PK
—&–Aoa«, mimetypeapplication/epub+zipPK —&–A iTunesMetadata.plistd›û
This chapter describes configuring Enterprise User Security using a sequence of steps. They include the initial database and directory preparation through connecting to the database as an enterprise user, where authentication can use passwords, Kerberos tickets, or SSL. A troubleshooting section helps you when you test your Enterprise User Security implementation.
This chapter contains the following topics:
Preparing the Directory for Enterprise User Security (Phase One)
Configuring Enterprise User Security Objects in the Database and the Directory (Phase Two)
Configure Enterprise User Security for the Authentication Method You Require (Phase Three)
Configuring Enterprise User Security means creating shared schemas and global roles in databases that you want accessible to enterprise users. You configure the identity management realm in the directory to reflect those database roles and schemas, and then associate directory users with them. These steps apply regardless of the authentication method you choose: password, Kerberos, or SSL.
The primary configuration differences among the authentication types are in network connection configuration. You must consider the following three connection types:
Client-to-database
Database-to-directory
Database-to-database (current user database links can be secured by SSL only)
Enterprise User Security supports many combinations of authentication types between databases, directories, and clients. The three most common implementations of Enterprise User Security, described in this chapter, use the following authentication methods for client-database and database-directory connections:
Passwords for both connections
SSL for both connections
Kerberos for client-database connections and passwords for database-directory connections
You decide which of these to choose based primarily on your network environment, because the security and integrity of your enterprise data depend on creating secure network connections. Typical network environments can have all clients, databases, and directories residing within the same network behind a firewall, or distributed across several networks and perhaps exposed to the Internet. Different environments can dictate what authentication types you choose, in order to secure your Enterprise User Security network connections.
A second consideration in making such choices is the fact that more rigorous authentication types, such as SSL and Kerberos, require greater configuration complexity, additional software, and ongoing maintenance.
Figure 4-1 shows the configuration process for Enterprise User Security. It is a step-by-step process with decision points based on your implementation and how your users are authenticated. The configuration steps represented with broken lines are optional.
Figure 4-1 Enterprise User Security Configuration Flow Chart

For brevity, some product names and features have been abbreviated in this flow chart. The following table lists the abbreviations used and the meaning of each:
| Abbreviation | Meaning |
|---|---|
| DBCA | Database Configuration Assistant |
| EM | Oracle Enterprise Manager Database Control or Grid Control |
| IM Realm | Identity Management Realm |
| Netmgr | Oracle Net Manager |
| ODM | Oracle Directory Manager |
| OID | Oracle Internet Directory |
| OID DAS | Oracle Internet Directory Delegated Administration Services |
| OWM | Oracle Wallet Manager |
| SQL | SQL*Plus |
|
See Also: Chapter 1, "Introducing Enterprise User Security" for information about the realm Oracle Context, its administrative groups, and entries that pertain to Enterprise User Security |
This section provides detailed descriptions of the configuration steps that Figure 4-1 illustrates. They should be performed in the following order:
"Preparing the Directory for Enterprise User Security (Phase One)"
"Configuring Enterprise User Security Objects in the Database and the Directory (Phase Two)"
"Configure Enterprise User Security for the Authentication Method You Require (Phase Three)", which completes your Enterprise User Security configuration by establishing your chosen authentication method as one of the following three:
This configuration phase must be performed before you can configure any other part of Enterprise User Security.
Enterprise User Security for 11g Release 2 (11.2) requires Release 9.0.4 (or later) version of Oracle Internet Directory, which installs with the required version of the Oracle schema. This schema is backward compatible. After you have installed Oracle Internet Directory, perform the following directory usage configuration tasks:
Task 1: (Optional) Create an identity management realm in the directory
Task 5: (Optional) Configure your Oracle home for directory usage
Task 1: (Optional) Create an identity management realm in the directory
If necessary, use Oracle Internet Directory Self-Service Console (Delegated Administration Service) to create an identity management realm in the directory. You can use Oracle Internet Directory Configuration Assistant to upgrade an Oracle9i Oracle Context to a 9.0.4 or higher version Identity Management Realm.
You must have version 9.0.4 (or later) identity management realm to use Oracle Database 10g or Oracle Database 11g. Version 9.0.4 realms are backward compatible to Oracle9i, so you can register Oracle9i and Oracle Database 11g Release 2 (11.2) in the same realm and place them in the same domain, if desired.
|
See Also: Oracle Identity Management Guide to Delegated Administration for more information on creating identity management realms in Oracle Internet Directory |
Task 2: (Optional) Set identity management realm properties
Table 4-1 shows the defaults for a version 9.0.4 identity management realm.
Table 4-1 Identity Realm Defaults
| User Search Base | Group Search Base | Login Name Attribute (nickname) |
|---|---|---|
|
|
|
|
If you want different settings, then use Oracle Internet Directory Self-Service Console to set the user search base, group search base, and login name attribute (nickname). You can also set up the necessary context administrators in the identity management realm you plan to use in the directory.
To perform this task, see "Setting Properties of an Identity Management Realm".
|
Note: Each identity management realm includes an orcladmin user who is the root user of that realm only. These realm-specific orcladmin users are represented by the directory entriescn=orcladmin,cn=Users,<realm_DN>. Note that when you are logged in to Enterprise User Security administration tools as a realm-specific orcladmin user, then you can only manage directory objects for that realm. To manage objects in another realm, you must log in to administration tools as the orcladmin user for that realm. |
Task 3: Identify administrative users in the directory
Identify administrative users in the directory who are authorized to perform the following tasks:
Register databases
Administer database security
Create and manage enterprise domains
If administrative users do not already exist who can perform these tasks, then see Chapter 5, "Administering Enterprise User Security" to create them.
|
Note: Although one administrator can perform all Enterprise User Security administrative tasks, you can create many different kinds of administrators so security tasks can be assigned to different people. Separating security tasks in this way results in a more secure enterprise environment, but this requires coordination among the different administrators. |
Task 4: (Optional) Set the default database-to-directory authentication type for the identity management realm
By default, the database-to-directory authentication type for the identity management realm is set to passwords. If you want a different default setting, then use the Oracle Enterprise Manager Database Control or Grid Control interface to change it. For example, if you are using a public key infrastructure (PKI), then you would need to set the authentication type to SSL. See "Setting the Default Database-to-Directory Authentication Type for an Identity Management Realm".
|
Note:
|
Task 5: (Optional) Configure your Oracle home for directory usage
This step is optional because users of Domain Name System (DNS) discovery (automatic domain name lookup to locate the directory on a network) do not need to perform this step. (See Oracle Internet Directory Administrator's Guide for information about DNS server discovery.)
If you are not using DNS discovery, then you must use Oracle Net Configuration Assistant (NetCA) to create an ldap.ora file for your Oracle home. This configuration file specifies the directory host and port information, and the location of the identity management realm so the database can connect to the directory. (See "Starting Oracle Net Configuration Assistant")
To create an ldap.ora file for your Oracle home:
In the Oracle Net Configuration Assistant welcome page, choose Directory Service Usage Configuration, and click Next.
On the Directory Usage Configuration page, select an option appropriate for your environment. Then follow the prompts in the wizard and refer to the online Help to create an ldap.ora file for your Oracle home.
|
Note:
|
|
See Also: "Configuring Your Database to Use the Directory" for an example of using NetCA to configure directory usage |
Task 6: Register the database in the directory
After you have configured your Oracle home for directory usage, use Database Configuration Assistant to register the database in the directory. Registration creates an entry in the directory so the database can bind (log in) to it.
|
Note: To perform this task, you must be the directory superuser or a member of either theOracleDBCreators group or the OracleContextAdmins group. |
When registering a database in the directory, Database Configuration Assistant performs the following configuration tasks:
Creates a new database service entry and subtree, and assigns a DN to it in the Oracle Context for the identity management realm you are using.
Adds the database to the default enterprise domain.
Establishes the authentication type of the database to the directory by setting the LDAP_DIRECTORY_ACCESS parameter to one of the three allowable settings: NONE, PASSWORD, or SSL. Database Configuration Assistant reads the default database to directory authentication attribute setting for the identity management realm to determine the authentication type setting for the database.
The LDAP_DIRECTORY_ACCESS parameter, residing in the database initialization parameter file, determines whether and how the database attempts authentication to the directory. An administrator can change this authentication type setting by using the ALTER SYSTEM command.
Creates a database wallet, containing the database DN in the following form:
cn=short_database_name,cn=OracleContext,realm_DN
where short_database_name is the first part of the fully qualified domain name for a database.
For example, if you have a database named db1.us.example.com, then the short database name is db1.
Randomly generates a database password for directory access, storing it in the database wallet and in the directory.
After creating the wallet, Database Configuration Assistant stores it at $ORACLE_BASE/admin/Oracle_SID/wallet (in UNIX environments), if the ORACLE_BASE environment variable is present. If the ORACLE_BASE environment variable is not present, then the $ORACLE_HOME/admin/Oracle_SID/wallet directory is used.
In Windows environments, replace the slashes (/) with backslashes (\).
If a database wallet already exists, then Database Configuration Assistant uses it and updates the password in the wallet.
Enables autologin for the database wallet.
|
Note: The database's password-based credentials for authentication to Oracle Internet Directory are placed in the wallet when an Oracle database is registered in Oracle Internet Directory. |
To register a database with the directory:
See "Starting Database Configuration Assistant" to start this tool.
After starting Database Configuration Assistant, select Configure Database Options in a Database and click Next.
Select a database and click Next.
To register the database, click Yes, Register the Database.
Enter the directory credentials for a user in the OracleDBCreators group.
Enter a password for the database wallet.
|
Note: Remember the database wallet password you entered in Step 5. It cannot be retrieved after you finish database registration. If you do not know the password, a multistep process is required to generate a new wallet and reregister the database. See "About the Database Wallet and Password" for further information. |
Click Finish if you are only registering the database. Click Next if you want to configure additional database features.
|
See Also: "Registering Your Database with the Directory" for an example of using DBCA to register the database |
To change the database's directory password:
After starting Database Configuration Assistant, select Configure Database Options in a Database, and click Next.
Select a database and click Next.
Select Regenerate database password.
Enter the directory credentials for a user in the OracleDBCreators group and a password for the database wallet. Click OK.
Click Finish if you are only regenerating the password. Click Next if you want to configure additional database features.
To unregister a database from the directory:
See "Starting Database Configuration Assistant" to start this tool.
After starting Database Configuration Assistant, select Configure Database Options in a Database and click Next.
Select a database and click Next.
To unregister the database, select the Unregister option.
Enter the directory credentials for a user with the appropriate permissions.
Enter a password for the database wallet.
When you unregister a database from the directory, Database Configuration Assistant performs the following configuration tasks:
Removes the database entry and subtree from the directory.
Sets the LDAP_DIRECTORY_ACCESS parameter to NONE.
Removes the database from its enterprise domain (if the user has sufficient permissions).
|
Note: Depending on user permissions, Database Configuration Assistant may be unable to remove a database from its domain in the directory. If it cannot, then use Oracle Enterprise Manager Database Control or Grid Control to remove it from the enterprise domain. |
Does not remove the database wallet.
|
See Also: "Navigating the Oracle Wallet Manager User Interface" and "Managing Wallets" in the Oracle Database Advanced Security Administrator's Guide for more information about deleting the wallet |
|
Note: To succeed at unregistering an Oracle Database from Oracle Internet Directory by using Database Configuration Assistant, you must be one of the following:
|
The database requires the wallet even if no SSL (Secure Sockets Layer) is used to secure the connection between the database and the directory. If SSL is used, then this wallet should be used to store the database's digital PKI certificate.
The €ÿ wallet password you enter when using Database Configuration Assistant to register a database in the directory is the password to the wallet itself. This password is not the database's directory login credentials.
You can change this wallet password later, using Oracle Wallet Manager. However, if you forget this wallet password, then you must generate an entirely new wallet and password. To do so, you must first delete the existing database wallet, create a new wallet (which can be empty) and put it at the default wallet location, $ORACLE_HOME/admin/Oracle_SID/wallet (in UNIX environment). Next, unregister the database from the directory, and reregister the database in the directory. During that registration, another database wallet and password can be generated.
|
See Also: "Using Oracle Wallet Manager" in the Oracle Database Advanced Security Administrator's Guide for information about using Oracle Wallet Manager to change wallet passwords and, in general, to manage public key infrastructure (PKI) credentials |
After you have prepared the directory for Enterprise User Security, then you can create the Enterprise User Security database and directory objects as described in "Configuring Enterprise User Security Objects in the Database and the Directory (Phase Two)".
|
See Also:
|
Multiple databases (that are not replicas) cannot share wallets, because wallets contain a database's identity. Therefore, if a sqlnet.ora file contains a wallet location, then multiple databases cannot share that sqlnet.ora file.
In order to share a single sqlnet.ora file among multiple databases, the following preconditions are required:
User authentication should use passwords or Kerberos.
The wallet containing the password should reside at the default wallet location, which is where Database Configuration Assistant creates it.
If the preceding conditions are met, then multiple databases can share the sqlnet.ora file because no wallet location information is stored in that file.
However, when SSL authentication is used between the user (client) and the database, the wallet location must be specified in the database server's sqlnet.ora file. Such a sqlnet.ora file cannot be shared by multiple databases for SSL-authenticated enterprise users.
This is the second phase of configuration steps required to implement Enterprise User Security. The configuration steps in this section assume the following recommended setup:
You have prepared your database and your directory by completing the tasks described in "Preparing the Directory for Enterprise User Security (Phase One)".
Your users are stored in an identity management realm Users subtree.
You use the OracleDefaultDomain, which is the default enterprise domain that Database Configuration Assistant uses when you register databases in the directory.
Note that databases must be in an enterprise domain that is in an identity management realm in order for enterprise user logins to work.
|
See Also: If you do not use the OracleDefaultDomain or store your users in an identity management realm Users subtree, then see the following documentation:
|
To configure Enterprise User Security objects in the database and directory perform the following tasks:
Task 1: Create Global Schemas and Global Roles in the Database
Task 2: Configure User-Schema Mappings for the Enterprise Domain
Task 5: Grant Enterprise Roles to Enterprise Users for Database Access
Task 1: Create Global Schemas and Global Roles in the Database
Although this step can also be completed by using Oracle Enterprise Manager, the following examples use SQL*Plus directly:
Create a shared schema for enterprise users. The following syntax example creates a shared schema named guest:
SQL> CREATE USER guest IDENTIFIED GLOBALLY AS '';
If you do not want to use a shared schema, then specify a user DN between the single quotation marks to create an exclusive schema.
Grant the CREATE SESSION privilege to the shared schema created in Step 1 so users can connect to it. The following syntax example grants the CREATE SESSION privilege to the guest shared schema:
SQL> GRANT CREATE SESSION TO guest;
Alternatively, you can grant the CREATE SESSION privilege to a global role, which you grant to specific users through an enterprise role. See Step 3.
Create global roles for the database to hold relevant privileges. The following syntax examples create the emprole and custrole global roles:
SQL> CREATE ROLE emprole IDENTIFIED GLOBALLY; SQL> CREATE ROLE custrole IDENTIFIED GLOBALLY;
Global roles are associated with enterprise roles, which are created later, and then are allocated to enterprise users.
Grant privileges to the new global roles that were created in Step 3. The following syntax example grants the SELECT privilege to emprole and custrole global roles on the products table:
SQL> GRANT select ON products TO custrole, emprole;
|
See Also: Oracle Database SQL Language Reference for information about the syntax used for these steps |
Task 2: Configure User-Schema Mappings for the Enterprise Domain
Use Enterprise Manager to configure user-schema mappings for the OracleDefaultDomain by using the following steps:
Log in to Enterprise Manager.
Click the Server tab. Under the Security section, click Enterprise User Security.
The Oracle Internet Directory Login page appears.
Enter the distinguished name (DN) of a directory user who can administer enterprise users in the User field. Enter the user password in the Password field. Click Login.
The Enterprise User Security page appears.
Click Manage Enterprise Domains.
The Manage Enterprise Domains page appears. This page lists the enterprise domains in the identity management realm.
Select OracleDefaultDomain. Click Configure.
The Configure Domain page appears.
Click the User-Schema Mappings tab. All user-schema maps created at the domain level are displayed. User-schema maps created at database levels are not displayed here.
Click Create to create a new user-schema mapping for the domain.
The Create Mapping page is displayed.
Under the From section, select Users to map an individual enterprise user to a database schema. Alternatively, select Subtree to map a directory subtree containing multiple users. You can use the Search icon to search for the appropriate user or subtree.
Under the To section, enter the name of the Schema to which the user or subtree should be mapped. This is the schema that you created in Task 1.
Click Continue in the Create Mapping page.
Click OK in the Configure Domain page.
|
Note: You can also create user-schema mappings for an individual database in an enterprise domain. Such mappings apply only to that particular database and not to other databases in the domain. |
|
See Also: "Mapping Enterprise Users to the Shared Schema" for an example on creating user-schema mappings |
Task 3: Create Enterprise Roles in the Enterprise Domain
Use Enterprise Manager to create enterprise roles in the OracleDefaultDomain by using the following steps:
Select OracleDefaultDomain in the Manage Enterprise Domains page. Click Configure.
The Configure Domain page appears.
Click the Enterprise Roles tab.
Click Create to create a new enterprise role.
The Create Enterprise Role page appears.
Enter a name for the enterprise role in the Name field. Click Continue.
The new role is displayed in the Configure Domain page.
Task 4: Add Global Database Roles to Enterprise Roles
Use Enterprise Manager to add the global database roles that you created in Task 1 to the enterprise roles that you created in Task 3 by using the following steps:
Select the enterprise role that you just created in the Configure Domain page. Click Edit.
The Edit Enterprise Role page is displayed.
Make sure that the DB Global Roles tab is selected. Click Add to add global roles from databases that are part of the enterprise domain.
The Search and Select Database Global Roles page appears.
Select the Database that contains the global roles you wish to add. Log in to the selected database by supplying a User Name and Password. Click Go.
Select the global roles to add. Click Select.
The selected roles appear in the Edit Enterprise Role page.
Task 5: Grant Enterprise Roles to Enterprise Users for Database Access
Use Enterprise Manager to grant enterprise roles that you created in Task 3 to the enterprise users by using the following steps:
Click the Grantees tab in the Edit Enterprise Role page.
Click Add.
The Select Users or Groups page is displayed.
Select the Search Base or the subtree that contains the user or group. Select User under View if you are granting the enterprise role to a user. Select Group under View, if you are granting the role to a group. Optionally, enter the common name of the user or group in the Name field. Click Go.
Select the users or groups to be granted the enterprise role. Click Select.
Click Continue in the Edit Enterprise Role page.
Click OK in the Configure Domain page.
In the third phase, you complete the Enterprise User Security configuration based on the authentication method you have chosen. Go to one of the following sections:
"Configuring Enterprise User Security for Password Authentication"
"Configuring Enterprise User Security for Kerberos Authentication"
"Configuring Enterprise User Security for SSL Authentication"
|
See Also: Table 1-1, "Enterprise User Security Authentication: Selection Criteria" for a comparison of the benefits provided by password, Kerberos, and SSL authentication for Enterprise User Security |
By default, new enterprise domains are configured to accept all supported user authentication types (password, Kerberos, and SSL). If you want enterprise users to be authenticated by passwords, then you must configure that as described in the following tasks.
The configuration steps in this section assume the following:
You have prepared your directory by completing the tasks described in "Preparing the Directory for Enterprise User Security (Phase One)".
You have configured your Enterprise User Security objects in the database and the directory by completing the tasks described in "Configuring Enterprise User Security Objects in the Database and the Directory (Phase Two)".
You have configured an SSL instance with no authentication for Oracle Internet Directory as described in Oracle Internet Directory Administrator's Guide. If you are using an ldap.ora file, then also ensure that the port number for this SSL with no authentication instance is listed there as your directory SSL port.
To configure Enterprise User Security for password authentication, perform the following tasks:
Task 1: (Optional) Enable the Enterprise Domain to Accept Password Authentication
By default, OracleDefaultDomain is configured to accept password authentication. If this has been changed, then use Oracle Enterprise Manager Database Control or Grid Control to enable password authentication for OracleDefaultDomain using the following steps:
Log in to Enterprise Manager.
Click the Server tab for the database. Under the Security section, click Enterprise User Security.
The Oracle Internet Directory Login page appears.
Enter the distinguished name (DN) of a directory user who can administer enterprise users in the User field. Enter the user password in the Password field. Click Login.
The Enterprise User Security page appears.
Click Manage Enterprise Domains.
The Manage Enterprise Domains page appears. This page lists the enterprise domains in the identity management realm.
Select OracleDefaultDomain. Click Configure.
The Configure Domain page appears.
Click the Configuration tab.
Under User Authentication Types Accepted, select Password.
Click OK.
Task 2: Connect as a Password-Authenticated Enterprise User
For an enterprise user whose directory login name is hscortea and whose password is Easy2rem, enter the following to connect to the database by using SQL*Plus:
SQL> connect hscortea@<Oracle Net Service Name>
Enter password:
/* Enter Easy2rem when prompted for the password*/
The database authenticates the enterprise user (hscortea) by verifying the username-password combination against the directory entry associated with this user. Then, it identifies the proper schema and retrieves the user's global roles. If successful, then the connection to the database is established.
If your connection succeeds, then the system responds Connected to:.... This is the confirmation message of a successful connect and setup. If an error message is displayed, then see "ORA-# Errors for Password-Authenticated Enterprise Users".
If you do connect successfully, then check that the appropriate global roles were retrieved from the directory, by entering the following at the SQL*Plus prompt:
select * from session_roles
If the global roles were not retrieved from the directory, then see "NO-GLOBAL-ROLES Checklist".
You have completed password-authenticated Enterprise User Security configuration.
|
See Also:
|
The configuration steps in this section assume the following:
You have registered your databases with the Kerberos authentication server and configured your Oracle Net Services as described under "Configuring Kerberos Authentication" in the Oracle Database Advanced Security Administrator's Guide.
You have prepared your directory by completing the tasks described in "Preparing the Directory for Enterprise User Security (Phase One)".
You have configured your Enterprise User Security objects in the database and the directory by completing the tasks described in "Configuring Enterprise User Security Objects in the Database and the Directory (Phase Two)".
You have configured an SSL instance with no authentication for Oracle Internet Directory as described in Oracle Internet Directory Administrator's Guide. If you are using an ldap.ora, then also ensure that the port number for this SSL with no authentication instance is listed there as your directory SSL port.
To configure Enterprise User Security for Kerberos authentication, perform the following tasks:
Task 3: Specify the Enterprise User's Kerberos Principal Name in the krbPrincipalName Attribute
Task 4: (Optional) Enable the Enterprise Domain to Accept Kerberos Authentication
Task 1: Configure Oracle Internet Directory Self-Service Console to display the Kerberos principal name attribute
By default, the Oracle Internet Directory Self-Service Console user interface does not display the field where you can configure Kerberos principal names. The first time you create Kerberos-authenticated users in the directory, you must configure this tool to display the krbPrincipalName attribute in its Create User page by using the following steps:
Log in to the Oracle Internet Directory Self-Service Console.
Enter the URL to access the Oracle Internet Directory Self-Service Console in a browser window. For example:
http://myhost1:7777/oiddas
Log in as the orcladmin user.
Click the Configuration tab. Click the User Entry subtab.
Click Next until the Configure User Attributes page appears.
In the Configure User Attributes page, click Add New Attribute.
The Add New Attribute page appears.
In the Add New Attribute page, select krbPrincipalName from the Directory Attribute Name box (or the attribute that you have configured for orclCommonKrbPrincipalAttribute in your identity management realm) and perform the following steps on this page:
Enter a value, say Kerberos Principal Name, for the UI Label.
Select Searchable and Viewable.
Select Single Line Text from the UI Type.
ClickDone.
Click Next to navigate to the Configure Attribute Categories page. Select Basic Information and click Edit.
The Edit Category page appears.
Perform the following steps on the Edit Category page:
Select krbPrincipalName in the left category list.
Click Move, to move krbPrincipalName to the right-hand list.
Click Done.
Click Next until you reach the last step. Click Finish to save your work.
Task 2: (Optional) Configure the Kerberos Principal Name Directory Attribute for the Identity Management Realm
Use Oracle Internet Directory Self-Service Console to enter the directory attribute used to store the Kerberos principal name for the identity management realm you are using in the directory. By default, Kerberos principal names are stored in the krbPrincipalName attribute but can be changed to correspond to your directory configuration by changing orclCommonKrbPrincipalAttribute in the identity management realm. For more information about this task, see "Setting Login Name, Kerberos Principal Name, User Search Base, and Group Search Base Identity Management Realm Attributes".
|
Note: By default, the Oracle Internet Directory Self-Service Console user interface does not display the field where you can configure Kerberos principal names. The first time you create Kerberos-authenticated users in the directory, you must configure the console to display thekrbPrincipalName attribute in its Create User window. |
Task 3: Specify the Enterprise User's Kerberos Principal Name in the krbPrincipalName Attribute
Use Oracle Internet Directory Self-Service Console to specify the enterprise user's Kerberos principal name (Kerberos_username@Kerberos_realm) in the krbPrincipalName attribute of the enterprise user's directory entry. For more information about this task, see "Creating New Enterprise Users".
Task 4: (Optional) Enable the Enterprise Domain to Accept Kerberos Authentication
By default, OracleDefaultDomain is configured to accept all types of authentication. If this has been changed or if you are using another domain, then use Oracle Enterprise Manager Database Control or Grid Control to enable Kerberos authentication for your enterprise domain by performing the following steps:
Log in to Enterprise Manager.
Click the Server tab for the database. Under the Security section, click Enterprise User Security.
The Oracle Internet Directory Login page appears.
Enter the distinguished name (DN) of a directory user who can administer enterprise users in the User field. Enter the user password in the Password field. Click Login.
The Enterprise User Security page appears.
Click Manage Enterprise Domains.
The Manage Enterprise Domains page appears. This page lists the enterprise domains in the identity management realm.
Select OracleDefaultDomain. Click Configure.
The Configure Domain page appears.