

Eliminating the return receipt service

In this example, the return receipt service is eliminated for the first subscriber in the scheme shown in Example 9-29:

Example 13-13 Eliminating return receipt service for a subscriber

ALTER REPLICATION r1
  ALTER ELEMENT elem_waccounts
    ALTER SUBSCRIBER eastds ON "eastcoast"
      SET NO RETURN;

Changing the port number

The port number is the TCP/IP port number on which the replication agent of a subscriber database accepts connection requests from the master replication agent. See "Port assignments" for details on how to assign port to the replication agents.

In this example, the r1 replication scheme is altered to change the port number of the eastds to 22251:

Example 13-14 Changing a port number for a database

ALTER REPLICATION r1
  ALTER STORE eastds ON "eastcoast"
    SET PORT 22251;

Changing the replication route

If a replication host has multiple network interfaces, you may specify which interfaces are used for replication traffic using the ROUTE clause. If you need to change which interfaces are used by replication, you may do so by dropping and adding IP addresses from or to a ROUTE clause.

Example 13-15 Changing the replication route

In this example, the rep.r1 replication scheme is altered to change the priority 2 IP address for the master database from 192.168.1.100 to 192.168.1.101:

ALTER REPLICATION r1
  DROP ROUTE MASTER eastds ON "eastcoast"
             SUBSCRIBER westds ON "westcoast"
             MASTERIP "192.168.1.100"
  ADD ROUTE MASTER eastds ON "eastcoast"
            SUBSCRIBER westds ON "westcoast"
            MASTERIP "192.168.1.101" PRIORITY 2;

Changing the log failure threshold

Use the FAILTHRESHOLD attribute of the STORE parameter to reset the log failure threshold. Stop the replication agents before using ALTER REPLICATION or ALTER ACTIVE STANDBY PAIR to define a new threshold value, and then restart the replication agents.

See "Setting the log failure threshold" and "Setting the log failure threshold" for more information about the log failure threshold.

Altering a replicated table

You can use ALTER TABLE to add or drop columns on the master database. The ALTER TABLE operation is replicated to alter the subscriber databases.

If you use ALTER TABLE on a database configured for bidirectional replication, first stop updates to the table on all of the replicated databases and confirm all replicated updates to the table have been received by the databases before issuing the ALTER TABLE statement. Do not resume updates until the ALTER TABLE operation has been replicated to all databases. This is necessary to ensure that there are no write operations until after the table is altered on all databases.

Note:

You can use the ttRepSubscriberWait procedure or monitoring tools described in Chapter 12, "Monitoring Replication" to confirm the updates have been received and committed on the databases.

Also, if you are executing a number of successive ALTER TABLE operations on a database, you should only proceed with the next ALTER TABLE after you have confirmed the previous ALTER TABLE has reached all of the subscribers.

Note:

You can use the ALTER TABLE statement to change default column values, but the ALTER TABLE statement is not replicated. Thus default column values need not be identical on all nodes.

Truncating a replicated table

You can use TRUNCATE TABLE to delete all of the rows of a table without dropping the table itself. Truncating a table is faster than using a DELETE FROM table statement.

Truncate operations on replicated tables are replicated and result in truncating the table on the subscriber database. Unlike delete operations, however, the individual rows are not deleted. Even if the contents of the tables do not match at the time of the truncate operation, the rows on the subscriber database are deleted anyway.

The TRUNCATE statement replicates to the subscriber, even when no rows are operated upon.

When tables are being replicated with timestamp conflict checking enabled, conflicts are not reported.

Dropping a replication scheme

You can use the DROP REPLICATION statement to remove a replication scheme from a database. You cannot drop a replication scheme when master catchup is required unless it is the only replication scheme in the database.

Note:

You must have the ADMIN privilege to use the DROP REPLICATION statement.

You must stop the replication agent before you drop a replication scheme.

Example 13-16 Dropping a replication scheme

To remove the repscheme replication scheme from a database, enter the following:

DROP REPLICATION repscheme;

If you are dropping replicated tables, you must drop the replication scheme before dropping the replicated tables. Otherwise, you receive an error indicating that you have attempted to drop a replicated table or index.

Example 13-17 Removing a table and a replication from a database

To remove the tab table and repscheme replication scheme from a database, enter the following:

DROP REPLICATION repscheme;
DROP TABLE tab;