| Oracle® Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux Part Number E22489-08 |
|
|
PDF · Mobi · ePub |
| Oracle® Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux Part Number E22489-08 |
|
|
PDF · Mobi · ePub |
This appendix provides instructions for how to complete configuration tasks manually that Cluster Verification Utility (CVU) and the installer (OUI) normally complete during installation. Use this appendix as a guide if you cannot use the fixup script.
This appendix contains the following information:
Passwordless SSH configuration is a mandatory installation requirement. SSH is used during installation to configure cluster member nodes, and SSH is used after installation by configuration assistants, Oracle Enterprise Manager, Opatch, and other features.
Automatic Passwordless SSH configuration using OUI creates RSA encryption keys on all nodes of the cluster. If you have system restrictions that require you to set up SSH manually, such as using DSA keys, then use this procedure as a guide to set up passwordless SSH.
In the examples that follow, the Oracle software owner listed is the grid user.
If SSH is not available, then OUI attempts to use rsh and rcp instead. However, these services are disabled by default on most Linux systems.
This section contains the following:
To determine if SSH is running, enter the following command:
$ pgrep sshd
If SSH is running, then the response to this command is one or more process ID numbers. In the home directory of the installation software owner (grid, oracle), use the command ls -al to ensure that the .ssh directory is owned and writable only by the user.
You need either an RSA or a DSA key for the SSH protocol. RSA is used with the SSH 1.5 protocol, while DSA is the default for the SSH 2.0 protocol. With OpenSSH, you can use either RSA or DSA. The instructions that follow are for SSH1. If you have an SSH2 installation, and you cannot use SSH1, then refer to your SSH distribution documentation to configure SSH1 compatibility or to configure SSH2 with DSA.
To configure SSH, you must first create RSA or DSA keys on each cluster node, and then copy all the keys generated on all cluster node members into an authorized keys file that is identical on each node. Note that the SSH files must be readable only by root and by the software installation user (oracle, grid), as SSH ignores a private key file if it is accessible by others. In the examples that follow, the DSA key is used.
You must configure SSH separately for each Oracle software installation owner that you intend to use for installation.
To configure SSH, complete the following:
Complete the following steps on each node:
Log in as the software owner (in this example, the grid user).
To ensure that you are logged in as grid, and to verify that the user ID matches the expected user ID you have assigned to the grid user, enter the commands id and id grid. Ensure that Oracle user group and user and the user terminal window process you are using have group and user IDs are identical. For example:
$ id uid=502(grid) gid=501(oinstall) groups=501(oinstall),502(grid,asmadmin,asmdba) $ id grid uid=502(grid) gid=501(oinstall) groups=501(oinstall),502(grid,asmadmin,asmdba)
If necessary, create the .ssh directory in the grid user's home directory, and set permissions on it to ensure that only the oracle user has read and write permissions:
$ mkdir ~/.ssh $ chmod 700 ~/.ssh
Enter the following command:
$ /usr/bin/ssh-keygen -t dsa
At the prompts, accept the default location for the key file (press Enter).
Note:
SSH with passphrase is not supported for Oracle Clusterware 11g release 2 and later releases.This command writes the DSA public key to the ~/.ssh/id_dsa.pub file and the private key to the ~/.ssh/id_dsa file.
Never distribute the private key to anyone not authorized to perform Oracle software installations.
Repeat steps 1 through 4 on each node that you intend to make a member of the cluster, using the DSA key.
Complete the following steps:
On the local node, change directories to the .ssh directory in the Oracle Grid Infrastructure owner's home directory (typically, either grid or oracle).
Then, add the DSA key to the authorized_keys file using the following commands:
$ cat id_dsa.pub >> authorized_keys $ ls
In the ssh directory, you should see the id_dsa.pub keys that you have created, and the file authorized_keys.
On the local node, use SCP (Secure Copy) or SFTP (Secure FTP) to copy the authorized_keys file to the oracle user .ssh directory on a remote node. The following example is with SCP, on a node called node2, with the Oracle Grid Infrastructure owner grid, where the grid user path is /home/grid:
[grid@node1 .ssh]$ scp authorized_keys node2:/home/grid/.ssh/
You are prompted to accept a DSA key. Enter Yes, and you see that the node you are copying to is added to the known_hosts file.
When prompted, provide the password for the grid user, which should be the same on all nodes in the cluster. The authorized_keys file is copied to the remote node.
Your output should be similar to the following, where xxx represents parts of a valid IP address:
[grid@node1 .ssh]$ scp authorized_keys node2:/home/grid/.ssh/ The authenticity of host 'node2 (xxx.xxx.173.152) can't be established. DSA key fingerprint is 7e:60:60:ae:40:40:d1:a6:f7:4e:zz:me:a7:48:ae:f6:7e. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'node1,xxx.xxx.173.152' (dsa) to the list of known hosts grid@node2's password: authorized_keys 100% 828 7.5MB/s 00:00
Using SSH, log in to the node where you copied the authorized_keys file. Then change to the .ssh directory, and using the cat command, add the DSA keys for the second node to the authorized_keys file, clicking Enter when you are prompted for a password, so that passwordless SSH is set up:
[grid@node1 .ssh]$ ssh node2 [grid@node2 grid]$ cd .ssh [grid@node2 ssh]$ cat id_dsa.pub >> authorized_keys
Repeat steps 2 and 3 from each node to each other member node in the cluster.
When you have added keys from each cluster node member to the authorized_keys file on the last node you want to have as a cluster node member, then use scp to copy the authorized_keys file with the keys from all nodes back to each cluster node member, overwriting the existing version on the other nodes.
To confirm that you have all nodes in the authorized_keys file, enter the command more authorized_keys, and determine if there is a DSA key for each member node. The file lists the type of key (ssh-dsa), followed by the key, and then followed by the user and server. For example:
ssh-dsa AAAABBBB . . . = grid@node1
Note:
The
grid user's /.ssh/authorized_keys file on every node must contain the contents from all of the /.ssh/id_dsa.pub files that you generated on all cluster nodes.After you have copied the authorized_keys file that contains all keys to each node in the cluster, complete the following procedure, in the order listed. In this example, the Oracle Grid Infrastructure software owner is named grid:
On the system where you want to run OUI, log in as the grid user.
Use the following command syntax, where hostname1, hostname2, and so on, are the public host names (alias and fully qualified domain name) of nodes in the cluster to run SSH from the local node to each node, including from the local node to itself, and from each node to each other node:
[grid@nodename]$ ssh hostname1 date [grid@nodename]$ ssh hostname2 date . . .
For example:
[grid@node1 grid]$ ssh node1 date The authenticity of host 'node1 (xxx.xxx.100.101)' can't be established. DSA key fingerprint is 7z:60:60:zz:48:48:z1:a0:f7:4e. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'node1,xxx.xxx.100.101' (DSA) to the list of known hosts. Mon Dec 4 11:08:13 PST 2006 [grid@node1 grid]$ ssh node1.example.com date The authenticity of host 'node1.example.com (xxx.xxx.100.101)' can't be established. DSA key fingerprint is 7z:60:60:zz:48:48:z1:a0:f7:4e. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'node1.example.com,xxx.xxx.100.101' (DSA) to the list of known hosts. Mon Dec 4 11:08:13 PST 2006 [grid@node1 grid]$ ssh node2 date Mon Dec 4 11:08:35 PST 2006 . . .
At the end of this process, the public host name for each member node should be registered in the known_hosts file for all other cluster nodes.
If you are using a remote client to connect to the local node, and you see a message similar to "Warning: No xauth data; using fake authentication data for X11 forwarding," then this means that your authorized keys file is configured correctly, but your SSH configuration has X11 forwarding enabled. To correct this issue, proceed to "Setting Display and X11 Forwarding Configuration".
Repeat step 2 on each cluster node member.
If you have configured SSH correctly, then you can now use the ssh or scp commands without being prompted for a password. For example:
[grid@node1 ~]$ ssh node2 date Mon Feb 26 23:34:42 UTC 2009 [grid@node1 ~]$ ssh node1 date Mon Feb 26 23:34:48 UTC 2009
If any node prompts for a password, then verify that the ~/.ssh/authorized_keys file on that node contains the correct public keys, and that you have created an Oracle software owner with identical group membership and IDs.
This section contains the following:
Note:
The kernel parameter and shell limit values shown in the following section are recommended values only. For production database systems, Oracle recommends that you tune these values to optimize the performance of the system. Refer to your operating system documentation for more information about tuning kernel parameters.During installation, or when you run the Cluster Verification Utility (cluvfy) with the flag -fixup, a fixup script is generated. This script updates required kernel packages if necessary to minimum values.
If you cannot use the fixup scripts, then review the following table to set values manually:
Note:
If the current value for any parameter is greater than the value listed in this table, then the Fixup scripts do not change the value of that parameter.On SUSE systems only, complete the following steps as needed:
Enter the following command to cause the system to read the /etc/sysctl.conf file when it restarts:
# /sbin/chkconfig boot.sysctl on
On SUSE 10 systems only, use a text editor to change the /etc/sysconfig/boot.sysctl parameter RUN_PARALLEL flag from yes to no.
Enter the GID of the oinstall group as the value for the parameter /proc/sys/vm/hugetlb_shm_group. Doing this grants members of oinstall a group permission to create shared memory segments.
For example, where the oinstall group GID is 501:
# echo 501 > /proc/sys/vm/hugetlb_shm_group
After running this command, use vi to add the following text to /etc/sysctl.conf, and enable the boot.sysctl script to run on system restart:
vm.hugetlb_shm_group=501
Note:
Only one group can be defined as thevm.hugetlb_shm_group.Repeat steps 1 through 3 on all other nodes in the cluster.
To check your OCFS version manually, enter the following commands:
modinfo ocfs2 rpm -qa |grep ocfs2
Ensure that ocfs2console and ocfs2-tools are at least version 1.2.7, and that the other OCFS2 components correspond to the pattern ocfs2-kernel_version-1.2.7 or greater. If you want to install Oracle RAC on a shared home, then the OCFS version must be 1.4.1 or greater.
For information about OCFS2, refer to the following Web site:
http://oss.oracle.com/projects/ocfs2/
|
 Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved. Legal Notices |
|