23 DBMS_AQADM

The DBMS_AQADM package provides procedures to manage Oracle Streams Advanced Queuing (AQ) configuration and administration information.

See Also:

Oracle Streams Advanced Queuing User's Guide
Chapter 243, "Oracle Streams AQ TYPEs" for information about the TYPEs to use with DBMS_AQADM

This chapter contains the following topics:

Using DBMS_AQADM
- Constants
Subprogram Groups
- Queue Table Subprograms
- Privilege Subprograms
- Queue Subprograms
- Subscriber Subprograms
- Notification Subprograms
- Propagation Subprograms
- Oracle Streams AQ Agent Subprograms
- Alias Subprograms
Summary of DBMS_AQADM Subprograms

Using DBMS_AQADM

This section contains the following topics.

Constants

Constants

When using enumerated constants, such as INFINITE, TRANSACTIONAL, or NORMAL_QUEUE, the symbol must be specified with the scope of the packages defining it. All types associated with the administrative interfaces must be prepended with DBMS_AQADM. For example: DBMS_AQADM.NORMAL_QUEUE.

Table 23-1 Enumerated Types in the Administrative Interface

Parameter	Options
`retention`	`0`, `1`, `2`...`INFINITE`
`message_grouping`	`TRANSACTIONAL`, `NONE`
`queue_type`	`NORMAL_QUEUE`, `EXCEPTION_QUEUE`, `NON_PERSISTENT_QUEUE`

See Also:

For more information on the Java classes and data structures used in both DBMS_AQ and DBMS_AQADM, see the DBMS_AQ package.

Subprogram Groups

This DBMS_AQADM package is made up of the following subprogram groups:

Queue Table Subprograms
Privilege Subprograms
Queue Subprograms
Subscriber Subprograms
Notification Subprograms
Propagation Subprograms
Oracle Streams AQ Agent Subprograms
Alias Subprograms

Queue Table Subprograms

Table 23-2 Queue Table Subprograms

Subprograms	Description
ALTER_QUEUE_TABLE Procedure	Alters the existing properties of a queue table
CREATE_QUEUE_TABLE Procedure	Creates a queue table for messages of a predefined type
DROP_QUEUE_TABLE Procedure	Drops an existing queue table
ENABLE_JMS_TYPES Procedure	A precondition for the enqueue of JMS types and XML types
MIGRATE_QUEUE_TABLE Procedure	Upgrades an 8.0-compatible queue table to an 8.1-compatible or higher queue table, or downgrades an 8.1-compatible or higher queue table to an 8.0-compatible queue table
PURGE_QUEUE_TABLE Procedure	Purges messages from queue tables

Privilege Subprograms

Table 23-3 Privilege Subprograms

Subprograms	Description
GRANT_QUEUE_PRIVILEGE Procedure	Grants privileges on a queue to users and roles
GRANT_SYSTEM_PRIVILEGE Procedure	Grants Oracle Streams AQ system privileges to users and roles
REVOKE_QUEUE_PRIVILEGE Procedure	Revokes privileges on a queue from users and roles
REVOKE_SYSTEM_PRIVILEGE Procedure	Revokes Oracle Streams AQ system privileges from users and roles

Queue Subprograms

Table 23-4 Queue Subprograms

Subprograms	Description
ALTER_QUEUE Procedure	Alters existing properties of a queue
CREATE_NP_QUEUE Procedure	Creates a nonpersistent `RAW` queue
CREATE_QUEUE Procedure	Creates a queue in the specified queue table
DROP_QUEUE Procedure	Drops an existing queue
QUEUE_SUBSCRIBERS Function	Returns the subscribers to an 8.0-compatible multiconsumer queue in the PL/SQL index by table collection type `DBMS_AQADM.AQ$_subscriber_list_t`
START_QUEUE Procedure	Enables the specified queue for enqueuing or dequeuing
STOP_QUEUE Procedure	Disables enqueuing or dequeuing on the specified queue

Subscriber Subprograms

Table 23-5 Subscriber Subprograms

Subprograms	Description
ADD_SUBSCRIBER Procedure	Adds a default subscriber to a queue
ALTER_SUBSCRIBER Procedure	Alters existing properties of a subscriber to a specified queue
REMOVE_SUBSCRIBER Procedure	Removes a default subscriber from a queue

Notification Subprograms

Table 23-6 Notification Subprograms

Subprograms	Description
GET_WATERMARK Procedure	Retrieves the value of watermark set by the `SET_WATERMARK` `Procedure`
SET_WATERMARK Procedure	Used for Oracle Streams AQ notification to specify and limit memory use

Propagation Subprograms

Table 23-7 Propagation Subprograms

Subprograms	Description
ALTER_PROPAGATION_SCHEDULE Procedure	Alters parameters for a propagation schedule
DISABLE_PROPAGATION_SCHEDULE Procedure	Disables a propagation schedule
ENABLE_PROPAGATION_SCHEDULE Procedure	Enables a previously disabled propagation schedule
SCHEDULE_PROPAGATION Procedure	Schedules propagation of messages from a queue to a destination identified by a specific database link
UNSCHEDULE_PROPAGATION Procedure	Unschedules previously scheduled propagation of messages from a queue to a destination identified by a specific database link
VERIFY_QUEUE_TYPES Procedure	Verifies that the source and destination queues have identical types

Oracle Streams AQ Agent Subprograms

Table 23-8 Oracle Streams AQ Agent Subprograms

Subprograms	Description
ALTER_AQ_AGENT Procedure	Alters an agent registered for Oracle Streams AQ Internet access, and an Oracle Streams AQ agent that accesses secure queues
CREATE_AQ_AGENT Procedure	Registers an agent for Oracle Streams AQ Internet access using HTTP/SMTP protocols, and creates an Oracle Streams AQ agent to access secure queues
DISABLE_DB_ACCESS Procedure	Revokes the privileges of a specific database user from an Oracle Streams AQ Internet agent
DROP_AQ_AGENT Procedure	Drops an agent that was previously registered for Oracle Streams AQ Internet access
ENABLE_DB_ACCESS Procedure	Grants an Oracle Streams AQ Internet agent the privileges of a specific database user

Alias Subprograms

Table 23-9 Alias Subprograms

Subprograms	Description
ADD_ALIAS_TO_LDAP Procedure	Creates an alias for a queue, agent, or a JMS ConnectionFactory in LDAP
DEL_ALIAS_FROM_LDAP Procedure	Drops an alias for a queue, agent, or JMS ConnectionFactory in LDAP

Summary of DBMS_AQADM Subprograms

Table 23-10 DBMS_AQADM Package Subprograms

Subprograms	Description
ADD_ALIAS_TO_LDAP Procedure	Creates an alias for a queue, agent, or a JMS ConnectionFactory in LDAP
ADD_SUBSCRIBER Procedure	Adds a default subscriber to a queue
ALTER_AQ_AGENT Procedure	Alters an agent registered for Oracle Streams AQ Internet access, and an Oracle Streams AQ agent that accesses secure queues
ALTER_PROPAGATION_SCHEDULE Procedure	Alters parameters for a propagation schedule
ALTER_QUEUE Procedure	Alters existing properties of a queue
ALTER_QUEUE_TABLE Procedure	Alters the existing properties of a queue table
ALTER_SUBSCRIBER Procedure	Alters existing properties of a subscriber to a specified queue
CREATE_AQ_AGENT Procedure	Registers an agent for Oracle Streams AQ Internet access using HTTP/SMTP protocols, and creates an Oracle Streams AQ agent to access secure queues
CREATE_NP_QUEUE Procedure	Creates a nonpersistent `RAW` queue
CREATE_QUEUE Procedure	Creates a queue in the specified queue table
CREATE_QUEUE_TABLE Procedure	Creates a queue table for messages of a predefined type
DEL_ALIAS_FROM_LDAP Procedure	Drops an alias for a queue, agent, or JMS ConnectionFactory in LDAP
DISABLE_DB_ACCESS Procedure	Revokes the privileges of a specific database user from an Oracle Streams AQ Internet agent
DISABLE_PROPAGATION_SCHEDULE Procedure	Disables a propagation schedule
DROP_AQ_AGENT Procedure	Drops an agent that was previously registered for Oracle Streams AQ Internet access
DROP_QUEUE Procedure	Drops an existing queue
DROP_QUEUE_TABLE Procedure	Drops an existing queue table
ENABLE_DB_ACCESS Procedure	Grants an Oracle Streams AQ Internet agent the privileges of a specific database user
ENABLE_JMS_TYPES Procedure	A precondition for the enqueue of JMS types and XML types
ENABLE_PROPAGATION_SCHEDULE Procedure	Enables a previously disabled propagation schedule
GET_WATERMARK Procedure	Retrieves the value of watermark set by the `SET_WATERMARK` `Procedure`
GRANT_QUEUE_PRIVILEGE Procedure	Grants privileges on a queue to users and roles
GRANT_SYSTEM_PRIVILEGE Procedure	Grants Oracle Streams AQ system privileges to users and roles
MIGRATE_QUEUE_TABLE Procedure	Upgrades an 8.0-compatible queue table to an 8.1-compatible or higher queue table, or downgrades an 8.1-compatible or higher queue table to an 8.0-compatible queue table
PURGE_QUEUE_TABLE Procedure	Purges messages from queue tables
QUEUE_SUBSCRIBERS Function	Returns the subscribers to an 8.0-compatible multiconsumer queue in the PL/SQL index by table collection type `DBMS_AQADM.AQ$_subscriber_list_t`
REMOVE_SUBSCRIBER Procedure	Removes a default subscriber from a queue
REVOKE_QUEUE_PRIVILEGE Procedure	Revokes privileges on a queue from users and roles
REVOKE_SYSTEM_PRIVILEGE Procedure	Revokes Oracle Streams AQ system privileges from users and roles
SCHEDULE_PROPAGATION Procedure	Schedules propagation of messages from a queue to a destination identified by a specific database link
SET_WATERMARK Procedure	Used for Oracle Streams AQ notification to specify and limit memory use
START_QUEUE Procedure	Enables the specified queue for enqueuing or dequeuing
STOP_QUEUE Procedure	Disables enqueuing or dequeuing on the specified queue
UNSCHEDULE_PROPAGATION Procedure	Unschedules previously scheduled propagation of messages from a queue to a destination identified by a specific database link
VERIFY_QUEUE_TYPES Procedure	Verifies that the source and destination queues have identical types

ADD_ALIAS_TO_LDAP Procedure

This procedure creates an alias for a queue, agent, or a JMS ConnectionFactory in LDAP. The alias will be placed directly under the database server's distinguished name in LDAP hierarchy.

Syntax

DBMS_AQADM.ADD_ALIAS_TO_LDAP(
   alias          IN VARCHAR2,
   obj_location   IN VARCHAR2);

Parameters

Table 23-11 ADD_ALIAS_TO_LDAP Procedure Parameters

Parameter	Description
`alias`	Name of the alias. Example: `west_shipping.`
`obj_location`	The distinguished name of the object (queue, agent or connection factory) to which `alias` refers.

Usage Notes

This method can be used to create aliases for queues, agents, and JMS ConnectionFactory objects. These object must exist before the alias is created. These aliases can be used for JNDI lookup in JMS and Oracle Streams AQ Internet access.

ADD_SUBSCRIBER Procedure

This procedure adds a default subscriber to a queue.

Syntax

DBMS_AQADM.ADD_SUBSCRIBER (
   queue_name      IN    VARCHAR2,
   subscriber      IN    sys.aq$_agent,
   rule            IN    VARCHAR2 DEFAULT NULL,
   transformation  IN    VARCHAR2 DEFAULT NULL
   queue_to_queue  IN    BOOLEAN DEFAULT FALSE,
   delivery_mode   IN    PLS_INTEGER DEFAULT DBMS_AQADM.PERSISTENT);

Parameters

Table 23-12 ADD_SUBSCRIBER Procedure Parameters

Parameter	Description
`queue_name`	Name of the queue.
`subscriber`	Agent on whose behalf the subscription is being defined.
`rule`	A conditional expression based on the message properties, the message data properties and PL/SQL functions. A rule is specified as a Boolean expression using syntax similar to the `WHERE` clause of a SQL query. This Boolean expression can include conditions on message properties, user data properties (object payloads only), and PL/SQL or SQL functions (as specified in the where clause of a SQL query). Currently supported message properties are `priority` and `corrid`. To specify rules on a message payload (object payload), use attributes of the object type in clauses. You must prefix each attribute with `tab`.`user_data` as a qualifier to indicate the specific column of the queue table that stores the payload. The rule parameter cannot exceed 4000 characters.
`transformation`	Specifies a transformation that will be applied when this subscriber dequeues the message. The source type of the transformation must match the type of the queue. If the subscriber is remote, then the transformation is applied before propagation to the remote queue.
`queue_to_queue`	If `TRUE`, propagation is from queue-to-queue.
`delivery_mode`	The administrator may specify one of `DBMS_AQADM`.`PERSISTENT`, `DBMS_AQADM`.`BUFFERED`, or `DBMS_AQADM`.`PERSISTENT_OR_BUFFERED` for the delivery mode of the messages the subscriber is interested in. This parameter will not be modifiable by `ALTER_SUBSCRIBER`.

Usage Notes

A program can enqueue messages to a specific list of recipients or to the default list of subscribers. This operation only succeeds on queues that allow multiple consumers. This operation takes effect immediately, and the containing transaction is committed. Enqueue requests that are executed after the completion of this call will reflect the new behavior.

Any string within the rule must be quoted:

rule   => 'PRIORITY <= 3 AND CORRID =  ''FROM JAPAN'''

Note that these are all single quotation marks.

ALTER_AQ_AGENT Procedure

This procedure alters an agent registered for Oracle Streams AQ Internet access. It is also used to alter an Oracle Streams AQ agent that accesses secure queues.

See Also:

Oracle Streams Concepts and Administration for information about secure queues

Syntax

DBMS_AQADM.ALTER_AQ_AGENT (
  agent_name                IN VARCHAR2,
  certificate_location      IN VARCHAR2 DEFAULT NULL,
  enable_http               IN BOOLEAN DEFAULT FALSE,
  enable_smtp               IN BOOLEAN DEFAULT FALSE,
  enable_anyp               IN BOOLEAN DEFAULT FALSE )

Parameters

Table 23-13 ALTER_AQ_AGENT Procedure Parameters

Parameter	Description
`agent_name`	Specifies the username of the Oracle Streams AQ Internet agent.
`certification_location`	Agent's certificate location in LDAP (default is `NULL`). If the agent is allowed to access Oracle Streams AQ through SMTP, then its certificate must be registered in LDAP. For access through HTTP, the certificate location is not required.
`enable_http`	`TRUE` means the agent can access Oracle Streams AQ through HTTP. `FALSE` means the agent cannot access Oracle Streams AQ through HTTP.
`enable_smtp`	`TRUE` means the agent can access Oracle Streams AQ through SMTP (e-mail). `FALSE` means the agent cannot access Oracle Streams AQ through SMTP.
`enable_anyp`	`TRUE` means the agent can access Oracle Streams AQ through any protocol (HTTP or SMTP).

ALTER_PROPAGATION_SCHEDULE Procedure

This procedure alters parameters for a propagation schedule.

Syntax

DBMS_AQADM.ALTER_PROPAGATION_SCHEDULE ( 
   queue_name           IN    VARCHAR2, 
   destination          IN    VARCHAR2 DEFAULT NULL,
   duration             IN    NUMBER   DEFAULT NULL, 
   next_time            IN    VARCHAR2 DEFAULT NULL, 
   latency              IN    NUMBER   DEFAULT 60,
   destination_queue    IN    VARCHAR2 DEFAULT NULL);

Parameters

Table 23-14 ALTER_PROPAGATION_SCHEDULE Procedure Parameters

Parameter	Description
`queue_name`	Name of the source queue whose messages are to be propagated, including the schema name. If the schema name is not specified, then it defaults to the schema name of the user.
`destination`	Destination database link. Messages in the source queue for recipients at this destination are propagated. If it is `NULL`, then the destination is the local database and messages are propagated to other queues in the local database. The length of this field is currently limited to 128 bytes, and if the name is not fully qualified, then the default domain name is used.
`duration`	Duration of the propagation window in seconds. A `NULL` value means the propagation window is forever or until the propagation is unscheduled.
`next_time`	Date function to compute the start of the next propagation window from the end of the current window. If this value is `NULL`, then propagation is stopped at the end of the current window. For example, to start the window at the same time every day, `next_time` should be specified as `SYSDATE` `+` `1` `-` `duration/86400`.
`latency`	Maximum wait, in seconds, in the propagation window for a message to be propagated after it is enqueued. The default value is 60. Caution: if latency is not specified for this call, then latency will over-write any existing value with the default value. For example, if the latency is 60 seconds and there are no messages to be propagated during the propagation window, then messages from that queue for the destination are not propagated for at least 60 more seconds. It will be at least 60 seconds before the queue will be checked again for messages to be propagated for the specified destination. If the latency is 600, then the queue will not be checked for 10 minutes and if the latency is 0, then a job queue process will be waiting for messages to be enqueued for the destination and as soon as a message is enqueued it will be propagated.
`destination_queue`	Name of the target queue to which messages are to be propagated in the form of a `dblink`

ALTER_QUEUE Procedure

This procedure alters existing properties of a queue. The parameters max_retries, retention_time, and retry_delay are not supported for nonpersistent queues.

Syntax

DBMS_AQADM.ALTER_QUEUE (
   queue_name        IN    VARCHAR2,
   max_retries       IN    NUMBER   DEFAULT NULL,
   retry_delay       IN    NUMBER   DEFAULT NULL,
   retention_time    IN    NUMBER   DEFAULT NULL,
   auto_commit       IN    BOOLEAN  DEFAULT TRUE,
   comment           IN    VARCHAR2 DEFAULT NULL);

Parameters

Table 23-15 ALTER_QUEUE Procedure Parameters

Parameter	Description
`queue_name`	Name of the queue that is to be altered
`max_retries`	Limits the number of times a dequeue with `REMOVE` mode can be attempted on a message. The maximum value of `max_retries` is 2**31 -1. A message is moved to an exception queue if `RETRY_COUNT` is greater than `MAX_RETRIES`. `RETRY_COUNT` is incremented when the application issues a rollback after executing the dequeue. If a dequeue transaction fails because the server process dies (including `ALTER` `SYSTEM` `KILL` `SESSION`) or `SHUTDOWN` `ABORT` on the instance, then `RETRY_COUNT` is not incremented. Note that `max_retries` is supported for all single consumer queues and 8.1-compatible or higher multiconsumer queues but not for 8.0-compatible multiconsumer queues.
`retry_delay`	Delay time in seconds before this message is scheduled for processing again after an application rollback. The default is `NULL`, which means that the value will not be altered. Note that `retry_delay` is supported for single consumer queues and 8.1-compatible or higher multiconsumer queues but not for 8.0-compatible multiconsumer queues.
`retention_time`	Retention time in seconds for which a message is retained in the queue table after being dequeued. The default is `NULL`, which means that the value will not be altered.
`auto_commit`	`TRUE` causes the current transaction, if any, to commit before the `ALTER_QUEUE` operation is carried out. The `ALTER_QUEUE` operation become persistent when the call returns. This is the default. `FALSE` means the operation is part of the current transaction and becomes persistent only when the caller enters a commit. Caution: This parameter has been deprecated.
`comment`	User-specified description of the queue. This user comment is added to the queue catalog. The default value is `NULL`, which means that the value will not be changed.

ALTER_QUEUE_TABLE Procedure

This procedure alters the existing properties of a queue table.

Syntax

DBMS_AQADM.ALTER_QUEUE_TABLE (
   queue_table          IN   VARCHAR2, 
   comment              IN   VARCHAR2       DEFAULT NULL,
   primary_instance     IN   BINARY_INTEGER DEFAULT NULL, 
   secondary_instance   IN   BINARY_INTEGER DEFAULT NULL);

Parameters

Table 23-16 ALTER_QUEUE_TABLE Procedure Parameters

Parameter	Description
`queue_table`	Name of a queue table to be created.
`comment`	Modifies the user-specified description of the queue table. This user comment is added to the queue catalog. The default value is `NULL` which means that the value will not be changed.
`primary_instance`	This is the primary owner of the queue table. Queue monitor scheduling and propagation for the queues in the queue table will be done in this instance. The default value is `NULL`, which means that the current value will not be changed.
`secondary_instance`	The queue table fails over to the secondary instance if the primary instance is not available. The default value is `NULL`, which means that the current value will not be changed.

ALTER_SUBSCRIBER Procedure

This procedure alters existing properties of a subscriber to a specified queue. Only the rule can be altered.

Syntax

DBMS_AQADM.ALTER_SUBSCRIBER (
   queue_name     IN    VARCHAR2,
   subscriber     IN    sys.aq$_agent,
   rule           IN    VARCHAR2
   transformation IN    VARCHAR2);

Parameters

Table 23-17 ALTER_SUBSCRIBER Procedure Parameters

Parameter	Description
`queue_name`	Name of the queue.
`subscriber`	Agent on whose behalf the subscription is being altered. See "AQ$_AGENT Type".
`rule`	A conditional expression based on the message properties, the message data properties and PL/SQL functions. The rule parameter cannot exceed 4000 characters. To eliminate the rule, set the rule parameter to `NULL`.
`transformation`	Specifies a transformation that will be applied when this subscriber dequeues the message. The source type of the transformation must match the type of the queue. If the subscriber is remote, then the transformation is applied before propagation to the remote queue.

Usage Notes

This procedure alters both the rule and the transformation for the subscriber. If you want to retain the existing value for either of them, you must specify its old value. The current values for rule and transformation for a subscriber can be obtained from the schema.AQ$queue_table_R and schema.AQ$queue_table_S views.

CREATE_AQ_AGENT Procedure

This procedure registers an agent for Oracle Streams AQ Internet access using HTTP/SMTP protocols. It is also used to create an Oracle Streams AQ agent to access secure queues.

See Also:

Oracle Streams Concepts and Administration for information about secure queues

Syntax

DBMS_AQADM.CREATE_AQ_AGENT (
  agent_name                IN VARCHAR2,
  certificate_location      IN VARCHAR2 DEFAULT NULL,
  enable_http               IN BOOLEAN DEFAULT FALSE,
  enable_smtp               IN BOOLEAN DEFAULT FALSE,
  enable_anyp               IN BOOLEAN DEFAULT FALSE )

Parameters

Table 23-18 CREATE_AQ_AGENT Procedure Parameters

Parameter	Description
`agent_name`	Specifies the username of the Oracle Streams AQ Internet agent.
`certification_location`	Agent's certificate location in LDAP (default is `NULL`). If the agent is allowed to access Oracle Streams AQ through SMTP, then its certificate must be registered in LDAP. For access through HTTP, the certificate location is not required.
`enable_http`	`TRUE` means the agent can access Oracle Streams AQ through HTTP. `FALSE` means the agent cannot access Oracle Streams AQ through HTTP.
`enable_smtp`	`TRUE` means the agent can access Oracle Streams AQ through SMTP (e-mail). `FALSE` means the agent cannot access Oracle Streams AQ through SMTP.
`enable_anyp`	`TRUE` means the agent can access Oracle Streams AQ through any protocol (HTTP or SMTP).

Usage Notes

The SYS.AQ$INTERNET_USERS view has a list of all Oracle Streams AQ Internet agents.

CREATE_NP_QUEUE Procedure

Note:

nonpersistent queues are deprecated as of Release 10gR2. Oracle recommends using buffered messaging.

This procedure creates a nonpersistent RAW queue.

Syntax

DBMS_AQADM.CREATE_NP_QUEUE ( 
   queue_name              IN        VARCHAR2, 
   multiple_consumers      IN        BOOLEAN  DEFAULT FALSE, 
   comment                 IN        VARCHAR2 DEFAULT NULL);

Parameters

Table 23-19 CREATE_NP_QUEUE Procedure Parameters

Parameter Description

Parameter	Description
`queue_name`	Name of the nonpersistent queue that is to be created. The name must be unique within a schema and must follow object name guidelines in Oracle Database SQL Language Reference.
`multiple_consumers`	`FALSE` means queues created in the table can only have one consumer for each message. This is the default. `TRUE` means queues created in the table can have multiple consumers for each message. Note that thi`s` parameter is distinguished at the queue level, because a nonpersistent queue does not inherit this characteristic from any user-created queue table.
`comment`	User-specified description of the queue. This user comment is added to the queue catalog.

queue_name

Name of the nonpersistent queue that is to be created. The name must be unique within a schema and must follow object name guidelines in Oracle Database SQL Language Reference.

multiple_consumers

FALSE means queues created in the table can only have one consumer for each message. This is the default. TRUE means queues created in the table can have multiple consumers for each message.

Note that this parameter is distinguished at the queue level, because a nonpersistent queue does not inherit this characteristic from any user-created queue table.

comment

User-specified description of the queue. This user comment is added to the queue catalog.

Usage Notes

The queue may be either single-consumer or multiconsumer queue. All queue names must be unique within a schema. The queues are created in a 8.1-compatible or higher system-created queue table (AQ$_MEM_SC or AQ$_MEM_MC) in the same schema as that specified by the queue name.

If the queue name does not specify a schema name, the queue is created in the login user's schema. After a queue is created with CREATE_NP_QUEUE, it can be enabled by calling START_QUEUE. By default, the queue is created with both enqueue and dequeue disabled.

You cannot dequeue from a nonpersistent queue. The only way to retrieve a message from a nonpersistent queue is by using the OCI notification mechanism. You cannot invoke the LISTEN call on a nonpersistent queue.

CREATE_QUEUE Procedure

This procedure creates a queue in the specified queue table.

Syntax

DBMS_AQADM.CREATE_QUEUE (
   queue_name          IN       VARCHAR2,
   queue_table         IN       VARCHAR2,
   queue_type          IN       BINARY_INTEGER DEFAULT NORMAL_QUEUE,
   max_retries         IN       NUMBER         DEFAULT NULL,
   retry_delay         IN       NUMBER         DEFAULT 0,
   retention_time      IN       NUMBER         DEFAULT 0,
   dependency_tracking IN       BOOLEAN        DEFAULT FALSE,
   comment             IN       VARCHAR2       DEFAULT NULL,
   auto_commit         IN       BOOLEAN        DEFAULT TRUE);

Parameters

Table 23-20 CREATE_QUEUE Procedure Parameters

Parameter	Description
`queue_name`	Name of the queue that is to be created. The name must be unique within a schema and must follow object name guidelines in Oracle Database SQL Language Reference with regard to reserved characters.
`queue_table`	Name of the queue table that will contain the queue.
`queue_type`	Specifies whether the queue being created is an exception queue or a normal queue. `NORMAL_QUEUE` means the queue is a normal queue. This is the default. `EXCEPTION_QUEUE` means it is an exception queue. Only the dequeue operation is allowed on the exception queue.
`max_retries`	Limits the number of times a dequeue with the `REMOVE` mode can be attempted on a message. The maximum value of `max_retries` is 2**31 -1. A message is moved to an exception queue if `RETRY_COUNT` is greater than `MAX_RETRIES`. `RETRY_COUNT` is incremented when the application issues a rollback after executing the dequeue. If a dequeue transaction fails because the server process dies (including `ALTER` `SYSTEM` `KILL` `SESSION`) or `SHUTDOWN` `ABORT` on the instance, then `RETRY_COUNT` is not incremented. Note that `max_retries` is supported for all single consumer queues and 8.1-compatible or higher multiconsumer queues but not for 8.0-compatible multiconsumer queues.
`retry_delay`	Delay time, in seconds, before this message is scheduled for processing again after an application rollback. The default is 0, which means the message can be retried as soon as possible. This parameter has no effect if `max_retries` is set to 0. Note that `retry_delay` is supported for single consumer queues and 8.1-compatible or higher multiconsumer queues but not for 8.0-compatible multiconsumer queues.
`retention_time`	Number of seconds for which a message is retained in the queue table after being dequeued from the queue. `INFINITE` means the message is retained forever. `NUMBER` is the number of seconds for which to retain the messages. The default is 0, no retention.
`dependency_tracking`	Reserved for future use. `FALSE` is the default. `TRUE` is not permitted in this release.
`comment`	User-specified description of the queue. This user comment is added to the queue catalog.
`auto_commit`	`TRUE` causes the current transaction, if any, to commit before the `CREATE_QUEUE` operation is carried out. The `CREATE_QUEUE` operation becomes persistent when the call returns. This is the default. `FALSE` means the operation is part of the current transaction and becomes persistent only when the caller enters a commit. Caution: This parameter has been deprecated.

Usage Notes

All queue names must be unique within a schema. After a queue is created with CREATE_QUEUE, it can be enabled by calling START_QUEUE. By default, the queue is created with both enqueue and dequeue disabled.

CREATE_QUEUE_TABLE Procedure

This procedure creates a queue table for messages of a predefined type.

Syntax

DBMS_AQADM.CREATE_QUEUE_TABLE (
   queue_table          IN      VARCHAR2,
   queue_payload_type   IN      VARCHAR2,
   storage_clause       IN      VARCHAR2        DEFAULT NULL,
   sort_list            IN      VARCHAR2        DEFAULT NULL,
   multiple_consumers   IN      BOOLEAN         DEFAULT FALSE,
   message_grouping     IN      BINARY_INTEGER  DEFAULT NONE,
   comment              IN      VARCHAR2        DEFAULT NULL,
   auto_commit          IN      BOOLEAN         DEFAULT TRUE,
   primary_instance     IN      BINARY_INTEGER  DEFAULT 0, 
   secondary_instance   IN      BINARY_INTEGER  DEFAULT 0,
   compatible           IN      VARCHAR2        DEFAULT NULL,
   secure               IN      BOOLEAN         DEFAULT FALSE);

Parameters

Table 23-21 CREATE_QUEUE_TABLE Procedure Parameters

Parameter	Description
`queue_table`	Name of a queue table to be created
`queue_payload_type`	Type of the user data stored. See Type Name for valid values for this parameter.
`storage_clause`	Storage parameter. The storage parameter is included in the `CREATE` `TABLE` statement when the queue table is created. The `storage_clause` argument can take any text that can be used in a standard `CREATE TABLE` `storage_clause` argument.The storage parameter can be made up of any combinations of the following parameters: `PCTFREE`, `PCTUSED`, `INITRANS`, `MAXTRANS`, `TABLEPSACE`, `LOB`, and a table storage clause. If a tablespace is not specified here, then the queue table and all its related objects are created in the default user tablespace. If a tablespace is specified here, then the queue table and all its related objects are created in the tablespace specified in the storage clause. See Oracle Database SQL Language Reference for the usage of these parameters.
`sort_list`	The columns to be used as the sort key in ascending order. This parameter has the following format: '`sort_column_1,sort_column_2`' The allowed column names are `priority` and `enq_time`. If both columns are specified, then `sort_column_1` defines the most significant order. After a queue table is created with a specific ordering mechanism, all queues in the queue table inherit the same defaults. The order of a queue table cannot be altered after the queue table has been created. If no sort list is specified, then all the queues in this queue table are sorted by the enqueue time in ascending order. This order is equivalent to FIFO order. Even with the default ordering defined, a dequeuer is allowed to choose a message to dequeue by specifying its `msgid` or `correlation`. `msgid`, `correlation`, and `sequence_deviation` take precedence over the default dequeueing order, if they are specified.
`multiple_consumers`	`FALSE` means queues created in the table can only have one consumer for each message. This is the default. `TRUE` means queues created in the table can have multiple consumers for each message.
`message_grouping`	Message grouping behavior for queues created in the table. `NONE` means each message is treated individually. `TRANSACTIONAL` means messages enqueued as part of one transaction are considered part of the same group and can be dequeued as a group of related messages.
`comment`	User-specified description of the queue table. This user comment is added to the queue catalog.
`auto_commit`	`TRUE` causes the current transaction, if any, to commit before the `CREATE_QUEUE_TABLE` operation is carried out. The `CREATE_QUEUE_TABLE` operation becomes persistent when the call returns. This is the default. `FALSE` means the operation is part of the current transaction and becomes persistent only when the caller enters a commit. Note: This parameter has been deprecated.
`primary_instance`	The primary owner of the queue table. Queue monitor scheduling and propagation for the queues in the queue table are done in this instance. The default value for primary instance is 0, which means queue monitor scheduling and propagation will be done in any available instance.
`secondary_instance`	The queue table fails over to the secondary instance if the primary instance is not available. The default value is 0, which means that the queue table will fail over to any available instance.
`compatible`	The lowest database version with which the queue is compatible. Currently the possible values are either `8.0`, `8.1`, or `10.0`. If the database is in 10.1-compatible mode, the default value is `10.0`. If the database is in 8.1-compatible or 9.2-compatible mode, the default value is `8.1`. If the database is in 8.0 compatible mode, the default value is `8.0`.
`secure`	This parameter must be set to `TRUE` if you want to use the queue table for secure queues. Secure queues are queues for which AQ agents must be associated explicitly with one or more database users who can perform queue operations, such as enqueue and dequeue. The owner of a secure queue can perform all queue operations on the queue, but other users cannot perform queue operations on a secure queue, unless they are configured as secure queue users.

Usage Notes

The sort keys for dequeue ordering, if any, must be defined at table creation time. The following objects are created at this time:

aq$_queue_table_name_e, a default exception queue associated with the queue table
aq$queue_table_name, a read-only view, which is used by Oracle Streams AQ applications for querying queue data
aq$_queue_table_name_t, an index (or an index organized table (IOT) in the case of multiple consumer queues) for the queue monitor operations
aq$_queue_table_name_i, an index (or an index organized table in the case of multiple consumer queues) for dequeue operations

For 8.1-compatible or higher queue tables, the following index-organized tables are created:

aq$_queue_table_name_s, a table for storing information about the subscribers
aq$_queue_table_name_r, a table for storing information about rules on subscriptions

aq$_queue_table_name_h, an index-organized table for storing the dequeue history data

CLOB, BLOB, and BFILE are valid attributes for Oracle Streams AQ object type payloads. However, only CLOB and BLOB can be propagated using Oracle Streams AQ propagation in Oracle8i release 8.1.5 or later. See the Oracle Streams Advanced Queuing User's Guide for more information.

The default value of the compatible parameter depends on the database compatibility mode in the init.ora. If the database is in 10.1-compatible mode, the default value is 10.0. If the database is in 8.1-compatible or 9.2-compatible mode, the default value is 8.1. If the database is in 8.0 compatible mode, the default value is 8.0

You can specify and modify the primary_instance and secondary_instance only in 8.1-compatible or higher mode. You cannot specify a secondary instance unless there is a primary instance.

DEL_ALIAS_FROM_LDAP Procedure

This procedure drops an alias for a queue, agent, or JMS ConnectionFactory in LDAP.

Syntax

DBMS_AQ.DEL_ALIAS_FROM_LDAP(
   alias IN VARCHAR2);

Parameters

Table 23-22 DEL_ALIAS_FROM_LDAP Procedure Parameters

Parameter	Description
`alias`	The alias to be removed.

DISABLE_DB_ACCESS Procedure

This procedure revokes the privileges of a specific database user from an Oracle Streams AQ Internet agent.

Syntax

DBMS_AQADM.DISABLE_DB_ACCESS (
  agent_name                IN VARCHAR2,
  db_username               IN VARCHAR2)

Parameters

Table 23-23 DISABLE_DB_ACCESS Procedure Parameters

Parameter	Description
`agent_name`	Specifies the username of the Oracle Streams AQ Internet agent.
`db_username`	Specifies the database user whose privileges are to be revoked from the Oracle Streams AQ Internet agent.

Usage Notes

The Oracle Streams AQ Internet agent should have been previously granted those privileges using the ENABLE_DB_ACCESS Procedure.

DISABLE_PROPAGATION_SCHEDULE Procedure

This procedure disables a propagation schedule.

Syntax

DBMS_AQADM.DISABLE_PROPAGATION_SCHEDULE ( 
   queue_name            IN   VARCHAR2, 
   destination           IN   VARCHAR2 DEFAULT NULL,
   destination_queue  IN  VARCHAR2 DEFAULT NULL);

Parameters

Table 23-24 DISABLE_PROPAGATION_SCHEDULE Procedure Parameters

Parameter	Description
`queue_name`	Name of the source queue whose messages are to be propagated, including the schema name. If the schema name is not specified, then it defaults to the schema name of the user.
`destination`	Destination database link. Messages in the source queue for recipients at this destination are propagated. If it is `NULL`, then the destination is the local database and messages are propagated to other queues in the local database. The length of this field is currently limited to 128 bytes, and if the name is not fully qualified, then the default domain name is used.
`destination_queue`	Name of the target queue to which messages are to be propagated in the form of a `dblink`

DROP_AQ_AGENT Procedure

This procedure drops an agent that was previously registered for Oracle Streams AQ Internet access.

Syntax

DBMS_AQADM.DROP_AQ_AGENT (
  agent_name                IN VARCHAR2)

Parameters

Table 23-25 DROP_AQ_AGENT Procedure Parameters

Parameter	Description
`agent_name`	Specifies the username of the Oracle Streams AQ Internet agent

DROP_QUEUE Procedure

This procedure drops an existing queue.

Syntax

DBMS_AQADM.DROP_QUEUE (
   queue_name        IN    VARCHAR2,
   auto_commit       IN    BOOLEAN DEFAULT TRUE);

Parameters

Table 23-26 DROP_QUEUE Procedure Parameters

Parameter Description

Parameter	Description
`queue_name`	Name of the queue that is to be dropped.
`auto_commit`	`TRUE` causes the current transaction, if any, to commit before the `DROP_QUEUE` operation is carried out. The `DROP_QUEUE` operation becomes persistent when the call returns. This is the default. `FALSE` means the operation is part of the current transaction and becomes persistent only when the caller enters a commit. Caution: This parameter has been deprecated.

queue_name

Name of the queue that is to be dropped.

auto_commit

TRUE causes the current transaction, if any, to commit before the DROP_QUEUE operation is carried out. The DROP_QUEUE operation becomes persistent when the call returns. This is the default. FALSE means the operation is part of the current transaction and becomes persistent only when the caller enters a commit.

Caution: This parameter has been deprecated.

Usage Notes

DROP_QUEUE is not allowed unless STOP_QUEUE has been called to disable the queue for both enqueuing and dequeuing. All the queue data is deleted as part of the drop operation.

DROP_QUEUE_TABLE Procedure

This procedure drops an existing queue table.

Syntax

DBMS_AQADM.DROP_QUEUE_TABLE (
   queue_table       IN    VARCHAR2,
   force             IN    BOOLEAN DEFAULT FALSE,
   auto_commit       IN    BOOLEAN DEFAULT TRUE);

Parameters

Table 23-27 DROP_QUEUE_TABLE Procedure Parameters

Parameter Description

Parameter	Description
`queue_table`	Name of a queue table to be dropped.
`force`	`FALSE` means the operation does not succeed if there are any queues in the table. This is the default. `TRUE` means all queues in the table are stopped and dropped automatically.
`auto_commit`	`TRUE` causes the current transaction, if any, to commit before the `DROP_QUEUE_TABLE` operation is carried out. The `DROP_QUEUE_TABLE` operation becomes persistent when the call returns. This is the default. `FALSE` means the operation is part of the current transaction and becomes persistent only when the caller enters a commit. Caution: This parameter has been deprecated.

queue_table

Name of a queue table to be dropped.

force

FALSE means the operation does not succeed if there are any queues in the table. This is the default. TRUE means all queues in the table are stopped and dropped automatically.

auto_commit

TRUE causes the current transaction, if any, to commit before the DROP_QUEUE_TABLE operation is carried out. The DROP_QUEUE_TABLE operation becomes persistent when the call returns. This is the default. FALSE means the operation is part of the current transaction and becomes persistent only when the caller enters a commit.

Caution: This parameter has been deprecated.

Usage Notes

All the queues in a queue table must be stopped and dropped before the queue table can be dropped. You must do this explicitly unless the force option is used, in which case this is done automatically.

ENABLE_DB_ACCESS Procedure

This procedure grants an Oracle Streams AQ Internet agent the privileges of a specific database user.

Syntax

DBMS_AQADM.ENABLE_DB_ACCESS (
  agent_name                IN VARCHAR2,
  db_username               IN VARCHAR2)

Parameters

Table 23-28 ENABLE_DB_ACCESS Procedure Parameters

Parameter	Description
`agent_name`	Specifies the username of the Oracle Streams AQ Internet agent.
`db_username`	Specified the database user whose privileges are to be granted to the Oracle Streams AQ Internet agent.

Usage Notes

The Oracle Streams AQ Internet agent should have been previously created using the CREATE_AQ_AGENT Procedure.

For secure queues, the sender and receiver agent of the message must be mapped to the database user performing the enqueue or dequeue operation.

See Also:

Oracle Streams Concepts and Administration for information about secure queues

The SYS.AQ$INTERNET_USERS view has a list of all Oracle Streams AQ Internet agents and the names of the database users whose privileges are granted to them.

ENABLE_JMS_TYPES Procedure

Enqueue of JMS types and XML types does not work with Oracle Streams Sys.Anydata queues unless you call this procedure after DBMS_STREAMS_ADM.SET_UP_QUEUE. Enabling an Oracle Streams queue for these types may affect import/export of the queue table.

Syntax

DBMS_AQADM.ENABLE_JMS_TYPES (
   queue_table   IN   VARCHAR2);

Parameters

Table 23-29 ENABLE_JMS_TYPES Procedure Parameters

Parameter	Description
`queue_table`	Specifies name of the queue table to be enabled for JMS and XML types.

ENABLE_PROPAGATION_SCHEDULE Procedure

This procedure enables a previously disabled propagation schedule.

Syntax

DBMS_AQADM.ENABLE_PROPAGATION_SCHEDULE ( 
   queue_name         IN   VARCHAR2, 
   destination        IN   VARCHAR2 DEFAULT NULL,
   destination_queue  IN   VARCHAR2  DEFAULT NULL);

Parameters

Table 23-30 ENABLE_PROPAGATION_SCHEDULE Procedure Parameters

Parameter	Description
`queue_name`	Name of the source queue whose messages are to be propagated, including the schema name. If the schema name is not specified, then it defaults to the schema name of the user.
`destination`	Destination database link. Messages in the source queue for recipients at this destination are propagated. If it is `NULL`, then the destination is the local database and messages are propagated to other queues in the local database. The length of this field is currently limited to 128 bytes, and if the name is not fully qualified, then the default domain name is used.
`destination_queue`	Name of the target queue to which messages are to be propagated in the form of a `dblink`

GET_WATERMARK Procedure

This procedure retrieves the value of watermark set by SET_WATERMARK.

Syntax

DBMS_AQADM.GET_WATERMARK (
   wmvalue     OUT      NUMBER);

Parameters

Table 23-31 GET_WATERMARK Procedure Parameter

Parameter	Description
`wmvalue`	Watermark value in megabytes.

GRANT_QUEUE_PRIVILEGE Procedure

This procedure grants privileges on a queue to users and roles. The privileges are ENQUEUE or DEQUEUE. Initially, only the queue table owner can use this procedure to grant privileges on the queues.

Syntax

DBMS_AQADM.GRANT_QUEUE_PRIVILEGE (
   privilege        IN    VARCHAR2,
   queue_name       IN    VARCHAR2,
   grantee          IN    VARCHAR2,
   grant_option     IN    BOOLEAN := FALSE);

Parameters

Table 23-32 GRANT_QUEUE_PRIVILEGE Procedure Parameters

Parameter	Description
`privilege`	The Oracle Streams AQ queue privilege to grant. The options are `ENQUEUE`, `DEQUEUE`, and `ALL`. `ALL` means both `ENQUEUE` and `DEQUEUE`.
`queue_name`	Name of the queue.
`grantee`	Grantee(s). The grantee(s) can be a user, a role, or the `PUBLIC` role.
`grant_option`	Specifies if the access privilege is granted with the `GRANT` option or not. If the privilege is granted with the `GRANT` option, then the grantee is allowed to use this procedure to grant the access privilege to other users or roles, regardless of the ownership of the queue table. The default is `FALSE`.

GRANT_SYSTEM_PRIVILEGE Procedure

This procedure grants Oracle Streams AQ system privileges to users and roles. The privileges are ENQUEUE_ANY, DEQUEUE_ANY, and MANAGE_ANY. Initially, only SYS and SYSTEM can use this procedure successfully.

Syntax

DBMS_AQADM.GRANT_SYSTEM_PRIVILEGE (
   privilege         IN    VARCHAR2,
   grantee           IN    VARCHAR2,
   admin_option      IN    BOOLEAN := FALSE);

Parameters

Table 23-33 GRANT_SYSTEM_PRIVILEGE Procedure Parameters

Parameter Description

Parameter	Description
`privilege`	The Oracle Streams AQ system privilege to grant. The options are `ENQUEUE_ANY`, `DEQUEUE_ANY`, and `MANAGE_ANY`. `ENQUEUE_ANY` means users granted this privilege are allowed to enqueue messages to any queues in the database. `DEQUEUE_ANY` means users granted this privilege are allowed to dequeue messages from any queues in the database. `MANAGE_ANY` means users granted this privilege are allowed to run `DBMS_AQADM` calls on any schemas in the database.
`grantee`	Grantee(s). The grantee(s) can be a user, a role, or the `PUBLIC` role.
`admin_option`	Specifies if the system privilege is granted with the `ADMIN` option or not. If the privilege is granted with the `ADMIN` option, then the grantee is allowed to use this procedure to grant the system privilege to other users or roles. The default is `FALSE`.

privilege

The Oracle Streams AQ system privilege to grant. The options are ENQUEUE_ANY, DEQUEUE_ANY, and MANAGE_ANY. ENQUEUE_ANY means users granted this privilege are allowed to enqueue messages to any queues in the database. DEQUEUE_ANY means users granted this privilege are allowed to dequeue messages from any queues in the database. MANAGE_ANY means users granted this privilege are allowed to run DBMS_AQADM calls on any schemas in the database.

grantee

Grantee(s). The grantee(s) can be a user, a role, or the PUBLIC role.

admin_option

Specifies if the system privilege is granted with the ADMIN option or not.

If the privilege is granted with the ADMIN option, then the grantee is allowed to use this procedure to grant the system privilege to other users or roles. The default is FALSE.

MIGRATE_QUEUE_TABLE Procedure

This procedure upgrades an 8.0-compatible queue table to an 8.1-compatible or higher queue table, or downgrades an 8.1-compatible or higher queue table to an 8.0-compatible queue table.

Syntax

DBMS_AQADM.MIGRATE_QUEUE_TABLE (
   queue_table   IN   VARCHAR2,
   compatible    IN   VARCHAR2);

Parameters

Table 23-34 MIGRATE_QUEUE_TABLE Procedure Parameters

Parameter	Description
`queue_table`	Specifies name of the queue table to be migrated.
`compatible`	Set this to `8.1` to upgrade an 8.0-compatible queue table, or set this to `8.0` to downgrade an 8.1-compatible queue table.

PURGE_QUEUE_TABLE Procedure

This procedure purges messages from queue tables. You can perform various purge operations on both single-consumer and multiconsumer queue tables for persistent and buffered messages.

Syntax

DBMS_AQADM.PURGE_QUEUE_TABLE(
   queue_table        IN   VARCHAR2,
   purge_condition    IN   VARCHAR2,
   purge_options      IN   aq$_purge_options_t);

where type aq$_purge_options_t is described in Chapter 243, "Oracle Streams AQ TYPEs".

Parameters

Table 23-35 PURGE_QUEUE_TABLE Procedure Parameters

Parameter Description

Parameter	Description
`queue_table`	Specifies the name of the queue table to be purged.
`purge_condition`	Specifies the purge condition to use when purging the queue table. The purge condition must be in the format of a SQL `WHERE` clause, and it is case-sensitive. The condition is based on the columns of `aq$queue_table_name` view. When specifying the `purge_condition`, qualify the column names in `aq$queue_table_name` view with `qtview`. To purge all queues in a queue table, set `purge_condition` to either `NULL` (a bare null word, no quotes) or`''` (two single quotes).
`purge_options`	Type `aq$_purge_options_t` contains a `block` parameter and a `delivery_mode` parameter. If `block` is `TRUE`, then an exclusive lock on all the queues in the queue table is held while purging the queue table. This will cause concurrent enqueuers and dequeuers to block while the queue table is purged. The purge call always succeeds if `block` is `TRUE`. The default for `block` is `FALSE`. This will not block enqueuers and dequeuers, but it can cause the purge to fail with an error during high concurrency times. `delivery_mode` is used to specify whether `DBMS_AQADM.PERSISTENT`, `DBMS_AQADM.BUFFERED` or `DBMS_AQADM.PERSISTENT_OR_BUFFERED` types of messages are to be purged. You cannot implement arbitrary purge conditions if buffered messages have to be purged.

queue_table

Specifies the name of the queue table to be purged.

purge_condition

Specifies the purge condition to use when purging the queue table. The purge condition must be in the format of a SQL WHERE clause, and it is case-sensitive. The condition is based on the columns of aq$queue_table_name view.

When specifying the purge_condition, qualify the column names in aq$queue_table_name view with qtview.

To purge all queues in a queue table, set purge_condition to either NULL (a bare null word, no quotes) or'' (two single quotes).

purge_options

Type aq$_purge_options_t contains a block parameter and a delivery_mode parameter.

If block is TRUE, then an exclusive lock on all the queues in the queue table is held while purging the queue table. This will cause concurrent enqueuers and dequeuers to block while the queue table is purged. The purge call always succeeds if block is TRUE. The default for block is FALSE. This will not block enqueuers and dequeuers, but it can cause the purge to fail with an error during high concurrency times.
delivery_mode is used to specify whether DBMS_AQADM.PERSISTENT, DBMS_AQADM.BUFFERED or DBMS_AQADM.PERSISTENT_OR_BUFFERED types of messages are to be purged. You cannot implement arbitrary purge conditions if buffered messages have to be purged.

Usage Notes

You an purge selected messages from the queue table by specifying a purge_condition. Table 23-35 describes these parameters. Messages can be enqueued to and dequeued from the queue table while the queue table is being purged.
A trace file is generated in the udump destination when you run this procedure. It details what the procedure is doing.
This procedure commits batches of messages in autonomous transactions. Several such autonomous transactions may get executed as a part of one purge_queue_table call depending on the number of messages in the queue table.

QUEUE_SUBSCRIBERS Function

This function returns the subscribers to an 8.0-compatible multiconsumer queue in the PL/SQL index by table collection type DBMS_AQADM.AQ$_subscriber_list_t. Each element of the collection is of type sys.aq$_agent. This functionality is provided for 8.1-compatible queues by the AQ$queue_table_name_S view.

Syntax

DBMS_AQADM.QUEUE_SUBSCRIBERS (
   queue_name         IN         VARCHAR2);
RETURN aq$_subscriber_list_t IS

Parameters

Table 23-36 QUEUE_SUBSCRIBERS Function Parameters

Parameter	Description
`queue_name`	Specifies the queue whose subscribers are to be printed.

REMOVE_SUBSCRIBER Procedure

This procedure removes a default subscriber from a queue. This operation takes effect immediately, and the containing transaction is committed. All references to the subscriber in existing messages are removed as part of the operation.

Syntax

DBMS_AQADM.REMOVE_SUBSCRIBER (
   queue_name         IN         VARCHAR2,
   subscriber         IN         sys.aq$_agent);

Parameters

Table 23-37 REMOVE_SUBSCRIBER Procedure Parameters

Parameter	Description
`queue_name`	Name of the queue.
`subscriber`	Agent who is being removed. See AQ$_AGENT Type.

REVOKE_QUEUE_PRIVILEGE Procedure

This procedure revokes privileges on a queue from users and roles. The privileges are ENQUEUE or DEQUEUE.

Syntax

DBMS_AQADM.REVOKE_QUEUE_PRIVILEGE (
   privilege         IN      VARCHAR2,
   queue_name        IN      VARCHAR2,
   grantee           IN      VARCHAR2);

Parameters

Table 23-38 REVOKE_QUEUE_PRIVILEGE Procedure Parameters

Parameter	Description
`privilege`	The Oracle Streams AQ queue privilege to revoke. The options are `ENQUEUE`, `DEQUEUE`, and `ALL`. `ALL` means both `ENQUEUE` and `DEQUEUE`.
`queue_name`	Name of the queue.
`grantee`	Grantee(s). The grantee(s) can be a user, a role, or the `PUBLIC` role. If the privilege has been propagated by the grantee through the `GRANT` option, then the propagated privilege is also revoked.

Usage Notes

To revoke a privilege, the revoker must be the original grantor of the privilege. The privileges propagated through the GRANT option are revoked if the grantor's privileges are revoked.

REVOKE_SYSTEM_PRIVILEGE Procedure

This procedure revokes Oracle Streams AQ system privileges from users and roles. The privileges are ENQUEUE_ANY, DEQUEUE_ANY and MANAGE_ANY. The ADMIN option for a system privilege cannot be selectively revoked.

Syntax

DBMS_AQADM.REVOKE_SYSTEM_PRIVILEGE (
   privilege         IN   VARCHAR2,
   grantee           IN   VARCHAR2);

Parameters

Table 23-39 REVOKE_SYSTEM_PRIVILEGE Procedure Parameters

Parameter	Description
`privilege`	The Oracle Streams AQ system privilege to revoke. The options are `ENQUEUE_ANY`, `DEQUEUE_ANY`, and `MANAGE_ANY`. The `ADMIN` option for a system privilege cannot be selectively revoked.
`grantee`	Grantee(s). The grantee(s) can be a user, a role, or the `PUBLIC` role.

SCHEDULE_PROPAGATION Procedure

This procedure schedules propagation of messages from a queue to a destination identified by a specific database link.

Syntax

DBMS_AQADM.SCHEDULE_PROPAGATION (
   queue_name          IN    VARCHAR2,
   destination         IN    VARCHAR2 DEFAULT NULL,
   start_time          IN    DATE     DEFAULT SYSDATE,
   duration            IN    NUMBER   DEFAULT NULL,
   next_time           IN    VARCHAR2 DEFAULT NULL,
   latency             IN    NUMBER   DEFAULT 60,
   destination_queue   IN    VARCHAR2 DEFAULT NULL);

Parameters

Table 23-40 SCHEDULE_PROPAGATION Procedure Parameters

Parameter	Description
`queue_name`	Name of the source queue whose messages are to be propagated, including the schema name. If the schema name is not specified, then it defaults to the schema name of the administrative user.
`destination`	Destination database link. Messages in the source queue for recipients at this destination are propagated. If it is `NULL`, then the destination is the local database and messages are propagated to other queues in the local database. The length of this field is currently limited to 128 bytes, and if the name is not fully qualified, then the default domain name is used.
`start_time`	Initial start time for the propagation window for messages from the source queue to the destination.
`duration`	Duration of the propagation window in seconds. A `NULL` value means the propagation window is forever or until the propagation is unscheduled.
`next_time`	Date function to compute the start of the next propagation window from the end of the current window. If this value is `NULL`, then propagation is stopped at the end of the current window. For example, to start the window at the same time every day, next_time should be specified as `SYSDATE + 1 - duration/86400.`
`latency`	Maximum wait, in seconds, in the propagation window for a message to be propagated after it is enqueued. For example, if the latency is 60 seconds and there are no messages to be propagated during the propagation window, then messages from that queue for the destination are not propagated for at least 60 more seconds. It is at least 60 seconds before the queue is checked again for messages to be propagated for the specified destination. If the latency is 600, then the queue is not checked for 10 minutes, and if the latency is 0, then a job queue process will be waiting for messages to be enqueued for the destination. As soon as a message is enqueued, it is propagated.
`destination_queue`	Name of the target queue to which messages are to be propagated in the form of a `dblink`

Usage Notes

Messages may also be propagated to other queues in the same database by specifying a NULL destination. If a message has multiple recipients at the same destination in either the same or different queues, the message is propagated to all of them at the same time.

SET_WATERMARK Procedure

This procedure is used for Oracle Streams AQ notification to specify and limit memory use.

Syntax

DBMS_AQADM.SET_WATERMARK (
   wmvalue     IN      NUMBER);

Parameters

Table 23-41 SET_WATERMARK Procedure Parameter

Parameter	Description
`wmvalue`	Watermark value in megabytes.

START_QUEUE Procedure

This procedure enables the specified queue for enqueuing or dequeuing.

Syntax

DBMS_AQADM.START_QUEUE ( 
   queue_name      IN     VARCHAR2,
   enqueue         IN     BOOLEAN DEFAULT TRUE,
   dequeue         IN     BOOLEAN DEFAULT TRUE);

Parameters

Table 23-42 START_QUEUE Procedure Parameters

Parameter	Description
`queue_name`	Name of the queue to be enabled
`enqueue`	Specifies whether `ENQUEUE` should be enabled on this queue. `TRUE` means enable `ENQUEUE`. This is the default. `FALSE` means do not alter the current setting.
`dequeue`	Specifies whether `DEQUEUE` should be enabled on this queue. `TRUE` means enable `DEQUEUE`. This is the default. `FALSE` means do not alter the current setting.

Usage Notes

After creating a queue, the administrator must use START_QUEUE to enable the queue. The default is to enable it for both ENQUEUE and DEQUEUE. Only dequeue operations are allowed on an exception queue. This operation takes effect when the call completes and does not have any transactional characteristics.

STOP_QUEUE Procedure

This procedure disables enqueuing or dequeuing on the specified queue.

Syntax

DBMS_AQADM.STOP_QUEUE (   
   queue_name      IN   VARCHAR2,
   enqueue         IN   BOOLEAN DEFAULT TRUE,
   dequeue         IN   BOOLEAN DEFAULT TRUE,
   wait            IN   BOOLEAN DEFAULT TRUE);

Parameters

Table 23-43 STOP_QUEUE Procedure Parameters

Parameter	Description
`queue_name`	Name of the queue to be disabled
`enqueue`	Specifies whether `ENQUEUE` should be disabled on this queue. `TRUE` means disable `ENQUEUE`. This is the default. `FALSE` means do not alter the current setting.
`dequeue`	Specifies whether `DEQUEUE` should be disabled on this queue. `TRUE` means disable `DEQUEUE`. This is the default. `FALSE` means do not alter the current setting.
`wait`	Specifies whether to wait for the completion of outstanding transactions. `TRUE` means wait if there are any outstanding transactions. In this state no new transactions are allowed to enqueue to or dequeue from this queue. `FALSE` means return immediately either with a success or an error.

Usage Notes

By default, this call disables both ENQUEUE and DEQUEUE. A queue cannot be stopped if there are outstanding transactions against the queue. This operation takes effect when the call completes and does not have any transactional characteristics.

UNSCHEDULE_PROPAGATION Procedure

This procedure unschedules previously scheduled propagation of messages from a queue to a destination identified by a specific database link.

Syntax

DBMS_AQADM.UNSCHEDULE_PROPAGATION (
   queue_name         IN  VARCHAR2,
   destination        IN  VARCHAR2 DEFAULT NULL
   destination_queue  IN  VARCHAR2 DEFAULT NULL);

Parameters

Table 23-44 UNSCHEDULE_PROPAGATION Procedure Parameters

Parameter	Description
`queue_name`	Name of the source queue whose messages are to be propagated, including the schema name. If the schema name is not specified, then it defaults to the schema name of the administrative user.
`destination`	Destination database link. Messages in the source queue for recipients at this destination are propagated. If it is `NULL`, then the destination is the local database and messages are propagated to other queues in the local database. The length of this field is currently limited to 128 bytes, and if the name is not fully qualified, then the default domain name is used.
`destination_queue`	Name of the target queue to which messages are to be propagated in the form of a `dblink`

VERIFY_QUEUE_TYPES Procedure

This procedure verifies that the source and destination queues have identical types. The result of the verification is stored in the table sys.aq$_message_types, overwriting all previous output of this command.

Syntax

DBMS_AQADM.VERIFY_QUEUE_TYPES (
   src_queue_name    IN    VARCHAR2,
   dest_queue_name   IN    VARCHAR2,
   destination       IN    VARCHAR2 DEFAULT NULL,
   rc                OUT   BINARY_INTEGER);

Parameters

Table 23-45 VERIFY_QUEUE_TYPES Procedure Parameters

Parameter	Description
`src_queue_name`	Name of the source queue whose messages are to be propagated, including the schema name. If the schema name is not specified, then it defaults to the schema name of the user.
`dest_queue_name`	Name of the destination queue where messages are to be propagated, including the schema name. If the schema name is not specified, then it defaults to the schema name of the user.
`destination`	Destination database link. Messages in the source queue for recipients at this destination are propagated. If it is `NULL`, then the destination is the local database and messages are propagated to other queues in the local database. The length of this field is currently limited to 128 bytes, and if the name is not fully qualified, then the default domain name is used.
`rc`	Return code for the result of the procedure. If there is no error, and if the source and destination queue types match, then the result is 1. If they do not match, then the result is 0. If an Oracle error is encountered, then it is returned in `rc`.