(% pI:H[4L&71J(#xD֛MFiHKV;s X t J|i/{ Isoo 2Y 'Pm[=ZMbj 5%s1OV~
NM<3oM\)hF&vByzp~<>'cz֓ia%ʋ8Y- DZF]f@ dl\x?Ih\֒ѕRbV2I<1rQ@ & , ^~ ]vw8ǽrnvw~ &u-vm)*<1O#!S('վ 6 5C])Hici6gh
wpNB▉ƭ6 hީlǖ <((((((((((((((;o Sķvo S 0,d V@*r ln'Ɍ?ݜǽ _~o| :{/" UiE{q
o?ƌ9ۜzc@9w~, Copyright © 1994-2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group. This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable: U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle America, Inc., 500 Oracle Parkway, Redwood City, CA 94065. This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications. This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services. If this document is in prerelease status: This documentation is in prerelease status and is intended for demonstration and preliminary use only. It may not be specific to the hardware on which you are using the software. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to this documentation and will not be responsible for any loss, costs, or damages incurred due to the use of this documentation. Client Quick Installation Guide 11g Release 2 (11.2) for IBM: Linux on System z E24327-01 November 2011 This guide describes how to quickly install Oracle Database Client 11g Release 2 (11.2) on IBM: Linux on System z. It includes information about the following: This guide describes how to complete a default installation of Oracle Database Client on a system that does not have any Oracle software installed on it. It describes how to install one of the following installation types: Administrator: Enables applications to connect to an Oracle Database instance on the local system or on a remote system. It also provides tools that enable you to administer Oracle Database. Runtime: Enables applications to connect to an Oracle Database instance on the local system or on a remote system. Instant Client: Enables you to install only the shared libraries required by Oracle Call Interface (OCI), Oracle C++ Call Interface (OCCI), Pro*C, or Java database connectivity (JDBC) OCI applications. This installation type requires much less disk space as compared to the other Oracle Database Client installation types. This guide does not describe how to install the Custom installation type. Where to Get Additional Installation Information For more detailed information about installing Oracle Database Client, refer to Oracle Database Client Installation Guide for Linux. All these guides are available on the product disc. To access them, use a Web browser to open the Before you install the Oracle software, you must complete several tasks as the Note: Following are the steps for installing the software from an X Window System workstation or X terminal: Start a local terminal session, for example, an X terminal ( If you are not installing the software on the local system, then enter the following command to enable the remote host to display X applications on the local X server: For example: If you are not installing the software on the local system, then use the If you are not logged in as the Following are the steps for installing the software from a PC or other system with X server software: Note: Start the X server software. Configure the security settings of the X server software to permit remote hosts to display X applications on the local system. Connect to the remote system where you want to install the software and start a terminal session on that system, for example, an X terminal ( If you are not logged in as the The system must meet the following minimum hardware requirements: The following are the memory requirements for installing Oracle Database 11g Release 2 (11.2): At least 256 MB of physical RAM. To determine the physical RAM size, enter the following command: If the size of the physical RAM is less than the required size, then you must install more memory before continuing. The following table describes the relationship between installed RAM and the configured swap space recommendation: Note: To determine whether the system architecture can run the software, enter the following command: Note: To determine the size of the configured swap space, enter the following command: If necessary, refer to the operating system documentation for information about how to configure additional swap space. To determine the available RAM and swap space, enter the following command: IMPORTANT: Oracle recommends that you take multiple values for the available RAM and swap space before finalizing a value. This is because the available RAM and swap space keep changing depending on the user interactions with the computer. Contact your operating system vendor for swap space allocation guidance for your server. The vendor guidelines supersede the swap space requirements listed in this guide. To determine whether the system architecture can run the software, enter the following command: Note: The following are the disk space requirements for installing Oracle Database 11g Release 2 (11.2): The minimum disk space requirement for a client install in the To determine the amount of disk space available in the If there is less than 400 MB of free disk space available in the Delete unnecessary files from the Set the See Also: Extend the file system that contains the The following table describes the disk space requirements for software files for each installation type on Linux: To determine the amount of free disk space on the system, enter the following command: Depending on the products that you intend to install, verify that the following software are installed on the system. The following or later versions of the operating system are required for Oracle Database 11g Release 2 (11.2): Red Hat Enterprise Linux 4 Update 8 Red Hat Enterprise Linux 5 Update 4 SUSE Linux Enterprise Server 10 SP3 SUSE Linux Enterprise Server 11 SP1 Starting with Oracle Database 11g Release 2 (11.2), the Security Enhanced Linux (SE Linux) feature is supported for Red Hat Enterprise Linux 4, and Red Hat Enterprise Linux 5. Note: Oracle Universal Installer performs checks to verify that the system meets the listed requirements. To ensure that these checks pass, verify the requirements before you start Oracle Universal Installer. To determine the distribution and version of Linux installed, enter the following command: The following are the Kernel requirements for Oracle Database 11g Release 2 (11.2) For Red Hat Enterprise Linux 4 2.6.9 or later For Red Hat Enterprise Linux 5 2.6.18 or later For SUSE Linux Enterprise Server 10 2.6.16.60 or later For SUSE Linux Enterprise Server 11 2.6.32.12 or later To determine whether the required kernel is installed, enter the following command: The following is a sample output displayed by running this command on a Red Hat Enterprise Linux 4.0 system: In this example, the output shows the kernel version ( If the kernel version does not meet the requirement specified earlier in this section, then contact the operating system vendor for information about obtaining and installing kernel updates. The following, or later versions, packages are required for Oracle Database 11g Release 2 (11.2): Note: Oracle recommends that you install your Linux operating system with the default software packages (RPMs), unless you specifically intend to perform a minimal installation, and follow the directions for performing such an installation to ensure that you have all required packages for Oracle software. Oracle recommends that you do not customize RPMs during a default operating system installation. A default installation includes most required packages, and helps you to limit manual checks of package dependencies. You must install the packages (or later versions) listed in the following table. Also, ensure that the list of RPMs and all the prerequisites for these RPMs are installed. If you did not perform a default Linux installation, you intend to use LDAP, and you want to use the scripts Red Hat Enterprise Linux 4 Red Hat Enterprise Linux 5 SUSE Linux Enterprise Server 10 SUSE Linux Enterprise Server 11 See "Oracle ODBC Drivers" for information on ODBC packages. To determine whether the required packages are installed, enter commands similar to the following: If a package is not installed, then install it from the Linux distribution media or download the required package version from the Linux vendor's Web site. The version of GNU C and C++ compilers listed under the "Package Requirements" are supported with these products. Depending on the components you want to use, you must ensure that the following software are installed: You should install ODBC Driver Manager for UNIX. You can download and install the most recent ODBC Driver Manager from the following URL: To use ODBC, you must also install the following additional ODBC RPMs, depending on your operating sytem: On Red Hat Enterprise Linux 4: On Red Hat Enterprise Linux 5: On SUSE Linux Enterprise Server 10: On SUSE Linux Enterprise Server 11: Use JDK 6 (Java SE Development Kit Install the latest Linux-PAM (Pluggable Authentication Modules for Linux) library to enable the system administrator to choose how applications authenticate users. Starting with Oracle Database 11g Release 2 (11.2), the 64-bit client software does not contain any 32-bit client binaries. If you require 32-bit client binaries on 64-bit platforms, then install the 32-bit binaries from the respective 32-bit client software. However, when you install the 32-bit client binaries on 64-bit platforms, the installer checks for the existence of 32-bit software such as the packages. See Also: The following products are certified for use with: Pro* COBOL Micro Focus Server Express 5.1 Web browsers must support Java Script, and the HTML 4.0 and CSS 1.0 standards. The following Web browsers are supported for Oracle Enterprise Manager Database Control: Netscape Navigator 8.1 Netscape Navigator 9.0 Microsoft Internet Explorer 6.0 SP2 Microsoft Internet Explorer 7.0 SP1 Microsoft Internet Explorer 8.0 Microsoft Internet Explorer 9.0 Firefox 2.0 Firefox 3.0.7 Firefox 3.5 Firefox 3.6 Safari 3.1 Safari 3.2 Safari 4.0.x Google Chrome 3.0 Google Chrome 4.0 The following local operating system groups and users are required if you are installing Oracle Database: The Oracle Inventory group (typically, The Oracle software owner (typically, To determine whether these groups and users exist, and if necessary, to create them, follow these steps: To determine whether the If the output of this command shows the If the The If necessary, enter the following commands to create the To determine whether the If the If necessary, complete one of the following actions: If the If the This command creates the Enter the following command to set the password of the Note: To create the Oracle base directory: Enter the following command to display information about all mounted file systems: This command displays information about all the file systems mounted on the system, including: The physical device name The total amount, used amount, and available amount of disk space The mount point directory for that file system From the display, identify either one or two file systems that meet the disk space requirements mentioned earlier in this section. Note the name of the mount point directory for each file system that you identified. Enter commands similar to the following to create the recommended subdirectories in the mount point directory that you identified and set the appropriate owner, group, and permissions on them: For example: You run Oracle Universal Installer from the Set the default file mode creation mask ( Set the To set the Start a new terminal session, for example, an X terminal ( Enter the following command to ensure that X Window applications can display on this system: For example: If you are not logged in to the system where you want to install the software, then log in to that system as the If you are not logged in as the To determine the default shell for the To run the shell startup script, enter one of the following commands: Bash shell: Bourne or Korn shell: C shell: If you are not installing the software on the local computer, then run the following command on the remote computer to set the Bourne, Bash or Korn shell: C shell: In this example, Run the following command on the remote computer to check if the shell and the DISPLAY environmental variable are set correctly: Now to enable X applications, run the following commands on the local computer: To verify that X applications display is set properly, run a X11 based program that comes with the operating system such as In this example, you can find See Also: If you determined that the To determine the free disk space on each mounted file system use the following command: If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory: Enter commands similar to the following to set the Bourne, Bash, or Korn shell: C shell: Enter commands similar to the following to set the Bourne, Bash, or Korn shell: C shell: In this example, Enter the following commands to ensure that the Bourne, Bash, or Korn shell: C shell: Note: On most Linux systems, the product disc mounts automatically when you insert it into the drive. If the disc does not mount automatically, then follow these steps to mount it: Enter a command similar to the following to eject the currently mounted disc, then remove it from the drive: Red Hat Enterprise Linux: SUSE Linux Enterprise Server: In these examples, Insert the DVD into the disc drive. To verify that the disc mounted automatically, enter a command similar to the following: Red Hat Enterprise Linux: SUSE Linux Enterprise Server: If this command fails to display the contents of the disc, then enter a command similar to the following: Red Hat Enterprise Linux: SUSE Linux Enterprise Server: In these examples, After configuring the To start Oracle Universal Installer, enter the following command: If Oracle Universal Installer does not start, then refer to Oracle Database Client Quick Installation Guide for Linux x86-64 for information about how to troubleshoot X Window display problems. The following table describes the recommended action for each Oracle Universal Installer screen. Use the following guidelines to complete the installation: If you need more assistance, or to choose an option that is not a default, then click Help for additional information. If you encounter errors while installing or linking the software, then refer to Oracle Database Installation Guide for information about troubleshooting. Note: If you have an existing Oracle Database Client 11g Release 2 (11.2) installed on your system, the Select Installation Mode screen is displayed. Select New Install to install Oracle Database Client software in to a new location. Starting with Oracle Database 11g Release 2 (11.2.0.2), if you want to upgrade an earlier release of Oracle Database Client, then select Upgrade and follow the instructions in "Performing an In-place Oracle Database Client Upgrade" In the Select Installation Type screen, select the type of installation: Instant Client, Administrator, or Runtime and click Next. Starting with Oracle Database 11. Release 2 (11.2.0.2), you can use the Software Updates feature to dynamically download and apply latest updatesIn the Download Software Updates screen, select one of the following options and click Next: Use My Oracle Support credentials for download to download and apply the latest software updates. Click Proxy Settings to configure a proxy for Oracle Universal Installer to use to connect to the Internet. Provide the proxy server information for your site, along with a user account that has access to the local area network through which the server is connecting. Starting with Oracle Database 11g Release 2 (11.2.0.3), you can enter the Proxy Realm information if required. The proxy realm information is case-sensitive. Click Test Connection to ensure that your proxy settings are correctly entered, and the installer can download the updates. Use pre-downloaded software updates to apply previously downloaded software updates. Skip Software Updates if you do not want to apply any updates. The Apply Software Updates screen is displayed if you select to download the software updates or provide the pre-downloaded software downloads location. If you selected Use My Oracle Support credentials for download in the previous screen, then select Download and apply all updates, and click Next. If you selected Use pre-downloaded software updates in the previous screen, then select Apply all updates, and click Next. The Select Product Languages screen enables you to select the language in which you want to run the product. Select the product language from the Available Languages list, transfer it to the Selected Languages list. Click Next. This screen is not displayed if you select Instant Client as the type of installation in Step 2. In the Specify Installation Location screen, enter the following details: Oracle Base: This path appears by default. You can change the path based on your requirement. The Oracle Base section is not displayed if you select Instant Client as the type of installation in Step 2. In the Software Location section, accept the default value or enter the Oracle home directory path in which you want to install Oracle components. The directory path should not contain spaces. Click Next. In the Create Inventory screen, you are prompted by the installer to specify the directory path for central inventory the first time you install Oracle software on your computer. Select the oraInventory Group Name of the operating system group that should own the Oracle Inventory directory (the Oracle Inventory group), and click Next. Note: The Perform Prerequisite Checks screen verifies if your computer meets the minimum system requirements to install the desired product. Click Next. Note: Oracle recommends that you use caution in checking the Ignore All option. If you check this option, then Oracle Universal Installer may not confirm that your system can install Oracle Database successfully. Review the information displayed in the Summary screen, and click Finish. Note: The Install Product screen states the progress of a client installation. After Oracle Database Client is installed, execute the In the Finish screen, click Close to exit Oracle Universal Installer. Starting with Oracle Database 11g Release 2 (11.2.0.2), you can follow the instructions in this section to perform an in-place upgrade of Oracle Database Client 11g Release 2 (11.2): Note: After configuring the See Also: The Select Installation Mode screen is displayed only if you have an existing Oracle Database Client 11g Release 2 (11.2.0.1) or later installed on your system. Select Upgrade to upgrade the existing Oracle Database Client software to the latest version. In the Specify Installation Location screen, accept the default Software Location value or enter the Oracle home directory path in which you want to install Oracle components. The directory path should not contain spaces. Click Next. In the Download Software Updates screen, select one of the following options, and click Next: Use My Oracle Support credentials for download Use pre-downloaded software updates Skip software updates See Step 3 in "Installing Oracle Database Client" for more information about the options in the Download Software Updates screen. The Apply Software Updates screen is displayed if you select to download the software updates or provide the pre-downloaded software updates location. Select either Download and apply all updates or Apply all updates, as applicable, and click Next. See Step 4 in "Installing Oracle Database Client" for more information about the options in the Apply Software Updates screen. The Select Product Languages screen enables you to select the language in which you want to run the product. Select the product language from the Available Languages list, transfer it to the Selected Languages list. Click Next. The Perform Prerequisite Checks screen verifies if your computer meets the minimum system requirements to install the desired product. Click Next. Review the information displayed in the Summary screen, and click Install. The Install Product screen displays the progress of the client upgrade. Review the information in the Finish screen and click Close to exit Oracle Universal Installer. See Also: After you have successfully installed Oracle Database Client, refer to Oracle Database Client Installation Guide for Linux for information about required and optional postinstallation steps. This section contains information about the following: Product Licenses You are welcome to install and evaluate the products included in this media pack for 30 days under the terms of the Trial License Agreement. However, you must purchase a program license if you want to continue using any product after the 30 day evaluation period. See the following section for information about purchasing program licenses. Purchasing Licenses and Version Updates You can purchase program licenses and updated versions of Oracle products from the Oracle Store Web site: Contacting Oracle Support Services If you have purchased Oracle Product Support, you can call Oracle Support Services for assistance 24 hours a day, seven days a week. For information about purchasing Oracle Product Support or contacting Oracle Support Services, go to the Oracle Support Services Web site: Locating Product Documentation Product documentation includes information about configuring, using, or administering Oracle products on any platform. The product documentation for Oracle Database 11g products is available in both HTML and PDF formats in the following locations: On the Oracle Database Documentation Library media: Use a Web browser to view or open the From the Oracle Technology Network (OTN) Web site: To view PDF documents, download the free Adobe Acrobat Reader from the Adobe Web site, if necessary: For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at Access to Oracle Support Oracle customers have access to electronic support through My Oracle Support. For information, visit Oracle Database Client Quick Installation Guide, 11g Release 2 (11.2) for IBM: Linux on System z E24327-01 Copyright © 2006, 2011, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable: U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle America, Inc., 500 Oracle Parkway, Redwood City, CA 94065. This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group. This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.Oracle Legal Notices
Copyright Notice
Trademark Notice
License Restrictions Warranty/Consequential Damages Disclaimer
Warranty Disclaimer
Restricted Rights Notice
Hazardous Applications Notice
Third-Party Content, Products, and Services Disclaimer
Alpha and Beta Draft Documentation Notice
< /body>
PK
I PK
0Aoa, mimetypePK 0AVt o : iTunesMetadata.plistPK 0AYu META-INF/container.xmlPK 0A[pT O OEBPS/cover.htmPK 0AE0 {
OEBPS/toc.ncxPK 0Ak#: g
OEBPS/content.opfPK 0A_ 0 OEBPS/dcommon/prodbig.gifPK 0AY@
% OEBPS/dcommon/doclib.gifPK 0Aܞ$_ _ & OEBPS/dcommon/oracle-logo.jpgPK 0A I OEBPS/dcommon/contbig.gifPK 0A 4 OEBPS/dcommon/darbbook.cssPK 0AMά" " ! OEBPS/dcommon/O_signature_clr.JPGPK 0APz OEBPS/dcommon/feedbck2.gifPK 0A- OEBPS/dcommon/feedback.gifPK 0Aː5 OEBPS/dcommon/booklist.gifPK 0AN 6 1 | OEBPS/dcommon/cpyr.htmPK 0A!:3 . OEBPS/dcommon/masterix.gifPK 0AeӺ1 , q OEBPS/dcommon/doccd.cssPK 0A7 OEBPS/dcommon/larrow.gifPK 0A# OEBPS/dcommon/indxicon.gifPK 0AS' " y OEBPS/dcommon/leftnav.gifPK 0Ahu, OEBPS/dcommon/uarrow.gifPK 0Al-O J OEBPS/dcommon/oracle.gifPK 0A( OEBPS/dcommon/index.gifPK 0AGC OEBPS/dcommon/bookbig.gifPK 0AJV^ OEBPS/dcommon/rarrow.gifPK 0A枰p k OEBPS/dcommon/mix.gifPK 0Ao"nR
M
OEBPS/dcommon/doccd_epub.jsPK 0Av
I
f OEBPS/dcommon/toc.gifPK 0A
r~$ OEBPS/dcommon/topnav.gifPK 0A1F A OEBPS/dcommon/prodicon.gifPK 0A3(
#
OEBPS/dcommon/bp_layout.cssPK 0A x[? : OEBPS/dcommon/bookicon.gifPK 0Ap*c ^ OEBPS/dcommon/conticon.gifPK 0Aʍ N OEBPS/dcommon/blafdoc.cssPK 0A+ & M0 OEBPS/dcommon/rightnav.gifPK 0Aj e8 8 1 OEBPS/dcommon/oracle-small.JPGPK 0Aއ{& ! k OEBPS/dcommon/help.gifPK 0A
I
kl OEBPS/toc.htmPK ' '
l Oracle® Database
1 Reviewing Information About This Guide
welcome.htm file located in the top-level directory of the media. Platform-specific documentation is available in PDF and HTML formats in the Documentation section..
2 Logging In to the System as root
root user. To log in as the root user, complete one of the following procedures:
xterm).
$ xhost fully_qualified_remote_host_name
$ xhost somehost.us.example.com
ssh, rlogin, or telnet command to connect to the system where you want to install the software:
$ telnet fully_qualified_remote_host_name
root user, then enter the following command to switch user to root:
$ sudo sh
password:
#
xterm).root user on the remote system, then enter the following command to switch user to root:
$ sudo sh
password:
#
3 Checking the Hardware Requirements
3.1 Memory Requirements
# grep MemTotal /proc/meminfo
Available RAM Swap Space Required Between 0 MB and 256 MB 3 times the size of RAM Between 256 MB and 512 MB 2 times the size of RAM Between 512 MB and 2 GB 1.5 times the size of RAM Between 2 GB and 16 GB Equal to the size of RAM More than 16 GB 16 GB
# grep "model name" /proc/cpuinfo
# grep SwapTotal /proc/meminfo
# free
3.2 System Architecture
# uname -m
3.3 Disk Space Requirements
/tmp directory is 400 MB./tmp directory, enter the following command:
# df -k /tmp
/tmp directory, then complete one of the following steps:/tmp directory to meet the disk space requirement.TMP and TMPDIR environment variables when setting the oracle user's environment.
TMP and TMPDIR/tmp directory. If necessary, contact the system administrator for information about extending file systems.
Installation Type Requirement for Software Files Instant Client 220 MB Administrator 1.38 GB Runtime 1.10 GB
# df -k
4 Checking the Software Requirements
4.1 Operating System Requirements
# cat /proc/version
4.2 Kernel Requirements
# uname -r
2.6.9-34.0.1.0.11.ELsmp
2.6.9) and errata level (34.0.1.0.11) on the system.
4.3 Package Requirements
odisrvreg, oidca, or schemasync, then install the Korn shell RPM for your Linux distribution.
binutils-2.15.92.0.2-25 (s390x)
compat-libstdc++-33-3.2.3-47.3 (s390)
compat-libstdc++-33-3.2.3-47.3 (s390x)
gcc-3.4.6-11 (s390x)
gcc-c++-3.4.6-11 (s390x)
glibc-2.3.4-2.43 (s390)
glibc-2.3.4-2.43 (s390x)
glibc-devel-2.3.4-2.43 (s390)
glibc-devel-2.3.4-2.43 (s390x)
libaio-0.3.105-2 (s390)
libaio-0.3.105-2 (s390x)
libaio-devel-0.3.105-2 (s390)
libaio-devel-0.3.105-2 (s390x)
libgcc-3.4.6-11 (s390)
libgcc-3.4.6-11 (s390x)
libstdc++-3.4.6-10.0.1
libstdc++-3.4.6-10.0.1 (32-bit)
libstdc++-devel-3.4.6-10.0.1
libstdc++-devel-3.4.6-10.0.1 (x86_64)
make-3.80
pdksh
sysstat-5.0.5-25.el4 (s390x)
binutils-2.17.50.0.6-12.el5 (s390x)
compat-libstdc++-33-3.2.3-61 (s390)
compat-libstdc++-33-3.2.3-61 (s390x)
gcc-4.1.2-46.el5 (s390x)
gcc-c++-4.1.2-46.el5 (s390x)
glibc-2.5-42(s390)
glibc-2.5-42 (s390x)
glibc-devel-2.5-42 (s390)
glibc-devel-2.5-42 (s390x)
ksh
libaio-0.3.106-3.2 (s390)
libaio-0.3.106-3.2 (s390x)
libaio-devel-0.3.106-3.2 (s390)
libaio-devel-0.3.106-3.2 (s390x)
libgcc-4.1.2-46.el5 (s390)
libgcc-4.1.2-46.el5 (s390x)
libstdc++-4.1.2-46.el5 (s390)
libstdc++-4.1.2-46.el5 (s390x)
libstdc++-devel-4.1.2-46.el5 (s390x)
make-3.81
sysstat-7.0.2-3.el5 (s390x)
binutils-32bit-2.16.91.0.5-23.34.33 (s390x)
gcc-4.1.2_20070115-0.29.6 (s390x)
gcc-c++-4.1.2_20070115-0.29.6 (s390x)
glibc-2.4-31.74.1 (s390x)
glibc-32bit-2.4-31.74.1 (s390x)
glibc-devel-2.4-31.74.1 (s390x)
glibc-devel-32bit-2.4-31.74.1 (s390x)
ksh
libaio-0.3.104-14.2 (s390x)
libaio-32bit-0.3.104-14.2 (s390x)
libaio-devel-0.3.104-14.2 (s390x)
libaio-devel-32bit-0.3.104-14.2 (s390x)
libstdc++-4.1.2_20070115-0.29.6 (s390x)
libstdc++-devel-4.1.2_20070115-0.29.6 (s390x)
make-3.80-202.2 (s390x)
sysstat-8.0.4-1.7.27 (s390x)
binutils-2.20.0-0.7.9 (s390x)
gcc-4.3-62.198 (s390x)
gcc-c++-4.3-62.198 (s390x)
glibc-2.11.1-0.17.4 (s390x)
glibc-32bit-2.11.1-0.17.4 (s390x)
glibc-devel-2.11.1-0.17.4 (s390x)
glibc-devel-32bit-2.11.1-0.17.4 (s390x)
ksh
libaio-0.3.109-0.1.46 (s390x)
libaio-32bit-0.3.109-0.1.46 (s390x)
libaio-devel-0.3.109-0.1.46 (s390x)
libaio-devel-32bit-0.3.109-0.1.46 (s390x)
libstdc++43-4.3.4_20091019-0.7.35 (s390x)
libstdc++43-32bit-4.3.4_20091019-0.7.35 (s390x)
libstdc++43-devel-4.3.4_20091019-0.7.35 (s390x)
libstdc++43-devel-32bit-4.3.4_20091019-0.7.35 (s390x)
libgcc43-4.3.4_20091019-0.7.35 (s390x)
make-3.81
sysstat-8.1.5-7.9.56 (s390x)
# rpm -q package_name
4.4 Compiler Requirements
4.5 Additional Software Requirements
4.5.1 Oracle ODBC Drivers
unixODBC-2.2.11 (32-bit) or laterunixODBC-devel-2.2.11 (64-bit) or laterunixODBC-2.2.11 (64-bit) or laterunixODBC-2.2.11 (32-bit) or laterunixODBC-devel-2.2.11 (64-bit) or laterunixODBC-2.2.11 (64-bit) or laterunixODBC-32 bit-2.2.11 (32-bit) or laterunixODBC-2.2.11 (64-bit) or laterunixODBC-devel-2.2.11 (64-bit) or laterunixODBC-2.2.12 or laterunixODBC-devel-2.2.12 or laterunixODBC-32bit-2.2.12 (32-bit) or later
4.5.2 Oracle JDBC/OCI Drivers
1.6.0.20.8 FP1 or higher) or JDK 5 (1.5.0.12.1 or higher).
4.5.3 Linux-PAM Library
4.5.4 Separate 32-Bit Client Software for 64-Bit Platforms
4.5.5 Programming Languages
4.5.6 Browser Requirements
5 Creating Required Operating System Groups and Users
oinstall)oracle)oinstall group exists, enter the following command:
# more /etc/oraInst.loc
oinstall group name, then the group exists.oraInst.loc file exists, then the output from this command is similar to the following:
inventory_loc=/u01/app/oraInventory
inst_group=oinstall
inst_group parameter shows the name of the Oracle Inven tory group, oinstall.oinstall group:
# /usr/sbin/groupadd oinstall
oracle user exists and belongs to the correct groups, enter the following command:
# id oracle
oracle user exists, then this command displays information about the groups to which the user belongs. The output should be similar to the following, indicating that oinstall is the primary group and dba is a secondary group:
uid=440(oracle) gid=200(oinstall) groups=201(dba),202(oper)
oracle user exists, but its primary group is not oinstall or it is not a member of the dba group, then enter the following command:
# /usr/sbin/usermod -g oinstall -G dba oracle
oracle user does not exist, enter the following command to create it:
# /usr/sbin/useradd -g oinstall -G dba oracle
oracle user and specifies oinstall as the primary group and dba as the secondary group.oracle user:
# passwd oracle
6 Creating Required Directories
# df -h
# mkdir -p /
mount_point/app/
# chown -R oracle:oinstall /mount_point/app/
# chmod -R 775 /mount_point/app/
# mkdir -p /u01/app/
# chown -R oracle:oinstall /u01/app/
# chmod -R 775 /u01/app/
7 Configuring the oracle User's Environment
oracle account. However, before you start Oracle Universal Installer, you must configure the environment of the oracle user. To configure the environment, you must:umask) to 022 in the shell startup file.DISPLAY environment variable.oracle user's environment:xterm).
$ xhost fully_qualified_remote_host_name
$ xhost somehost.us.example.com
oracle user.oracle user, then switch user to oracle:
$ su - oracle
oracle user, enter the following command:
$ echo $SHELL
$ . ./.bash_profile
$ . ./.profile
% source ./.login
DISPLAY variable:
$ export DISPLAY=local_host:0.0
% setenv DISPLAY local_host:0.0
local_host is the host name or IP address of the local computer to use to display Oracle Universal Installer.
echo $SHELL
echo $DISPLAY
$ xhost + fully_qualified_remote_host_name
xclock:
$ xclock
xclock at /usr/X11R6/bin/xclocks. If the DISPLAY variable is set properly, then you can see xclock on your computer screen.
/tmp directory has less than 1 GB of free disk space, then identify a file system with at least 1 GB of free space and set the TMP and TMPDIR environment variables to specify a temporary directory on this file system:
# df -h /tmp
$ sudo mkdir /mount_point/tmp
$ sudo chmod a+wr /mount_point/tmp
# exit
TMP and TMPDIR environment variables:
$ TMP=/mount_point/tmp
$ TMPDIR=/mount_point/tmp
$ export TMP TMPDIR
% setenv TMP /mount_point/tmp
% setenv TMPDIR /mount_point/tmp
ORACLE_BASE and ORACLE_SID environment variables:
$ ORACLE_BASE=/u01/app/oracle
$ ORACLE_SID=sales
$ export ORACLE_BASE ORACLE_SID
% setenv ORACLE_BASE /u01/app/oracle
% setenv ORACLE_SID sales
/u01/app/oracle is the Oracle base directory that you created or identified earlier and sales is the name of the database (typically no more than five characters).ORACLE_HOME and TNS_ADMIN environment variables are not set:
$ unset ORACLE_HOME
$ unset TNS_ADMIN
% unsetenv ORACLE_HOME
% unsetenv TNS_ADMIN
ORACLE_HOME environment variable is set, then Oracle Universal Installer uses the value that it specifies as the default path for the Oracle home directory. However, if you set the ORACLE_BASE environment variable, then Oracle recommends that you unset the ORACLE_HOME environment variable and choose the default path suggested by Oracle Universal Installer.
8 Mounting the Product Disc
$ sudo eject /mnt/dvd
# eject /media/dvd
/mnt/dvd and /media/dvd are the mount point directories for the disc drive.
# ls /mnt/dvd
# ls /media/dvd
# mount -t iso9660 /dev/dvd /mnt/dvd
# mount -t iso9660 /dev/dvd /media/dvd
/mnt/dvd and /media/dvd are the mount point directories for the disc drive.
9 Installing Oracle Database Client
oracle user's environment, start Oracle Universal Installer and install Oracle Database as follows:
$ /mount_point/db/runInstaller
root.sh script as a root user to complete the installation, and click OK.
10 Performing an In-place Oracle Database Client Upgrade
oracle user's environment, start Oracle Universal Installer using the following command:
$ /mount_point/db/runInstaller
11 What to Do Next?
12 Additional Information
index.htm file in the top-level directory on the media.
http://www.oracle.com/technetwork/indexes/documentation/index.html
13 Documentation Accessibility
http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.