162 DBMS_XA

Using DBMS_XA

• Overview

• Security Model

• Constants

• Operational Notes

---

Overview

These subprograms allow a PL/SQL application to define a global transaction branch ID (XID) and associate or disassociate the current session with the transaction branch.

Subsequently, these transaction branches may be prepared and committed by following the two-phase commit protocol. A single-phase commit protocol is also supported if only one resource manager is involved.

Interfaces are also provided for a PL/SQL application to set the timeout values for any new global transaction branches that may start with the current session.

---

Security Model

This package is created under SYS. Operations provided by this package are performed under the current calling user, not under the package owner SYS.Any DBMS_XA subprogram called from an anonymous PL/SQL block is executed using the privileges of the current user. Any DBMS_XA subprogram called from a stored procedure is executed using the privileges of the owner of the stored procedure.

SELECT privilege on SYS.DBA_PENDING_TRANSACTIONS is required for users who need to execute XA_RECOVER subprogram.

FORCE ANY TRANSACTION privilege is required for users who need to manipulate XA transactions created by other users.

---

Constants

The DBMS_XA package uses the constants shown in Table 162-1 for use in the flag field of the XA_START Function and the XA_END Function.

The DBMS_XA package uses the constants shown in Table 162-2 for Possible Return Values

---

Operational Notes

In compliance with the XA specification of the X/Open CAE Standard for Distributed Transaction Processing, XA_PREPARE/COMMIT/ ROLLBACK/FORGET may not be called when the transaction is still associated with the current session. Only after XA_END has been called so that there is not any transaction associated with the current session, the application may call XA_PREPARE/COMMIT/ ROLLBACK/FORGET.

XAER_PROTO error is returned from XA_PREPARE/COMMIT/ROLLBACK/FORGET if a transaction is being associated with the current session.

Prior to calling any of the package subprograms, a connection/session must have already been established to the Oracle database server backend, or a resource manager. Resource manager identifiers are not supported. If multiple resource managers are involved, multiple connections/sessions must be pre-established to each resource manager before calling any the package subprograms. If multiple connections/sessions are established during the course of global transaction processing, the caller must ensure that all of those connections/sessions associated with a specific global transaction branch identifier (XID) are established to the same resource manager.

Data Structures

The DBMS_XA package uses the following OBJECT type and associated TABLE type.

OBJECT Types

• DBMS_XA_XID Object Type

TABLE Types

• DBMS_XA_XID_ARRAY Table Type

---

DBMS_XA_XID Object Type

The PL/SQL XA interface allows the PL/SQL application to define a global transaction branch id (XID) and associate/disassociate the current session with the transaction branch. XID is defined as a PL/SQL object type.

Syntax

TYPE DBMS_XA_XID IS OBJECT(
  formatid      NUMBER,
  gtrid         RAW(64),
  bqual         RAW(64),
  constructor function DBMS_XA_XID(
       gtrid     IN   NUMBER)
    RETURN SELF AS RESULT,
  constructor function DBMS_XA_XID (
       gtrid     IN   RAW, 
       bqual     IN   RAW)
    RETURN SELF AS RESULT,
  constructor function DBMS_XA_XID(
       formatid  IN   NUMBER,
       gtrid     IN   RAW,
       bqual     IN   RAW DEFAULT HEXTORAW('00000000000000000000000000000001'))
    RETURN SELF AS RESULT)

Attributes

---

DBMS_XA_XID_ARRAY Table Type

This type is used to define an array of xid that represent a list of global transaction branches.

Syntax

TYPE DBMS_XA_XID_ARRAY as TABLE of DBMS_XA_XID

Summary of DBMS_XA Subprograms

---

DIST_TXN_SYNC Procedure

This procedure can be used to synchronize in-doubt transactions when one of the Oracle Real Application Clusters (Oracle RAC) instances fails.

Syntax

DBMS_XA.DIST_TXN_SYNC; 

---

XA_COMMIT Function

This function commits the global transaction specified by xid.

Syntax

DBMS_XA.XA_COMMIT (
   xid       IN  DBMS_XA_XID,
   onePhase  IN  BOOLEAN)
RETURN PLS_INTEGER;

Parameters

Return Values

See Table 162-2, "DBMS_XA Constants for Possible Return Values". Possible return values indicating error are: XAER_RMERR, XAER_RMFAIL, XAER_NOTA, XAER_INVAL, or XAER_PROTO. Other possible return values include: XA_OK, XA_RB*, XA_HEURHAZ, XA_HEURCOM, XA_HEURRB, and XA_HEURMIX.

Usage Notes

• An application must not call COMMIT, but instead must call XA_COMMIT to commit the global transaction specified by xid. If a user needs to commit a transaction branch that is created by other users, FORCE ANY TRANSACTION must be granted to the user.

• If onePhase is TRUE, the resource manager should use a one-phase commit protocol to commit the work done on behalf of xid. Otherwise, only if all branches of the global transaction have been prepared successfully and the preceding XA_PREPARE call has returned XA_OK, should XA_COMMIT be called.

• The application must make a separate XA_COMMIT call for each of the transaction branches of the global transaction for which XA_PREPARE has returned XA_OK.

• If the resource manager did not commit the transaction and the parameter onePhase is set to TRUE, the resource manager may return one of the XA_RB* code. Upon return, the resource manager has rolled back the branch's work and has released all held resources.

---

XA_END Function

This function disassociates the current session from the transaction branch specified by xid

A transaction manager calls XA_END when a thread of control finishes, or needs to suspend work on, a transaction branch. This occurs when the application completes a portion of its work, either partially or in its entirety (for example, before blocking on some event in order to let other threads of control work on the branch). When XA_END successfully returns, the calling thread of control is no longer actively associated with the branch but the branch still exists

Syntax

DBMS_XA.XA_END (
   xid   IN  DBMS_XA_XID,
   flag  IN  PLS_INTEGER)
RETURN PLS_INTEGER;

Parameters

Return Values

See Table 162-2, "DBMS_XA Constants for Possible Return Values". Possible return values in error are XAER_RMERR, XAER_RMFAILED, XAER_NOTA, XAER_INVAL, XAER_PROTO, or XA_RB*.

Usage Notes

• TMSUCCESS or TMSUSPEND may be specified in flag, and the transaction branch is disassociated with the current session in detached state if the return value is XA_OK. TMFAIL is not supported. XA_END may be called with either TMSUCCESS or TMSUSPEND to disassociate the transaction branch identified by xid from the current session.

• XA_OK is returned if XA_END succeeds. An application must check the return value and handle error cases. Only when XA_OK is returned, the application should proceed for other normal operations.

• Executing a ROLLBACK statement without calling XA_END first will rollback the changes made by the current transaction. However, the transaction context is still associated with the current session until XA_END is called.

• Executing a COMMIT statement without calling XA_END first will result in ORA-02089: COMMIT is not allowed in a subordinate session.

• Executing a COMMIT or a ROLLBACK statement after XA_END has no effect on the transaction identified by xid, since this transaction is no longer associated with the current session. To commit the transaction ID or the XA_ROLLBACK Function to commit/rollback the transaction specified by the xid.

---

XA_FORGET Function

This function informs the resource manager to forget about a heuristically committed or rolled back transaction branch.

Syntax

DBMS_XA.XA_FORGET (
   xid       IN  DBMS_XA_XID)
RETURN PLS_INTEGER;

Parameters

Return Values

See Table 162-2, "DBMS_XA Constants for Possible Return Values". Possible return values are XA_OK, XAER_RMERR, XAER_RMFAIL, XAER_NOTA, XAER_INVAL, or XAER_PROTO.

---

XA_GETLASTOER Function

This function obtains the last Oracle error code, in case of failure of previous XA calls.

Syntax

DBMS_XA.XA_GETLASTOER  
 RETURN PLS_INTEGER;

Return Values

The return value carries the last Oracle error code.

---

XA_PREPARE Function

This function prepares the transaction branch specified in xid for committing the transaction subsequently if possible.

Syntax

DBMS_XA.XA_PREPARE (
   xid   IN  DBMS_XA_XID)
RETURN PLS_INTEGER;

Parameters

Return Values

See Table 162-2, "DBMS_XA Constants for Possible Return Values". Possible return codes include: XA_OK, XA_RDONLY, XA_RB*, XAER_RMERR, XAER_RMFAIL, XAER_NOTA, XAER_INVAL, or XAER_PROTO.

Usage Notes

• If a user needs to prepare a transaction branch that is created by other users, FORCE ANY TRANSACTION must be granted to the user.

• An application must keep track of all the branches of one global transaction, and prepare each transaction branch. Only if all branches of the global transaction have been prepared successfully and XA_PREPARE has returned XA_OK, the application may proceed to call XA_COMMIT.

---

XA_RECOVER Function

This function obtains a list of prepared or heuristically completed transaction branches from a resource manager.

Syntax

DBMS_XA.XA_RECOVER 
 RETURN DBMS_XA_XID_ARRAY;

Return Values

See DBMS_XA_XID_ARRAY Table Type

Usage Notes

• The flags TMSTARTSCAN, TMENDSCAN, TMNOFLAGS are not supported.

• The privilege SELECT ON DBA_PENDING_TRANSACTIONS must be granted to the user who needs to call XA_RECOVER.

---

XA_ROLLBACK Function

This function informs the resource manager to roll back work done on behalf of a transaction branch.

Syntax

DBMS_XA.XA_ROLLBACK (
   xid       IN  DBMS_XA_XID)
 RETURN PLS_INTEGER;

Parameters

Return Values

See Table 162-2, "DBMS_XA Constants for Possible Return Values". Possible return values are: XA_OK, XA_RB*, XA_HEURHAZ, XA_HEURCOM, XA_HEURRB, or XA_HEURMIX.

Usage Notes

If a user needs to rollback a transaction branch that created by other users, the privilege FORCE ANY TRANSACTION must be granted to the user.

---

XA_SETTIMEOUT Function

This function sets the transaction timeout in seconds for the current session.

Syntax

DBMS_XA.XA_SETTIMEOUT (
   seconds  IN  PLS_INTEGER)
RETURN PLS_INTEGER;

Parameters

Return Values

See Table 162-2, "DBMS_XA Constants for Possible Return Values". Possible return values are XA_OK, XAER_RMERR, XAER_RMFAIL, or XAER_INVAL.

Usage Notes

Only if return value is XA_OK, is the timeout value successfully set.

---

XA_START Function

This function associates the current session with a transaction branch specified by the xid.

Syntax

DBMS_XA.XA_START (
   xid   IN  DBMS_XA_XID,    flag  IN  PLS_INTEGER)  RETURN PLS_INTEGER;

Parameters

Return Values

See Table 162-2, "DBMS_XA Constants for Possible Return Values"

Usage Notes

• If TMJOIN or TMRESUME is specified in flag, the start is for joining an existing transaction branch identified by the xid. TMJOIN flag should be used when the transaction is detached with TMSUCCESS flag. TMRESUME should be used when the transaction branch is detached with TMSUSPEND flag. XA_START may be called with either flag to join an existing transaction branch.

• If TMNOFLAGS is specified in flag, and neither TMJOIN nor TMRESUME is specified, a new transaction branch is to be started. If the transaction branch specified in xid already exists, XA_START returns an XAER_DUPID error code.

• Possible return values in error include: XAER_RMERR, XAER_RMFAIL, XAER_DUPID, XAER_OUTSIDE, XAER_NOTA, XAER_INVAL, and XAER_PROTO.

• XA_OK is returned if XA_START succeeds. An application must check the return value and handle error cases. Only when XA_OK is returned, the PL/SQL application should proceed for other normal operations.Transaction stacking is not supported. If there is an active transaction associated with the current session, may not be called to start or join another transaction. XAER_PROTO will be returned if XA_START is called with an active global transaction branch associated with the session. XAER_OUTSIDE will be returned if XA_START is called with a local transaction associated with the current session.