7 Data Guard Command-Line Interface Reference

ADD DATABASE

Creates a new standby database profile and adds it to the existing broker configuration. The AS CONNECT IDENTIFIER clause is optional. If you do not specify this clause, the broker will search the LOG_ARCHIVE_DEST_n initialization parameters on the primary database for an entry that corresponds to the database being added.

The MAINTAINED AS clause allows you the option of specifying the standby database type. Otherwise, the broker automatically determines whether the standby database type is a physical, logical, or snapshot standby database.

Format

ADD DATABASE database-name

[AS CONNECT IDENTIFIER IS connect-identifier]

Command Parameters

database-name

The name that will be used by the broker to refer to this standby database. It must match (case-insensitive) the value of the corresponding database DB_UNIQUE_NAME initialization parameter.

connect-identifier

A fully specified connect descriptor or a name to be resolved by an Oracle Net Services naming method (for example, TNS). The value you specify is also used as the initial value of the DGConnectIdentifier database property. If you do not specify this option, the broker will search the primary database LOG_ARCHIVE_DEST_n parameters for a corresponding entry to the standby database and use its SERVICE value for the connect-identifier.

Usage Notes

• To issue this command, you must connect to the primary database or to an enabled standby database that is already in the configuration.

• The broker uses the specified connect-identifier to communicate with the specified database from other databases. Therefore, you must ensure that the connect-identifier can be used to address the specified database from all databases in your configuration. For example, if TNS is used as the naming method, you must ensure that the tnsnames.ora file on every database and instance that is part of the configuration contains an entry for the connect-identifier. The connect identifier must resolve to the same connect descriptor. If the database that is being added is an Oracle RAC database, the connect-identifier provided here must reach all instances of the Oracle RAC, preferably with FAILOVER attributes set.

  See Also:

  Oracle Database Net Services Administrator's Guide

• If the connection cannot be made, the broker does not add the new database to the configuration.

• The MAINTAINED AS clause is deprecated in this release. The broker will determine standby database type automatically.

Command Example

Example 1   

The following example shows how to add a database named South_Sales.

DGMGRL> ADD DATABASE South_Sales AS CONNECT IDENTIFIER IS South_Sales.example.com;
Database "South_Sales" added

CONNECT

Connects a given username to the specified database.

Format

CONNECT username [@connect-identifier];

Command Parameters

username

Represents the username with which you want to connect to the database. You will be prompted for a password after you enter a username and optionally, a connect-identifier.

connect-identifier

This parameter is optional. It is an Oracle Net Services connect identifier for the database to which you want to connect. The exact syntax depends upon the Oracle Net Services communications protocol your Oracle installation uses.

Usage Notes

• The username and password must be valid for the database to which you are trying to connect. The username you specify must have the SYSDBA privilege. You do not have to include AS SYSDBA on the CONNECT command because SYSDBA is the default setting for this command.

• If the CONNECT command returns an error, check to see that you specified a valid connect-identifier.

Command Examples

Example 1   

This example connects to the default database on the local system.

DGMGRL> CONNECT sys;
Password: password
Connected.

Example 2   

This example connects to a remote database whose connect-identifier is North_Sales.example.com.

DGMGRL> CONNECT sys@North_Sales.example.com;
Password: password
Connected.

Example 3   

This example connects to a database using CONNECT '/' so that connection credentials are not visible on the command line:

DGMGRL> CONNECT /@North_Sales.example.com;

You must set up Oracle Wallet or SSL to use CONNECT '/'. By setting up Oracle Wallet or SSL, you can write a script to securely start and run the observer as a background job without specifying database credentials in the script.

See Also:

Oracle Database Advanced Security Administrator's Guide for more information about Oracle Wallet and SSL

CONVERT DATABASE

Converts a physical standby database to a snapshot standby database, or reverts the snapshot standby database back to a physical standby database.

A snapshot standby database is a fully updatable standby database. Like a physical or logical standby database, a snapshot standby database receives and archives redo data from a primary database. Unlike a physical or logical standby database, a snapshot standby database does not apply the redo data that it receives. The redo data received by a snapshot standby database is not applied until the snapshot standby is converted back into a physical standby database, after first discarding any local updates made to the snapshot standby database.

A snapshot standby database is best used in scenarios that require a temporary, updatable snapshot of a physical standby database. Note that because redo data received by a snapshot standby database is not applied until it is converted back into a physical standby, the time needed to perform a role transition is directly proportional to the amount of redo data that needs to be applied.

See Oracle Data Guard Concepts and Administration for additional information about snapshot standby databases.

Format

CONVERT DATABASE db_unique_name TO {SNAPSHOT | PHYSICAL} STANDBY;

Usage Notes

• A physical standby database cannot be converted to a snapshot standby database if it is the target of a fast-start failover. The ORA-16668: operation cannot be performed on the fast-start failover target standby database error will be returned.

• Use the DGMGRL ADD DATABASE command to import an existing snapshot standby database into a Data Guard broker configuration.

• A snapshot standby database cannot be the target of a switchover or a fast-start failover.

• A snapshot standby database can be the target of a manual failover if fast-start failover is disabled.

• You can use the SHOW CONFIGURATION or SHOW DATABASE command to verify the conversion result. For example:

  DGMGRL> SHOW CONFIGURATION;
   
  Configuration - DRSolution
   
    Protection Mode: MaxPerformance
    Databases:
      North_Sales  - Primary database
      South_Sales  - Snapshot standby database
   
  Fast-Start Failover: DISABLED
   
  Configuration Status:
  SUCCESS
  

• After a snapshot standby database is converted back to a physical standby database, it will be in the default state for a physical standby database, APPLY-ON.

Command Examples

Example 1   

Issue the following to convert a physical standby database to a snapshot standby database:

DGMGRL> CONVERT DATABASE 'South_Sales' to SNAPSHOT STANDBY;
Converting database "South_Sales" to a Snapshot Standby database, please wait...
Database "South_Sales" converted successfully

Example 2   

Issue the following to convert the snapshot standby database back to a physical standby database:

DGMGRL> CONVERT DATABASE 'South_Sales' to PHYSICAL STANDBY;
Converting database "South_Sales" to a Physical Standby database, please wait...
Operation requires shutdown of instance "south_sales1" on database "South_Sales"
Shutting down instance "south_sales1"...
Database closed.
Database dismounted.
ORACLE instance shut down.
Operation requires startup of instance "south_sales1" on database "South_Sales"
Starting instance "south_sales1"...
ORACLE instance started.
Database mounted.
Continuing to convert database "South_Sales" ...
Operation requires shutdown of instance "south_sales1" on database "South_Sales"
Shutting down instance "south_sales1"...
ORA-01109: database not open
 
Database dismounted.
ORACLE instance shut down.
Operation requires startup of instance "south_sales1" on database "South_Sales"
Starting instance "south_sales1"...
ORACLE instance started.
Database mounted.
Database "South_Sales" converted successfully

CREATE CONFIGURATION

Creates a new broker configuration and adds a primary database profile to the configuration.

Format

CREATE CONFIGURATION configuration-name AS

PRIMARY DATABASE IS database-name

CONNECT IDENTIFIER IS connect-identifier;

Command Parameters

configuration-name

A user-friendly name for the configuration you are creating. Valid names contain any alphanumeric characters. If spaces are included in the name, the name must be enclosed in double or single quotation marks. The name must consist of 30 or fewer bytes.

database-name

The name that will be used by the broker to refer to the primary database. It must match (case-insensitive) the value of the primary database DB_UNIQUE_NAME initialization parameter.

connect-identifier

A fully specified connect descriptor or a name to be resolved by an Oracle Net Services naming method (for example, TNS). The value you specify is also used as the initial value of the DGConnectIdentifier database property. If you do not specify this option, the broker will search the primary database LOG_ARCHIVE_DEST_n parameters for a corresponding entry to the standby database and use its SERVICE value for the connect-identifier.

Usage Notes

• A broker configuration is a named collection of one or more databases that you want to manage as a group. You must specify a value for each of the command parameters. There are no default values.

• You must connect to the primary database to issue this command.

• The broker uses the specified connect-identifier to communicate with the specified database from other databases. Therefore, you must ensure that the connect-identifier can be used to address the specified database from all databases in your configuration. For example, if TNS is used as the naming method, you must ensure that the tnsnames.ora file on every database and instance that is part of the configuration contains an entry for the connect-identifier. The connect identifier must resolve to the same connect descriptor. If the database that is being added is an Oracle RAC database, the connect-identifier provided here must reach all instances of the Oracle RAC, preferably with FAILOVER attributes set.

  See Also:

  Oracle Database Net Services Administrator's Guide

• To add standby databases after you create the broker configuration, use the ADD DATABASE command.

Command Example

Example 1   

The following example creates a new broker configuration named DRSolution with a primary database named North_Sales.

DGMGRL> CREATE CONFIGURATION 'DRSolution' AS
> PRIMARY DATABASE IS 'North_Sales'
> CONNECT IDENTIFIER IS North_Sales.example.com;
Configuration "DRSolution" created with primary database "North_Sales"

DISABLE CONFIGURATION

Disables broker management of a configuration so that the configuration and all of its databases are no longer managed by the broker.

Format

DISABLE CONFIGURATION;

Command Parameters

None.

Usage Notes

• A disabled configuration and all of its constituent databases are no longer managed by the broker.

• The only way to disable broker management of the primary database is to use the DISABLE CONFIGURATION command.

• This command does not remove the broker configuration from the configuration file. See the REMOVE CONFIGURATION command for more information about removing the configuration.

• You can edit database properties and modify the configuration's protection mode while the configuration is disabled. However, any changes made to properties or to the protection mode will not take effect until the configuration is enabled.

• This command cannot be executed if fast-start failover is enabled.

Command Example

Example 1   

The following example disables management of the broker configuration and all of its databases.

DGMGRL> DISABLE CONFIGURATION;
Disabled.

DISABLE DATABASE

Disables broker management of the named standby database. This means that broker directed state changes will be disallowed for this database, and the broker will not monitor the database for health status or for monitorable database properties.

Format

DISABLE DATABASE database-name;

Command Parameter

database-name

Name of the standby database to be disabled.

Usage Notes

• You cannot specify the name of a primary database.

• Use the DISABLE CONFIGURATION command to disable the primary and all standby databases.

• If the sole standby database is disabled, you have no failover option. This standby database is not viable for failover until it is reenabled.

• This command cannot be used to disable the fast-start failover target database when fast-start failover is enabled.

Command Example

Example 1   

The following example shows how to disable a database named South_Sales.

DGMGRL> DISABLE DATABASE 'South_Sales';
Disabled.

DISABLE FAST_START FAILOVER

Disables fast-start failover and prevents the observer from initiating a failover to the target standby database. See Section 5.5.5, "Disabling Fast-Start Failover" for additional information.

Format

DISABLE FAST_START FAILOVER [ FORCE ];

Command Parameters

None.

Usage Notes

• If the primary and target standby database have a network connection, use DISABLE FAST_START FAILOVER without the FORCE option to disable fast-start failover on all databases in the broker configuration. If errors occur during the disable operation, the broker returns an error message and stops the disable operation. You may need to reissue the DISABLE FAST_START FAILOVER command with the FORCE option to override the error conditions and disable fast-start failover on the database to which you are connected. See Section 5.5.5, "Disabling Fast-Start Failover" for more information.

• Use DISABLE FAST_START FAILOVER with the FORCE option when the network between the primary and target standby databases is disconnected or when the database upon which the command is received does not have a connection with the primary database. The FORCE option disables fast-start failover on the database to which you are connected, even when errors occur.

• Disabling fast-start failover with the FORCE option on a primary database that is disconnected from the observer and the target standby database does not prevent the observer from initiating a fast-start failover to the target standby database.

• You can disable fast-start failover while connected to any database in the broker configuration so long as connectivity exists between that database and the primary.

• If disabled by force at the target standby database and the connection subsequently resumes with the primary database, fast-start failover is disabled on all databases in the configuration.

• Disabling fast-start failover with the FORCE option while connected to the primary will disable fast-start failover on the target standby database if there is network connectivity between both databases.

Command Example

Example 1   

The following example shows how to disable fast-start failover.

DGMGRL> DISABLE FAST_START FAILOVER;
Disabled.

DISABLE FAST_START FAILOVER CONDITION

Allows a user to remove conditions for which a fast-start failover should be performed.

Format

DISABLE FAST_START FAILOVER CONDITION value;

Command Parameters

value

Possible values are those described in the SHOW FAST_START FAILOVER command as Health Conditions or Oracle error numbers.

Usage Notes

An error will be raised if the condition is not recognized. If the condition has not been set, no error will be raised.

Command Example

Example 1   

DISABLE FAST_START FAILOVER CONDITION "Corrupted Controlfile";

This specifies that the detection of a corrupted controlfile does not automatically initiate an immediate fast-start failover.

Example 2   

DISABLE FAST_START FAILOVER CONDITION 27102;

This specifies that the ORA-27102 error does not automatically initiate an immediate fast-start failover.

EDIT CONFIGURATION (Property)

Changes the value of a property for the broker configuration.

Format

EDIT CONFIGURATION SET PROPERTY property-name = value;

Command Parameter

property-name

The name of a configuration property.

value

The new value for the property.

Usage Notes

• Issue this command while connected to the primary database or to any standby database in the broker configuration having connectivity to the primary database.

• Use the SHOW CONFIGURATION command to display the current property information for the configuration.

Command Example

Example 1   

The following example shows how to set the FastStartFailoverThreshold configuration property to 90 seconds.

DGMGRL> EDIT CONFIGURATION SET PROPERTY FastStartFailoverThreshold=90;

EDIT CONFIGURATION (Protection Mode)

Edits the current protection mode setting for the broker configuration.

Format

EDIT CONFIGURATION SET PROTECTION MODE AS protection-mode;

Command Parameter

protection-mode

The data protection mode in which you want the configuration to run when the configuration is enabled. The possible protection modes are:

MAXPROTECTION
MAXAVAILABILITY
MAXPERFORMANCE

Usage Notes

• Before you use the EDIT CONFIGURATION command to set the protection mode to either the MAXPROTECTION or MAXAVAILABILITY mode, ensure that at least one standby database has its LogXptMode database property set to SYNC.

• The following table shows the configuration protection modes and the minimum corresponding settings for redo transport services:

  Protection Mode	Redo Transport	Standby Redo Log Files Needed?	Usable with Fast-Start Failover?
  MAXPROTECTION	SYNC	Yes	No
  MAXAVAILABILITY	SYNC	Yes	Yes
  MAXPERFORMANCE	ASYNC	Yes	Yes

  
  

  The default protection mode for the configuration is MAXPERFORMANCE.

  See Also:

  Chapter 4 for more information about the protection modes and redo transport services

• MAXAVAILABILITY or MAXPERFORMANCE is required in order to enable fast-start failover.

• This command cannot be executed if fast-start failover is enabled.

• After you change the protection mode, the broker will automatically restart the primary database, if necessary.

• Use the SHOW CONFIGURATION command to display the current protection mode for the configuration.

  DGMGRL> SHOW CONFIGURATION;
   
  Configuration - DRSolution
   
    Protection Mode: MaxPerformance
    Databases:
      North_Sales  - Primary database
      South_Sales     - Physical standby database
   
  Fast-Start Failover: DISABLED
   
  Configuration Status:
  SUCCESS
  

If broker management of the configuration is disabled when you enter the EDIT CONFIGURATION command, the protection mode of the configuration does not take effect until the next time you enable the configuration with the ENABLE CONFIGURATION command.

Command Example

Example 1   

The following example shows how to upgrade the broker configuration to the MAXAVAILABILITY protection mode.

Verify that standby redo log files are configured on the standby database and that the redo transport service is set to SYNC, for example:

DGMGRL> EDIT DATABASE 'South_Sales' SET PROPERTY 'LogXptMode'='SYNC';
Property "LogXptMode" updated
 
DGMGRL> EDIT CONFIGURATION SET PROTECTION MODE AS MAXAVAILABILITY;
Succeeded.

EDIT DATABASE (Property)

Changes the value of a property for the named database.

Format

EDIT DATABASE database-name

SET PROPERTY property-name = value;

Command Parameters

database-name

The name of the database for which you want to change a property value.

property-name

The name of an existing database-specific property. If this is an Oracle RAC database, this property change affects all instances of the database.

See Also:

Chapter 4 and Chapter 8 for information about properties.

value

The new value for the property.

Caution:

This command can be used to change the value of an instance-specific property if and only if just one instance is known by the broker for the named database. An attempt to use this command to change an instance-specific property when the broker knows of multiple instances of the database will be rejected. It is recommended to only use EDIT INSTANCE (property) to change the value of an instance-specific property.

Command Examples

Example 1   

Edit a configurable database-specific property at the database level.

DGMGRL> EDIT DATABASE 'North_Sales' SET PROPERTY 'ArchiveLagTarget'=1200;
Property "ArchiveLagTarget" updated

Example 2   

Edit a configurable instance-specific property of a non-Oracle RAC database.

DGMGRL> EDIT DATABASE 'South_Sales' SET PROPERTY 
> 'StandbyArchiveLocation'='/archfs/arch/';
Property "StandbyArchiveLocation" updated

Example 3   

Edit a configurable instance-specific property of an Oracle RAC database. This will not succeed because it is not clear to which instance the property change should be applied.

DGMGRL> EDIT DATABASE 'North_Sales' SET PROPERTY
> 'StandbyArchiveLocation'='/archfs/arch/';
Error: ORA-16587: ambiguous object specified to Data Guard broker

Failed.

EDIT DATABASE (Rename)

Changes the name used by the broker to refer to the specified database, as recorded in that database's profile in the broker configuration.

Format

EDIT DATABASE database-name

RENAME TO new-database-name;

Command Parameters

database-name

The name of the database that you want to change.

new-database-name

The name of the new database.

Usage Notes

• Use this command to track changes to the DB_UNIQUE_NAME initialization parameter for this database.

  Caution:

  The database-name must always match the value for that database's DB_UNIQUE_NAME initialization parameter.

• This command can only be done when broker management of the database that you are renaming is disabled.

Command Example

Example 1   

The following example shows how to edit and rename a database.

DGMGRL> DISABLE DATABASE 'South_Sales_typo';
Disabled.

DGMGRL> EDIT DATABASE 'South_Sales_typo' RENAME TO 'South_Sales';
Succeeded.

DGMGRL> ENABLE DATABASE 'South_Sales';
Enabled.

EDIT DATABASE (State)

Changes the state of the specified database.

Format

EDIT DATABASE database-name

SET STATE = state

[WITH APPLY INSTANCE = instance-name];

Command Parameters

database-name

The name of the database for which you want to change the state.

state

The state in which you want the database to be running. The possible states are:

TRANSPORT-ON (primary database only)
TRANSPORT-OFF (primary database only)
APPLY-ON (physical or logical standby database only)
APPLY-OFF (physical or logical standby database only)

instance-name

The name of the instance you want to become the apply instance if this is an Oracle RAC standby database.

Usage Notes

• If the target state is APPLY-ON and this database is currently a physical or logical standby database, the optional WITH APPLY INSTANCE clause specifies which instance will become the apply instance.

• If the target state is not APPLY-ON or if the database is currently in the primary role, the WITH APPLY INSTANCE clause is ignored even if it is specified.

• You cannot change the state of a snapshot standby database.

• All instances of an Oracle RAC database are affected by this database state change.

Command Example

The following examples show how to change the state of a database.

Example 1   

DGMGRL> EDIT DATABASE 'South_Sales' SET STATE='APPLY-ON';
Succeeded.

EDIT INSTANCE (AUTO PFILE)

Sets the name of the initialization parameter file for the specified instance.

Format

EDIT INSTANCE instance-name

[ON DATABASE database-name]

SET AUTO PFILE [= { initialization-file | OFF } ];

Command Parameters

instance-name

The name of the instance (SID) for which you want to specify its initialization parameter file.

database-name

The name of the database to which the instance-name is associated.

initialization-file

Executes the startup operation for the instance when a subsequent broker operation requires the instance to be started automatically. If SET AUTO PFILE is set to OFF, automatic restart of that instance is disabled. When a subsequent operation needs to start that instance, you must start it manually. If you do not specify SET AUTO PFILE for the instance, the automatic startup operation looks for the initialization parameter file at the default location.

Usage Notes

• The instance-name can be unique across the configuration. If instance-name is not unique, you must specify both the database-name and the instance-name to fully identify the instance.

• SET AUTO PFILE is valid only for the duration of the current DGMGRL session. You must specify SET AUTO PFILE again if you quit and reenter DGMGRL.

Command Example

Example 1   

The following example shows how to change the parameter file used to start an instance of a database.

DGMGRL> EDIT INSTANCE 'south_sales1' ON DATABASE 'South_Sales' 
> SET AUTO PFILE='initsales1.ora';
Instance 'south_sales1' updated

EDIT INSTANCE (Property)

Changes the value of an instance-specific property for the specified instance(s).

Format

EDIT INSTANCE { {instance-name [ON DATABASE database-name] } | {* ON DATABASE database-name} }

SET PROPERTY property-name = value;

Command Parameters

instance-name

The name of the instance (SID) for which you want to change an instance-specific property's value. If an asterisk is specified for instance-name, the ON DATABASE clause must also be specified and this change will be applied to the specified property for each instance associated with that database. See Chapter 8 for the instance-specific properties that can be changed using the EDIT INSTANCE * ON DATABASE database-name command.

database-name

The name of the database with which the instance-name is associated. This must be specified if an asterisk is specified for instance-name, or if instance-name is not unique across the configuration

property-name

The name of the instance-specific property for which you want to set a new value.

See Also:

Chapter 4 and Chapter 8 for information about properties.

value

The new value for the property.

Usage Notes

• The instance-name can be unique across the configuration. If instance-name is not unique, you must specify both the database-name and the instance-name to fully identify the instance.

• This command cannot be used to change a database-specific property.

Command Examples

Example 1   

Edit an instance-specific property.

DGMGRL> EDIT INSTANCE 'north_sales1' ON DATABASE 'North_Sales' 
> SET PROPERTY 'StandbyArchiveLocation'='/archfs/arch/';
Property "StandbyArchiveLocation" updated.

Example 2   

Edit a database-specific property. This will not be allowed.

DGMGRL> EDIT INSTANCE 'north_sales1' ON DATABASE 'North_Sales' 
> SET PROPERTY 'LogXptMode'='SYNC';
Error: ORA-16586: cannot change database property with EDIT INSTANCE command

Failed.

Example 3   

Change the value of an instance-specific property for all instances of an Oracle RAC database:

DGMGRL> EDIT INSTANCE * ON DATABASE 'North_Sales' LogArchiveTrace=4095;

ENABLE CONFIGURATION

Enables the broker to actively manage the broker configuration including all of its databases.

Format

ENABLE CONFIGURATION;

Command Parameters

None.

Usage Notes

• Use this command to enable broker management of the primary database and all standby databases, if these standby database are not explicitly disabled by the user.

• You must connect to the primary database to issue this command.

• By default, broker management of the configuration's databases is enabled in the TRANSPORT-ON state with redo transport services turned on at the primary database and APPLY-ON with log apply services started at the standby databases. You can change the state of a database using the EDIT DATABASE (State) command, but not when the database or the entire configuration is disabled.

• Use the SHOW CONFIGURATION command to display information about the configuration.

Command Example

Example 1   

The following example enables management of a broker configuration.

DGMGRL> ENABLE CONFIGURATION;
Enabled.

ENABLE DATABASE

Enables broker management of the specified standby database.

Format

ENABLE DATABASE database-name;

Command Parameter

database-name

The name of the standby database for which you want to enable broker management.

Usage Notes

• You must connect to the primary database or to an already enabled standby database to issue this command.

• A standby database may have been disabled by the broker as a consequence of a prior failover or switchover operation. See Section 5.4.3 to understand how the database can be reinstated or re-created.

• By default, broker management of the physical or logical standby database is enabled in the APPLY-ON state with log apply services enabled. You can change the state of the standby database using the EDIT DATABASE (State) command, but only when the database is enabled.

• Use the SHOW DATABASE command to display information about the database.

• For an Oracle RAC database, only one instance is required to be started and mounted for this command to succeed.

Command Example

Example 1   

The following example shows how to enable a database named South_Sales.

DGMGRL> ENABLE DATABASE 'South_Sales';
Enabled.

ENABLE FAST_START FAILOVER

Enables the broker to fail over to a specifically-chosen standby database in the event of loss of the primary database, without requiring you to perform any manual steps to invoke the failover. See Section 5.5.2, "Enabling Fast-Start Failover" for complete information.

Format

ENABLE FAST_START FAILOVER;

Command Parameters

None.

Usage Notes

• The prerequisites described in Section 5.5.1 must be met before you issue this command to enable fast-start failover.

• Issuing the ENABLE FAST_START FAILOVER command does not trigger a failover, it only allows the observer that is monitoring the configuration to initiate a fast-start failover if conditions warrant a failover.

• You can enable fast-start failover while connected to any database in the broker configuration.

• If you do not start the observer after you have enabled fast-start failover, the ORA-16819 warning is displayed for the primary and target standby databases. For example:

  DGMGRL> SHOW DATABASE 'South_Sales';
  Database - South_Sales
   
    Role:            PRIMARY
    Intended State:  TRANSPORT-ON
    Instance(s):
      south_sales1
   
    Database Warning(s):
      ORA-16819: fast-start failover observer not started
   
  Database Status:
  WARNING
  

• To enable fast-start failover for a broker configuration with multiple standby databases, the FastStartFailoverTarget configuration property on the primary database must be set to point to the desired target standby database. Both the primary database and the target standby database must have:

  • Standby redo logs configured

  • Either the LogXptMode database property set to SYNC and protection mode set to MAXAVAILABILITY, or the LogXptMode property set to ASYNC and the protection mode set to MAXPERFORMANCE

  • Flashback Database enabled on both the primary and standby databases

  Step 2 in Section 5.5.2 and Section 8.3.9 provide more information about the FastStartFailoverTarget configuration property.

• Once you have enabled fast-start failover, you must comply with the restrictions described in Section 5.5.2.2, "Restrictions When Fast-Start Failover is Enabled".

Command Example

Example 1   

The following example enables fast-start failover.

DGMGRL> ENABLE FAST_START FAILOVER;
Enabled.

Example 2   

The following example shows that fast-start failover was successfully enabled when the configuration is operating in maximum performance mode.

DGMGRL> SHOW FAST_START FAILOVER;
 
Fast-Start Failover: ENABLED
 Threshold:           30 seconds
 Target:              South_Sales
 Observer:            (none)
 Lag Limit:           30 seconds
 Shutdown Primary:    TRUE
 Auto-reinstate:      TRUE
 
Configurable Failover Conditions
 Health Conditions:
   Corrupted Controlfile          YES
   Corrupted Dictionary           YES
   Inaccessible Logfile            NO
   Stuck Archiver                  NO
   Datafile Offline               YES
 
 Oracle Error Conditions:
   (none)

ENABLE FAST_START FAILOVER CONDITION

Specifies additional conditions for which a fast-start failover should be performed.

Format

ENABLE FAST_START FAILOVER CONDITION value;

Command Parameters

value

Possible values are those described in the SHOW FAST_START FAILOVER command as Health Conditions or Oracle error numbers.

Usage Notes

• Possible values are the set maintained by the database health-check facility or a number corresponding to any ORA-xxxx error.

• While the conditions maintained by the health-check facility are subject to change in the future, some common examples are shown in Table 7-2:

  Table 7-2 Examples of Health Conditions

  Health Condition	Description
  "Datafile Offline"	Data file offline due to a write error.
  "Corrupted Controlfile"	Corrupted controlfile.
  "Corrupted Dictionary"	Dictionary corruption of a critical database object.
  "Inaccessible Logfile"	LGWR is unable to write to any member of a log group due to an I/O error.
  "Stuck Archiver"	Archiver is unable to archive a redo log because device is full or unavailable.

  
  

  The following are enabled by default: "Datafile Offline," "Corrupted Controlfile," and "Corrupted Dictionary." An error will be raised if the specified value is not recognized. If the condition has already been set, no error will be raised.

• You can display these configurable conditions with the SHOW FAST_START FAILOVER command.

Command Example

Example 1   

ENABLE FAST_START FAILOVER CONDITION "Corrupted Controlfile";

This specifies that a fast-start failover should be done if a corrupted controlfile is detected.

Example 2   

ENABLE FAST_START FAILOVER CONDITION 27102;

This specifies that a fast-start failover should be done if an ORA-27102 error is raised.

EXIT

Exits (quits) the command-line interface.

Format

EXIT;

Command Parameters

None.

Usage Notes

• This command has the same effect as the QUIT command.

• A database connection is not required to execute this command. However, if you are connected, this command breaks the connection.

Command Example

Example 1   

The following example demonstrates how to exit (quit) the command-line interface.

DGMGRL> EXIT;

FAILOVER

Invokes a failover that transitions the named (target) standby database into the role of a primary database. This type of failover is referred to as manual failover. See Section 5.4, "Manual Failover" for more information.

Format

FAILOVER TO database-name

[ IMMEDIATE ];

Command Parameters

database-name

The name of a physical, logical, or snapshot standby database that you want to fail over to the primary database role.

Usage Notes

• The specified standby database must be enabled before the primary database fails. However, an enabled standby database that was shut down can be a candidate for the failover operation. In this case, restart the standby database using DGMGRL STARTUP command, then issue the FAILOVER command.

• The failover operates on the specified standby database and changes its role to a primary database. Bystander standby databases (those not involved in the failover) remain in the standby role.

• Before you issue the FAILOVER command, verify that you are connected to the standby database that will become the new primary database. If necessary, issue a CONNECT command to connect to the standby database to which you want to failover.

• If the FAILOVER command is issued without any options, the standby database chosen as the failover target applies all unapplied redo it has received before changing to the primary role. This is referred to as a complete failover.

• If the broker configuration is operating in maximum protection mode, a manual failover operation will force the protection mode to be maximum performance. The redo transport service settings are unaffected. You need to restore the desired protection mode for the resulting configuration after the failover operation.

  Note:

  With fast-start failover, the broker preserves the protection mode that was in effect prior to the failover. The broker configuration cannot be in maximum protection mode while fast-start failover is enabled.

• If the FAILOVER command is issued with the IMMEDIATE option, no attempt is made to apply any unapplied redo that has been received. This option more likely results in lost application data even when standby redo log files are configured on the standby database. Additionally, any remaining standby databases in the configuration cannot function as such until they are reinstated or re-created. See Section 5.4.3 for more information.

• You can perform a manual failover or set up the broker to perform a fast-start failover. See the ENABLE FAST_START FAILOVER command for information about allowing the broker to automatically invoke failover, when conditions warrant a failover.

• If fast-start failover is enabled, you can perform a complete manual failover only to the fast-start failover target standby database and only if the fast-start failover target standby database is synchronized with, or within the lag limit of, the primary database, and only when the observer is started. You cannot perform an immediate manual failover when fast-start failover is enabled.

• If Flashback Database was enabled on the former (failed) primary database prior to the failover, the former primary database can be reinstated using the broker's REINSTATE command (see the REINSTATE DATABASE command).

  If failover was performed to a physical standby database, any other physical standby databases that were disabled by the failover can be reinstated if Flashback Database was enabled on the standby database and there are sufficient flashback logs available. See Section 5.4.3, "Reenabling Disabled Databases After a Role Change" for step-by-step instructions.

• The original primary database can only participate in the configuration as a standby database after it is reinstated or re-created.

  Caution:

  You should shut down the original primary database if it still has any active instances running prior to failing over.

  See Also:

  Section 5.4.3 about reenabling the original primary database so that it could serve as a standby database to the primary database

Command Examples

Example 1   

The following example performs a failover in which the standby database, South_Sales, transitions to the primary role:

DGMGRL> FAILOVER TO 'South_Sales';
Performing failover NOW, please wait...
Failover succeeded, new primary is "South_Sales"

DGMGRL> SHOW CONFIGURATION;
Configuration - DRSolution
 
  Protection Mode: MaxPerformance
  Databases:
    South_Sales - Primary database
    North_Sales - Physical standby database (disabled)
      ORA-16661: the standby database needs to be reinstated
 
Fast-Start Failover: DISABLED
 
Configuration Status:
WARNING

HELP

Displays online help for the Data Guard command-line interface.

Format

HELP [topic];

Command Parameter

topic

The topic for which you want to display help information. If you do not specify a topic, the command lists all of the topics and the format. Valid topics are:

ADD
CONNECT
CONVERT
CREATE
DISABLE
EDIT
ENABLE
EXIT
FAILOVER
HELP
QUIT
REINSTATE
REM
REMOVE
SHOW
SHUTDOWN
START
STARTUP
STOP
SWITCHOVER

Usage Notes

• A database connection is not required to execute this command.

Command Examples

Example 1   

The following example gets help on the EDIT commands.

DGMGRL> HELP EDIT;
 
Edits a configuration, database, or instance
 
Syntax:
 
  EDIT CONFIGURATION SET PROTECTION MODE AS
    {MaxProtection|MaxAvailability|MaxPerformance};
 
  EDIT CONFIGURATION SET PROPERTY <property name> = <value>;
 
  EDIT DATABASE <database name> SET PROPERTY <property name> = <value>;
 
  EDIT DATABASE <database name> RENAME TO <new database name>;
 
  EDIT DATABASE <database name> SET STATE = <state>
    [WITH APPLY INSTANCE = <instance name>];
 
  EDIT INSTANCE <instance name> [ON DATABASE <database name>]
    SET AUTO PFILE [ = {<initialization file path>|OFF} ];
 
  EDIT INSTANCE <instance name> [ON DATABASE <database name>]
    SET PROPERTY <property name> = <value>;
 
  EDIT INSTANCE * ON DATABASE <database name>
    SET PROPERTY <property name> = <value>;

QUIT

Quits (exits) the Data Guard command-line interface.

Format

QUIT;

Command Parameters

None.

Usage Notes

• This command has the same effect as the EXIT command.

• A database connection is not required to execute this command. However, if you are connected, this command breaks the connection.

Command Example

Example 1   

The following example shows how to quit (exit) the command-line interface.

DGMGRL> QUIT;

REINSTATE DATABASE

Reinstates a database as a new standby database in the broker configuration for the current primary database.

Format

REINSTATE DATABASE database-name;

Command Parameter

database-name

The name of the database that is to be reinstated in the broker configuration.

Usage Notes

• If the conditions for reinstatement described in Section 5.5.8 are not satisfied, the reinstatement will fail with an appropriate error status and the specified database will remain disabled.

• If the database-name specified is that of the old primary and fast-start failover is enabled, the old primary database will be reinstated as a standby to the new primary, and the fast-start failover environment will be updated to reflect the availability of the new standby database. It will accept redo data from the new primary database and be the target of a fast-start failover should the new primary database fail. Reinstatement occurs automatically if the observer is running unless the FastStartFailoverAutoReinstate configuration property is set to FALSE.

• This command does not require that fast-start failover be enabled. It can be used to reinstate an old primary database after a complete manual failover has been performed. It can also be used to reinstate a bystander standby database that had been disabled after either a complete or immediate failover.

• Issue this command while connected to any database in the broker configuration, except the database that is to be reinstated.

Command Examples

Example 1   

The following example reinstates the South_Sales database as a standby database in the broker configuration.

DGMGRL> REINSTATE DATABASE 'North_Sales';
Reinstating database "North_Sales", please wait...
Operation requires shutdown of instance "north_sales1" on database "North_Sales"
Shutting down instance "north_sales1"...
ORA-01109: database not open
 
Database dismounted.
ORACLE instance shut down.
Operation requires startup of instance "north_sales1" on database "North_Sales"
Starting instance "north_sales1"...
ORACLE instance started.
Database mounted.
Continuing to reinstate database "North_Sales" ...
Reinstatement of database "North_Sales" succeeded

REMOVE CONFIGURATION

Removes all of the broker configuration information, including all database profiles, from the Data Guard broker configuration file, and terminates broker management of all of the databases associated with the broker configuration.

Format

REMOVE CONFIGURATION [ PRESERVE DESTINATIONS ];

Command Parameters

None.

Usage Notes

• When you remove a broker configuration, management of all of the databases associated with that configuration is disabled.

• By default, the command removes the corresponding broker settings of the LOG_ARCHIVE_DEST_n initialization parameter on the primary database and the LOG_ARCHIVE_CONFIG initialization parameters on all databases in the configuration. To preserve these settings, use the PRESERVE DESTINATIONS option.

• This command does not remove or affect the actual primary or standby database instances, databases, datafiles, control files, initialization parameter files, server parameter files, or log files of the underlying Data Guard configuration.

• You cannot remove the configuration when fast-start failover is enabled.

Command Example

The following examples show a successful and an unsuccessful REMOVE CONFIGURATION command.

Example 1   Successful REMOVE CONFIGURATION Command

The following command shows how to remove configuration information from the configuration file.

DGMGRL> REMOVE CONFIGURATION;
Removed configuration
DGMGRL> SHOW CONFIGURATION;
Error: ORA-16532: Data Guard broker configuration does not exist
 
Configuration details cannot be determined by DGMGRL

Example 2   Unsuccessful REMOVE CONFIGURATION Command

The following command is unsuccessful because fast-start failover is enabled.

DGMGRL> REMOVE CONFIGURATION;
Error: ORA-16654: fast-start failover is enabled
 
Failed.

 
DGMGRL> SHOW CONFIGURATION;
 
Configuration - The SUPER cluster
 
  Protection Mode: MaxAvailability
  Databases:
    North_Sales  - Primary database
    South_Sales  - (*) Physical standby database
 
Fast-Start Failover: ENABLED
 
Configuration status:
SUCCESS

REMOVE DATABASE

Removes the specified standby database's profile from the broker configuration and terminates broker management of the standby database.

Format

REMOVE DATABASE database-name [ PRESERVE DESTINATIONS ];

Command Parameter

database-name

The name of the standby database whose profile you want to remove from the broker configuration.

Usage Notes

• An error is returned if you specify the name of the primary database in the broker configuration.

• By default, the command removed the corresponding broker settings of the LOG_ARCHIVE_DEST_n initialization parameter on the primary database and the LOG_ARCHIVE_CONFIG initialization parameter on all databases in the configuration. To preserve these settings, use the PRESERVE DESTINATIONS option.

• This command cannot be executed if fast-start failover is enabled and database-name specifies the name of the target standby database.

Command Example

Example 1   

The following example shows how to remove a database from the Data Guard broker configuration.

DGMGRL> SHOW CONFIGURATION;
 
Configuration - The SUPER cluster
 
  Protection Mode: MaxPerformance
  Databases:
    North_Sales  - Primary database
    South_Sales  - Physical standby database
 
Fast-Start Failover: DISABLED
 
Configuration status:
SUCCESS
 
DGMGRL> REMOVE DATABASE 'South_Sales';
Removed database "South_Sales" from the configuration.
 
 
Configuration - The SUPER cluster
 
  Protection Mode: MaxPerformance
  Databases:
    North_Sales  - Primary database
 
Fast-Start Failover: DISABLED
 
Configuration status:
SUCCESS

REMOVE INSTANCE

Removes an instance from an existing database profile in the broker configuration.

Format

REMOVE INSTANCE instance-name

[ON DATABASE database-name];

Command Parameters

instance-name

The name of the instance (SID) that you want to remove from the broker configuration.

database-name

The name of the database to which the instance-name is associated.

Usage Notes

• In an Oracle RAC database, the broker automatically adds started instances into the corresponding database profile. However, the broker may not automatically remove instances from the database profile. The REMOVE INSTANCE command can be used to manually remove any instance that no longer exists from the database profile.

• The instance-name can be unique across the configuration. If instance-name is not unique, you must specify both the database-name and the instance-name to fully identify the instance.

• This command is rejected for an instance that is currently active in the broker configuration.

• This command is rejected if this is the only instance currently associated with a database profile.

Command Example

Example 1   

The following example shows how to remove an instance of the database.

DGMGRL> REMOVE INSTANCE 'south_sales3' ON DATABASE 'South_Sales';
Removed instance "south_sales3" from the database "South_Sales"

SHOW CONFIGURATION

Displays a summary and status of the broker configuration. The summary lists all databases included in the broker configuration and other information pertaining to the broker configuration itself, including the fast-start failover status.

Format

SHOW CONFIGURATION [VERBOSE | property-name];

Command Parameters

property-name

The name of the property for which you want to display summary information.

See Chapter 8, "Data Guard Broker Properties" for complete information about properties.

Usage Notes

• Use the SHOW CONFIGURATION VERBOSE command (or the SHOW FAST_START FAILOVER command) to show the properties related to fast-start failover.

• You can optionally specify either VERBOSE or property-name, but not both.

Command Examples

Example 1   Showing a Summary of the DRSolution Configuration

The following example provides a summary of the DRSolution configuration for which fast-start failover is disabled.

DGMGRL> SHOW CONFIGURATION;
 
Configuration - The SUPER cluster
 
  Protection Mode: MaxPerformance
  Databases:
    North_Sales  - Primary database
    South_Sales  - Physical standby database
 
Fast-Start Failover: DISABLED
 
Configuration status:
SUCCESS

Example 2   Showing Detailed Description of the DRSolution Configuration

The following example provides detailed information about the DRSolution configuration, including configuration properties, and fast-start failover-related information:

DGMGRL> SHOW CONFIGURATION VERBOSE;
 
Configuration - DRSolution
 
  Protection Mode: MaxAvailability
  Databases:
    North_Sales  - Primary database
    South_Sales  - (*) Physical standby database
 
  (*) Fast-Start Failover target
 
  Properties:
    FastStartFailoverThreshold      = '60'
    OperationTimeout                = '30'
    FastStartFailoverLagLimit       = '30'
    CommunicationTimeout            = '180'
    FastStartFailoverAutoReinstate  = 'TRUE'
    FastStartFailoverPmyShutdown    = 'TRUE'
    BystandersFollowRoleChange      = 'ALL'
 
Fast-Start Failover: ENABLED
 
  Threshold:        180 seconds
  Target:           South_Sales
  Observer:         observer.example.com
  Lag Limit:        30 seconds (not in use)
  Shutdown Primary: TRUE
  Auto-reinstate:   TRUE
 
Configuration Status:
SUCCESS

SHOW DATABASE

Displays information or property values of the specified database and its instances.

Format

SHOW DATABASE [VERBOSE] database-name [property-name];

Command Parameters

database-name

The name of the database for which you want to display information. The VERBOSE keyword, if used, must come before the database-name or an error is returned.

property-name

The name of the property for which you want to display a value. If a property name is specified, the output shows only the specified property (not all properties of the database), regardless of whether or not the VERBOSE keyword is specified.

See Also:

Chapter 4 and Chapter 8 for information about properties.

Usage Notes

• The SHOW DATABASE command shows a brief summary of the database. SHOW DATABASE VERBOSE shows properties of the database in addition to the brief summary. They both show the status of the database.

• The SHOW DATABASE VERBOSE command shows database-specific properties and instance-specific properties. For a non-Oracle RAC database, the values of the instance-specific properties are those of the only instance of the database. For an Oracle RAC database, the values of the instance-specific properties will not be shown, although the property names are still listed. To see the instance-specific values of these properties, use the SHOW INSTANCE command.

• The properties that the SHOW DATABASE VERBOSE command shows depend on the database role and the configuration composition:

  • For the primary database, properties specific to physical or snapshot standby databases are shown only if there is at least one physical or snapshot standby database in the configuration. The properties specific to logical standby databases are shown only if there is at least one logical standby database in the configuration.

  • For physical and snapshot standby databases, properties specific to logical standby databases are not shown.

  • For logical standby databases, properties specific to physical and snapshot standby databases are not shown.

• This command is rejected if you use the SHOW DATABASE database-name property-name command to show an instance-specific property in an Oracle RAC database.

Command Examples

Example 1   

Shows database information in an abbreviated format.

DGMGRL> SHOW DATABASE 'South_Sales';
 
Database - South_Sales
 
  Role:            PHYSICAL STANDBY
  Intended State:  APPLY-ON
  Transport Lag:   0 seconds
  Apply Lag:       0 seconds
  Real Time Query: OFF
  Instance(s):
    south_sales1
 
Database Status:
SUCCESS

Example 2   

Shows database information in an extended format.

DGMGRL> SHOW DATABASE VERBOSE 'South_Sales';
 
Database - South_Sales
 
  Role:            PHYSICAL STANDBY
  Intended State:  OFFLINE
  Transport Lag:   0
  Apply Lag:       0
  Real Time Query: OFF
  Instance(s):
    south_sales1
 
  Properties:
    DGConnectIdentifier             = 'South_Sales.example.com'
    ObserverConnectIdentifier       = ''
    LogXptMode                      = 'SYNC'
    DelayMins                       = '0'
    Binding                         = 'optional'
    MaxFailure                      = '0'
    MaxConnections                  = '1'
    ReopenSecs                      = '300'
    NetTimeout                      = '30'
    RedoCompression                 = 'DISABLE'
    LogShipping                     = 'ON'
    PreferredApplyInstance          = ''
    ApplyInstanceTimeout            = '0'
    ApplyParallel                   = 'AUTO'
    StandbyFileManagement           = 'AUTO'
    ArchiveLagTarget                = '0'
    LogArchiveMaxProcesses          = '5'
    LogArchiveMinSucceedDest        = '1'
    DbFileNameConvert               = 'dbs/t, dbs/bt'
    LogFileNameConvert              = 'dbs/t, dbs/bt'
    FastStartFailoverTarget         = 'North_Sales'
    InconsistentProperties          = '(monitor)'
    InconsistentLogXptProps         = '(monitor)'
    SendQEntries                    = '(monitor)'
    LogXptStatus                    = '(monitor)'
    RecvQEntries                    = '(monitor)'
    SidName                         = 'south_sales1'
    StaticConnectIdentifier         = '(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)
(HOST=south_sales1.example.com)(PORT=2840))
(CONNECT_DATA=(SERVICE_NAME=South_Sales_DGMGRL.example.com)
(INSTANCE_NAME=south_sales1)(SERVER=DEDICATED)))'
    StandbyArchiveLocation          = 'USE_DB_RECOVERY_FILE_DEST'
    AlternateLocation               = ''
    LogArchiveTrace                 = '255'
    LogArchiveFormat                = 'db2r_%d_%t_%s_%R.arc'
    LatestLog                       = '(monitor)'
    TopWaitEvents                   = '(monitor)'
 
Database Status:
SUCCESS

SHOW FAST_START FAILOVER

Displays all fast-start failover related information.

Format

SHOW FAST_START FAILOVER;

COMMAND PARAMETERS

None.

Usage Notes

The SHOW FAST_START FAILOVER command shows a summary of the fast-start failover configuration.

Command Example

DGMGRL> SHOW FAST_START FAILOVER;
 
Fast-Start Failover: DISABLED
 Threshold:           30 seconds
 Target:              (none)
 Observer:            (none)
 Lag Limit:           30 seconds
 Shutdown Primary:    TRUE
 Auto-reinstate:      TRUE
 
Configurable Failover Conditions
 Health Conditions:
   Corrupted Controlfile          YES
   Corrupted Dictionary           YES
   Inaccessible Logfile            NO
   Stuck Archiver                  NO
   Datafile Offline               YES
 
 Oracle Error Conditions:
   ORA-27102: out of memory

SHOW INSTANCE

Displays information or property values for the specified instance.

Format

SHOW INSTANCE [VERBOSE] instance-name [property-name] [ON DATABASE database-name];

Command Parameters

instance-name

The name of the instance for which you want to display information. The VERBOSE keyword, if used, must come before the instance name.

property-name

The name of the property for which you want to display a value. If a property name is specified, the output shows only the specified property (not all properties), regardless of whether or not the VERBOSE keyword is specified.

See Also:

Chapter 4 and Chapter 8 for information about properties.

database-name

The name of the database to which is associated the instance for which you want to show information.

Usage Notes

• The SHOW INSTANCE command shows a brief summary of the instance. SHOW INSTANCE VERBOSE shows properties of the instance in addition to the brief summary. They both show the status of the instance.

• The SHOW INSTANCE VERBOSE command only shows instance-specific properties.

• The properties that the SHOW INSTANCE VERBOSE command shows depend on the database role and the configuration composition:

  • For instances of the primary database, properties specific to physical or snapshot standby instances are shown only if there is at least one physical or snapshot standby database in the configuration. The properties specific to logical standby instances are shown only if there is at least one logical standby database in the configuration.

  • For instances of physical or snapshot standby databases, properties specific to logical standby instances are not shown.

  • For instances of logical standby databases, properties specific to physical and snapshot standby instances are not shown.

• The instance-name can be unique across the configuration. If instance-name is not unique, you must specify both the database-name and the instance-name to fully identify the instance.

Command Example

Example 1   

The following example shows information about a specific instance of a database.

DGMGRL> SHOW INSTANCE 'north_sales1';
 
Instance 'north_sales1' of database 'North_Sales'
 
Instance Status:
SUCCESS

Example 2   

Shows instance information in an extended format.

DGMGRL> SHOW INSTANCE VERBOSE 'north_sales1';
 
Instance 'north_sales1' of database 'North_Sales'
 
  Host Name: north.example.com
  PFILE:
  Properties:
    SidName                         = 'north_sales1'
    StaticConnectIdentifier         = '(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)
(HOST=north.example.com)(PORT=2094))
(CONNECT_DATA=(SERVICE_NAME=North_Sales_DGMGRL.example.com)
(INSTANCE_NAME=north_sales1)(SERVER=DEDICATED)))'
    StandbyArchiveLocation          = 'USE_DB_RECOVERY_FILE_DEST'
    AlternateLocation               = ''
    LogArchiveTrace                 = '255'
    LogArchiveFormat                = 'r_%d_%t_%s_%R.arc'
    LatestLog                       = '(monitor)'
    TopWaitEvents                   = '(monitor)'
 
Instance Status:
SUCCESS

SHUTDOWN

Shuts down a currently running Oracle instance.

Format

SHUTDOWN [ ABORT | IMMEDIATE | NORMAL ];

Command Parameters

None.

Usage Notes

• Using the SHUTDOWN command with no arguments is equivalent to using the SHUTDOWN NORMAL command.

• The following list describes the options to the SHUTDOWN command:

  • ABORT

    Proceeds with the fastest possible shutdown of the database without waiting for calls to complete or for users to disconnect from the database. Uncommitted transactions are not rolled back. Client SQL statements being processed are terminated. All users connected to the database are implicitly disconnected, and the next database startup will require instance recovery. You must use this option if a background process terminates abnormally.

    Caution:

    If you use the ABORT option on the primary database when fast-start failover is enabled and the observer is running, a fast-start failover may ensue. Use the IMMEDIATE or NORMAL option to prevent an unexpected fast-start failover from occurring.

  • IMMEDIATE

    Does not wait for current calls to complete or users to disconnect from the database. Further connections are prohibited. The database is closed and dismounted. The instance is shut down, and no instance recovery is required on the next database startup.

  • NORMAL

    This is the default option. The process waits for users to disconnect from the database. Further connections are prohibited. The database is closed and dismounted. The instance is shut down, and no instance recovery is required on the next database startup.

Command Example

Example 1   

The following command shuts down the primary database in normal mode.

DGMGRL > SHUTDOWN;

Database closed. 
Database dismounted. 
Oracle instance shut down.

START OBSERVER

Starts the fast-start failover observer.

Format

START OBSERVER [ FILE=observer_configuration_filename ];

Command Parameters

observer_configuration_filename

Specifies an explicit directory path and file name on the observer computer.

Usage Notes

• The Oracle Client Administrator kit, or the full Oracle Database Enterprise Edition or Oracle Personal Edition kit must be installed on the observer computer to monitor a broker configuration for which fast-start failover is to be enabled. See Section 5.5.1 for more information.

• The START OBSERVER command must be issued on the observer computer. Once the observer is successfully started, control is not returned to the user until the observer is stopped (for example, by issuing the STOP OBSERVER command from a different client connection). If you want to perform further interaction with the broker configuration, you must connect through another client.

• The observer runs autonomously once it has been successfully started. For this reason, it is recommended that when invoking DGMGRL for the purpose of issuing the START OBSERVER command, specify the -logfile optional parameter on the command line so that output generated while acting as the observer is not lost. See Section 7.1.1 for more information about this parameter and see Section 9.5.3 for an example use of the -logfile option.

• If a directory path is not specified with the FILE parameter, the observer searches the current working directory for the fsfo.dat file. If an fsfo.dat file is not found and this is the first time the START OBSERVER command is issued, the observer creates a fsfo.dat file.

• The primary and target standby database DB_UNIQUE_NAME initialization parameter and connect identifiers are stored in the fsfo.dat configuration file. Oracle recommends you ensure this file is protected from unauthorized access.

• Fast-start failover does not need to be enabled before you issue this command.

  • If fast-start failover is enabled, the observer will retrieve primary and target standby connect identifiers from the broker configuration and begin monitoring the configuration.

  • If fast-start failover is not enabled, the observer continually monitors for when fast-start failover is enabled.

• Only the primary database needs to be running when you issue this command; the standby database that will be the target of a fast-start failover does not need to be running in order for this command to complete successfully.

• Use the SHOW FAST_START FAILOVER command, the SHOW CONFIGURATION VERBOSE command, or query the FS_FAILOVER_* columns in the V$DATABASE view on the primary database to see the status of the observer and its host computer.

• The SHOW FAST_START FAILOVER command indicates whether the broker configuration believes that an observer has already been started. If the command displays the following, then you can issue the START OBSERVER command on any computer to start the observer:

  Observer:       (none)
  

  If the SHOW FAST_START FAILOVER command shows a value for "Observer:", but the observer at that observer location is no longer running for some reason, you can do either of the following:

  • issue the START OBSERVER command on the same observer computer where it was started originally, with the observer configuration file used when the observer was first started

  • issue the STOP OBSERVER command and then the START OBSERVER command on any computer to start the observer

  If the SHOW FAST_START FAILOVER command shows a value for "Observer:" and the observer is already running at that location, an attempt to start an observer at that location again will fail with the following error:

  DGM-16954: Unable to open and lock the Observer configuration file
  

  If the SHOW FAST_START FAILOVER command shows a value for "Observer:" and you attempt to start an observer at a different location, the command will fail with the following error:

  ORA-16647: could not start more than one observer
  

• If the primary and target standby databases stay connected but they lose the connection to the observer, then the primary database goes into an unobserved state. This state is reported by the broker's health check capability.

Command Examples

Example 1   

The following example shows how to start the observer.

DGMGRL> CONNECT sys@North_Sales.example.com;
Password: password
Connected.
DGMGRL> START OBSERVER;
Observer started

Example 2   

The following example shows how to start the observer using CONNECT '/' so that connection credentials are not visible on the command line:

DGMGRL> CONNECT /@North_Sales.example.com;
DGMGRL> START OBSERVER;
Observer started.

You must set up Oracle Wallet or SSL to use CONNECT '/'. By setting up Oracle Wallet or SSL, you can write a script to securely start and run the observer as a background job without specifying database credentials in the script. When using Oracle Wallet as a secure external password store, be sure to add credentials for both the primary and fast-start failover target standby databases. The database connect string that you specify when adding the credentials for each database must match the ObserverConnectIdentifer or DGConnectIdentifier database property.

See Also:

Oracle Database Advanced Security Administrator's Guide for more information about Oracle Wallet

STARTUP

Starts an Oracle database instance with any of the following options:

• FORCE: shuts down the current Oracle instance in the SHUTDOWN ABORT mode before restarting it.

• RESTRICT: allows only Oracle users with the RESTRICTED SESSION system privilege to connect to the instance.

• PFILE: specifies the PFILE initialization parameter file to be used when the database instance is started.

• MOUNT: mounts the specified database without opening it.

• OPEN: mounts and opens the specified database.

• NOMOUNT: starts the specified database instance without mounting the database.

Format

STARTUP

[FORCE]

[RESTRICT]

[PFILE=filename]

[MOUNT | OPEN [open-options] | NOMOUNT];

Command Parameters

filename

The name of the initialization parameter file to be used when starting the database instance. If you do not specify the PFILE parameter option, then the default server parameter file (specific to your operating system) is used.

open-options

The mode of access in which you want the specified database to start. The possible modes are:

READ ONLY
READ WRITE

Usage Notes

• Using the STARTUP command with no arguments is equivalent to using the STARTUP OPEN command.

• If you do not use the FORCE clause when you use the STARTUP command and the current database instance is running, an error results. The FORCE clause is useful when you are debugging or when error conditions are occurring. Otherwise, it should not be used.

• Use the RESTRICT clause to allow only Oracle users with the RESTRICTED SESSION system privilege to connect to the instance. Later, you can use the ALTER SYSTEM command through SQL*Plus to disable the restricted session feature.

• If you do not use the PFILE clause to specify the initialization parameter file, the STARTUP command uses the default server parameter file, if it exists. Otherwise, the STARTUP command uses the default initialization parameter file. The default files are platform specific.

  See your operating system-specific documentation for more information about the default parameter files.

• Use the OPEN clause to mount and open the specified database.

• The NOMOUNT clause starts the database instance without mounting the database. You cannot use the NOMOUNT clause with the MOUNT or OPEN options.

Command Examples

Example 1   

The following examples show two different methods for starting a database instance. Each command starts a database instance using the standard parameter file, mounts the default database in exclusive mode, and opens the database.

DGMGRL> STARTUP;
DGMGRL> STARTUP OPEN;

Example 2   

The following command shuts down the current instance, immediately restarts it without mounting or opening the database, and allows only users with restricted session privileges to connect to it.

DGMGRL > STARTUP FORCE RESTRICT NOMOUNT;

Example 3   

The following command starts an instance using the parameter file testparm without mounting the database.

DGMGRL > STARTUP PFILE=testparm NOMOUNT;

Example 4   

The following example starts and mounts a database instance, but does not open it.

DGMGRL> STARTUP MOUNT;

STOP OBSERVER

Stops the fast-start failover observer.

Format

STOP OBSERVER;

Command Parameters

None.

Usage Notes

• You can issue this command while connected to any database in the broker configuration.

• This command does not disable fast-start failover, but a fast-start failover cannot be initiated in the absence of an observer.

• Fast-start failover does not need to be enabled when you issue this command.

• If fast-start failover is enabled when you issue the STOP OBSERVER command, then the primary and standby databases must be connected and communicating with each other. Otherwise the following error is returned:

  ORA-16636 fast-start failover target standby in error state, cannot stop observer
  

  If connectivity does not exist between the primary and standby databases, you can issue the DISABLE FAST_START FAILOVER FORCE command on the primary database and then issue the STOP OBSERVER command. Note that disabling fast-start failover with the FORCE option on a primary database that is disconnected from the observer and the target standby database does not prevent the observer from initiating a fast-start failover to the target standby database.

• If fast-start failover is not enabled when you issue the STOP OBSERVER command, then only the primary database must be running when you stop the observer.

• The observer does not stop immediately when the STOP OBSERVER command is issued. The observer does not discover it has been stopped until the next time the observer contacts the broker.

  As soon as you have issued the STOP OBSERVER command, you may enter the START OBSERVER command again on any computer. You can start a new observer right away, even if the old observer has not yet discovered it was stopped. Any attempt to restart the old observer will fail, because a new observer has been started for the broker configuration.

Command Examples

Example 1   

The following example stops the observer.

DGMGRL> STOP OBSERVER;

SWITCHOVER

A switchover operation is a planned transition in which the primary database exchanges roles with one of the standby databases. When you issue the SWITCHOVER command, the current primary database becomes a standby database, and the specified standby database becomes the primary database.

Format

SWITCHOVER TO database-name;

Command Parameter

database-name

The name of the standby database you want to change to the primary database role.

Usage Notes

• If fast-start failover is enabled, you may switch over only to the fast-start failover target standby database.

• The broker verifies that the primary and standby databases are in the following states before starting the switchover:

  • The primary database must be enabled and in the TRANSPORT-ON state so redo transport services are started.

  • The standby database must be enabled and in the APPLY-ON state, with log apply services started.

• The broker allows the switchover to proceed as long as there are no redo transport services errors for the standby database that you selected to participate in the switchover. However, errors occurring for any other bystander standby database will not prevent the switchover from proceeding.

• Switchover to a logical standby database is not allowed when the configuration is operating in maximum protection mode.

• If the broker configuration is operating in either maximum protection mode or maximum availability mode, the switchover maintains the protection mode even after the operation (described in Section 5.3.1). The switchover will not be allowed if the mode cannot be maintained because the target standby database of the switchover was the only standby that satisfied the protection mode requirement.

• If the standby database that is assuming the primary role is a physical standby database, then the old primary database will be restarted after the switchover completes. If the standby database is a logical standby database, then neither the primary database nor the logical standby database is restarted.

• If the standby database that is assuming the primary role is a physical standby database, then the original primary becomes a physical standby database.

• If the standby database that is assuming the primary role is a logical standby database, then the original primary becomes a logical standby database.

• If an Oracle RAC primary database is becoming a physical standby database, all but one instance of the primary database will be shut down before performing the switchover. See Section 5.3 for details.

• You cannot switchover to a snapshot standby database.

• If the standby database that is assuming the primary role is a logical standby database and there are physical standby databases in the configuration, after the switchover, the physical standby databases will be disabled.

  Caution:

  For this reason, Oracle generally recommends that you specify your physical standby database for switchover instead of your logical standby database. If you must switch over to your logical standby database, see Section 5.4.3 to re-create your physical standby database.

  If you intend to switch back to the original primary database relatively soon, you may allow the physical and snapshot standbys to remain disabled. Once you have completed the switchover back to the original primary, you may then reenable the physical and snapshot standby databases since they are still viable standbys for the original primary database.

Command Examples

Example 1   

The following example shows a successful switchover in which the physical standby database, South_Sales, transitions into the primary role.

DGMGRL> switchover to 'South_Sales';
Performing switchover NOW, please wait...
New primary database "South_Sales" is opening...
Operation requires shutdown of instance "north_sales1" on database "North_Sales"
Shutting down instance "north_sales1"...
ORA-01109: database not open
 
Database dismounted.
ORACLE instance shut down.
Operation requires startup of instance "north_sales1" on database "North_Sales"
Starting instance "north_sales1"...
ORACLE instance started.
Database mounted.
Switchover succeeded, new primary is "South_Sales"

Example 2   

If you connect to the database using operating system authentication, you can use any username and password to connect. However, DGMGRL may not be able to shut down and start up the primary and standby database automatically because it cannot remotely authenticate itself.

The following example shows a switchover that succeeded but returns an error because DGMGRL cannot shut down and start up the primary and standby databases.

DGMGRL> SWITCHOVER TO 'South_Sales';
Performing switchover NOW, please wait...
New primary database "South_Sales" is opening...
Operation requires shutdown of instance "north_sales1" on database "North_Sales"
Shutting down instance "north_sales1"...
ORA-01031: insufficient privileges
 
Warning: You are no longer connected to ORACLE.
 
Please complete the following steps to finish switchover:
        shut down instance "north_sales1" of database "North_Sales"
        start up and mount instance "north_sales1" of database "North_Sales"

You must manually issue the SHUTDOWN and STARTUP commands to restart the new primary and any standby instances that may have been shut down.